AEM FUEL PUMP DIY INSTALLATION GUIDE | 2015-2020 SUBARU WRX STI

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ต.ค. 2024

ความคิดเห็น • 67

  • @paulmarsdensr8199
    @paulmarsdensr8199 5 ปีที่แล้ว +11

    A very detailed description list of parts and links to great information man. Great background music too. Keep grinding man. Subarus forever.

  • @octurbojoe
    @octurbojoe 5 ปีที่แล้ว +7

    When I did mine, I totally forgot I had a full tank. Fuel spilled under the car and down the driveway. Luckily I had a bag of sand laying around in the garage to soak it up.
    Also, another way to make sure the pump is fully primed is to listen in the engine bay for humming after cycling. If there's no noise, no engine leaks, fuse installed, and no start/bad readings, chances are the one of the o-rings got displaced and the pump is sucking air.

  • @cassiejvance7496
    @cassiejvance7496 5 ปีที่แล้ว +4

    Sir, I have to commend your bravery. I have worked on all of my own cars the last 30+ years and plenty of fuel filters, but this was way past me. Great job done, love your in depth videos. Thank you

  • @nathanfuchs1998
    @nathanfuchs1998 5 ปีที่แล้ว +2

    Have a '17 STI getting transported to the local CarMax yay! #firstcar Your vids have definitely been an inspiration!

  • @chandlerdunning4698
    @chandlerdunning4698 4 ปีที่แล้ว

    Such an underrated channel. Great DIY

  • @SpencerHogg
    @SpencerHogg 5 ปีที่แล้ว +1

    Buddy, nice job on the install for this!! 🤘

  • @joshgorillz
    @joshgorillz 3 ปีที่แล้ว

    Thank you for the video! There’s a recall on the fuel pump so this just gives me an excuse to get an AEM pump 🤙🤙

  • @cruzpartida3758
    @cruzpartida3758 4 ปีที่แล้ว +1

    This is the Best fuel pump tutorial out there. Do you need these for flex fuel or it’s not necessary ?

  • @WRXMAN-ms2mm
    @WRXMAN-ms2mm 5 ปีที่แล้ว

    Good tip on fuel levels 👍. I will remember that when I go to install the Verus Engineering Fuel Starvation Door on my WRX. Thought you might have considered that part as well when you were swapping the fuel pump out. The fuel door (flap) part is in line with your philosophy of maximizing reliability. Can’t fault you though it’s pricey $$ for such a tiny plastic part.

  • @TheFatlittleazain
    @TheFatlittleazain 2 ปีที่แล้ว

    I wish I had watched this video this weekend before I installed. My tuner told me today I needed to use 2 o rings instead of 1. Why did you opt for only 1?

  • @LosMt2
    @LosMt2 3 ปีที่แล้ว

    I just did my AEM fuel pump upgrade on my 2020 WRX and my fuel basket was different. Was actually similar to my 2015 FRS one and has a joined clip under the pump that has to be separate like in the FRS duel pump upgrade

  • @fernandor887
    @fernandor887 5 หลายเดือนก่อน

    Can you install the fuel pump with stock injectors

  • @300atsheridan
    @300atsheridan 5 ปีที่แล้ว +3

    Can I get a link for your closing remix of Juicy? Thanks in advance.

  • @ItsSnipes
    @ItsSnipes 3 ปีที่แล้ว +1

    This might be a dumb question but does anyone know if the installation is the same on a 2018 wrx? I don’t know if the pumps are the same

  • @BP-uj9uq
    @BP-uj9uq 3 ปีที่แล้ว

    Hey at the end when your looking at your access port why did it say 2.4 on inj duty cycle? Mine reads the same and i cannot figure out why??? any help would be great!

  • @abn2684
    @abn2684 4 ปีที่แล้ว

    Is this the same as the wrx?

  • @davidhan100
    @davidhan100 5 ปีที่แล้ว +3

    Link to that biggie mashup please!

  • @mikef2492
    @mikef2492 5 ปีที่แล้ว

    “Yep it’s good fuck it” same lol

  • @2twistedmoto
    @2twistedmoto 3 ปีที่แล้ว

    From what I was told I need to buy an extra install kit to make it plug and play is that right? Or else it has ti be hard wired?

  • @joetalon
    @joetalon 5 ปีที่แล้ว +5

    You supose to put the plastic spacer and both (2) O-rings!

    • @prodigy2k7
      @prodigy2k7 4 ปีที่แล้ว

      Which part of the video?

  • @Billy_084
    @Billy_084 2 ปีที่แล้ว

    Should I get some injectors and fuel pump from ebay?

  • @javierdanielalvarez6398
    @javierdanielalvarez6398 2 ปีที่แล้ว

    You didn’t have any issues with your tune ?

  • @gdtbsr3370
    @gdtbsr3370 3 ปีที่แล้ว

    do i take the oem o ring out ans replace wtih the new o ring provided? only 1 oring or 2? aem provided 2 orings.

  • @mainounger
    @mainounger 3 ปีที่แล้ว

    Were you supposed to used 2 o ring instead of one

  • @Daveeed429
    @Daveeed429 5 ปีที่แล้ว

    Bro move to Florida where it's car show season ALL year long and you'll be closer to Casey 😜🤙🏼

    • @CarsWithJR
      @CarsWithJR  5 ปีที่แล้ว

      Florida is a possibility. I'm tired of cold rain. lol

  • @cjsterlace
    @cjsterlace 4 ปีที่แล้ว

    Thank you so much for this

  • @connerwillson
    @connerwillson 2 ปีที่แล้ว

    Hi! What tools are needed for the install?

  • @piceyo1
    @piceyo1 3 ปีที่แล้ว

    I’m having trouble closing the top and the bolts don’t fully go in the holes to the top bracket

  • @Dave-so7sf
    @Dave-so7sf 5 ปีที่แล้ว

    Humm reading fuel pressure final on the gauges 😃.

  • @2mtx12
    @2mtx12 3 ปีที่แล้ว

    Thanks man 🤘🏿🤘🏿🤙🏿

  • @silvetrelomeli7815
    @silvetrelomeli7815 5 ปีที่แล้ว

    Hey bro I’ve been watching your vids for a cool while since you had the wrx and I haven’t commented in a long time but are you looking forward to the nostrum HPLP if they ever make it for the STI PLATFORM, since they bearly made it for wrx and t pretty much let’s yu go full e85 to e105

  • @marcerab16
    @marcerab16 2 ปีที่แล้ว +1

    How the heck did you get that stupid crush gasket on with just your hands I'm about ready to throw the crap in the yard and just forget that piece

  • @brendenfox9518
    @brendenfox9518 3 ปีที่แล้ว

    Did you have to have a base tune ready for your egr and tgv deletes and flex fuel sensor and fuel pump and boost controller. I did all mine at one shot and my car idled for 10-12 seconds and shut off. Can’t get it to start now i don’t have base tune yet

    • @949wrx9
      @949wrx9 3 ปีที่แล้ว

      Did you get this worked out? Curious, because I want to do the same.

    • @GaragebuiltOriginal
      @GaragebuiltOriginal 3 ปีที่แล้ว

      You cannot do that.

    • @Ieatzboltz
      @Ieatzboltz 2 ปีที่แล้ว

      @@949wrx9 what did you end up doing?

  • @thepseudomasterchef7238
    @thepseudomasterchef7238 4 ปีที่แล้ว

    Did you have any issues only using the one o ring? From everything Ive read/heard, two is necessary

    • @CarsWithJR
      @CarsWithJR  4 ปีที่แล้ว

      None at all. Car is running just fine.

  • @Whitegsr98
    @Whitegsr98 4 ปีที่แล้ว +1

    Do you have to get the car tuned if you installed the pump?

  • @w1sconsnedm359
    @w1sconsnedm359 4 ปีที่แล้ว

    Is it possible to run the Aem high flow with stock injector and do you need a tune after installation?

    • @miguellezama2055
      @miguellezama2055 4 ปีที่แล้ว

      W1scons!n Edm yes it is. And no you don’t need a tune with just a fuel pump install.

  • @DiegoRamirez-bk1zb
    @DiegoRamirez-bk1zb 3 ปีที่แล้ว

    My 2019 STI starts and reads 33.3 on fuel duty but shows 0.00 on the fuel press. Final, what do I do? I'm also on a pro tune.

    • @CarsWithJR
      @CarsWithJR  3 ปีที่แล้ว +1

      No worries. Do you have the Cobb fuel pressure sensor?

    • @DiegoRamirez-bk1zb
      @DiegoRamirez-bk1zb 3 ปีที่แล้ว

      @@CarsWithJR Not yet, subaru doesn't come from the factory with a fuel pressure sensor?

  • @3llocomik3
    @3llocomik3 4 ปีที่แล้ว

    I installed mine today.... and car didn’t turn on! Fuel wasn’t pumping to the engine at all! Swapped in back to stock turns right back on! Any ideas? 🙁

    • @CarsWithJR
      @CarsWithJR  4 ปีที่แล้ว

      Assuming all of the connections are good, make sure to prime the system by cycling the key a few times. Also, try using 2 rubber o-rings on the pump.

  • @rekonize007ify
    @rekonize007ify 4 ปีที่แล้ว

    do you remember the part number? thx

  • @aojjem
    @aojjem 4 ปีที่แล้ว

    Are the connectors just plug and play? Or do you have to re wire stuff?

    • @CarsWithJR
      @CarsWithJR  4 ปีที่แล้ว

      No extra wiring needed. It comes with a harness. Plug ad play.

    • @nickwhitaker3540
      @nickwhitaker3540 4 ปีที่แล้ว

      @@CarsWithJR so you just resuse the factory connector?

  • @aaronendo8150
    @aaronendo8150 5 ปีที่แล้ว

    Are you running this on stock injectors? If so is there a gain?

    • @CarsWithJR
      @CarsWithJR  5 ปีที่แล้ว +2

      ID1000cc injectors

  • @waynecarrick6553
    @waynecarrick6553 4 ปีที่แล้ว

    Was that a key I saw you stick in the ignition fam? It’s 2020 Subaru get it together

  • @mjs_ctr8521
    @mjs_ctr8521 4 ปีที่แล้ว

    Yo! do you have any problems with just 1 o ring on the fuel pump?

    • @CarsWithJR
      @CarsWithJR  4 ปีที่แล้ว +1

      Not at all. Some say 1 some say 2. If you can fit 2, I would give it a try.

    • @mjs_ctr8521
      @mjs_ctr8521 4 ปีที่แล้ว

      My WRX Channel thanks JR. im bout to do this install and i am so confused about this o ring shit

  • @steven01cnd
    @steven01cnd 4 ปีที่แล้ว

    Can I install this on my 2019 wrx?

  • @carrazer001
    @carrazer001 4 ปีที่แล้ว

    What app are you gonna use to track your gas , ethanol vs 91 I saw it on one of your videos

  • @timothybracken1728
    @timothybracken1728 5 ปีที่แล้ว +1

    hey what do you do for a living ?

  • @lion50002
    @lion50002 5 ปีที่แล้ว

    First 😎