Polaris RZR XP 1000 Front Diff Rebuild...This Thing Rips!!
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2023
- My buddy Stojko dropped off his RZR XP 1000 for a couple of upgrades before he goes on a bit of a trail ride. we end up doing a rebuild on the front diff and put a few upgrade parts in it as well as a new cover plate on his primary clutch. I hope yas enjoy this video! this razor has some jam and just freakin rips through the trail! thanks for all the support and all the likes, comments and subscribe's 🍻 check out our website
www.rednecks-dirtyhands.com
cheers 🍻 - ยานยนต์และพาหนะ
Hi there! Me and my Fiancé just recently started watching your channel. We love to watch your videos! My fiancé says, he loves you guys and gets a kick out of your laugh! You guys do awesome videos! We are located in Newfoundland Canada!🇨🇦
That is awesome! thank you and cheers to ya's out in Newfoundland 🍻
All "Pollurass" have the magnetized for the front drive shafts
Good morning brother , Enjoy your video's thanks again Turtle
As a guy that owns a number of Polaris products I can assure you... The slop is well within spec lol
I've always left the plastic sprag cages in the front ends, when the plastic one comes apart you typically don't see any collateral damage. When the aluminum cage comes apart it usually scraps everything...
haha gotta love the built in factory clearance!! oh yeah...its supposed to just flop around like that...said no Yamaha owner 🤣🤣🤪 lol but that's a good tip about the cage! yeah I'm sure if the aluminum let's go she's game over up in there!! cheers buddy 🍻
Your videos are awesome , I love how you explain everything when fixing something. Can't wait for snow and thanks a lot Pete 👍 Bill from Gravenhurst
thank you! I'm glad to hear ya find them helpful and entertaining, cheers to Bill from Gravenhurst! 🍻
When Dorf makes an ATV repair video. 😁
🤣🍻
I honestly like them longer. Cheers from Wisconsin 🍻
cheers Wisconsin 🍻
Appreciate the UTV / ATV content too! Thx
thank you! cheers 🍻
Loving the Polaris pete aren't you lol. Yeah great video love watching what's goes on keep it going Pete cheer's.
haha yeah the polaris ain't too shabby! 🤣🤪 thanks for watching! it's awesome to hear the positive feedback! cheers 🍻
I like the longer videos
Good job
thank you! 🍻
Love your videos man, I would love to toss a few cold ones back with you. You seem like a real genuine dude, and that is getting rare these days. God bless ya man, and pray for SNOW!!
thank man! I really appreciate that and I'm always up for cold beer and good company 🍻
Great job Pete!!!
thank you! 🍻
Well done sir!
thank you! 🍻
Love the content. Def educational in many ways............especially when you say things like "slides like a hotdog on sandpaper". That one got me.
🤣 lol I'm glad to hear ya like the videos!! cheers 🍻
Your troubleshooting makes you the great wrench that you are! Nice fix and upgrade Pete ... cheers ! 🍺
thank you! cheers 🍻
Love longer videos hood job Pete
thank you! 🍻
Smooth as butter
Boom shock ah lock ah….tickety boo! Love your videos and your sense of humor Pete! Cheers from northern Ohio!
haha thank you! cheers Ohio 🍻
Great video Pete!!
thank you! 🍻
Absolutely love your videos Pete. I could watch them once a day 7 days a week. Keep them a coming. Pitter patter git at er 😅
haha that's awesome!! I really appreciate that man! cheers 🍻
Just got home from work watching your video with cold beer cheers
that's awesome! cheers 🍻
Longer vids are better than one or two short. Wish I lived closer , have beer for me and I'll have one for you.
haha yessir! cheers 🍻
You make it look easy Pete. I think a RNDH 4 LIFE sticker would be awesome. Keep up the great work.
thanks brother! I think you're right!! a RNDH 4 LIFE sticker ain't a bad idea at all!! I'll talk to Nick and get him to make a few 🍻 you'll have to reach out to me through Facebook messenger to me at our RN+DH page so I can get your info and mail ya one when he makes them! 🍻
That polaris rips!
Another great job Pete as always. ☃️👍👍
Thank you! Cheers!🍻
It's magnetized for the four-wheel drive needles needles as you calling ithem ..i would say their bearings like hehehe
lol yeah needles...bearings...needle bearings ya know what what I mean 🤪🤣🍻
Another Great Video Pete! They don't seem long when you keep the watchers attention. Thanks for another awesome video... Keep er Goin!!! Cheers! Received my RN=DH Cap as well, Thanks again for that!
that's awesome to hear! thanks for the support and wear the hat proud! 🍻
Love your videos man! Keep them coming 👍
that's awesome! thank you 🍻
My wife says you sound just like Tim Conway - that’s a compliment 😂.
lol yeah thats a pretty good compliment I'd say!! cheers 🍻
Stojko camera shy
haha he's a busy fella! 🍻
nice job!
Thank you! Cheers!🍻
Glad to see the views rising on ur channel Pete. We need some snow.
thank you! 🍻
Great video man your awesome
thank you! that's an awesome compliment and I really appreciate it!! cheers 🍻
As usual Pete, nice video! Both entertaining and educational. I too question the Polaris engineers.
cheers 🍻
GREAT job Pete. I got tired just watching! 😅
haha thanks! 🍻
Pete I got to know the part number for that bearing greaser tool you have…got to get me one!
oh jeez I don't remember the number lol, Stojko dropped the tool off with his RZR I don't actually own one lol but it is handier than a pocket on a shirt! 🤣🍻
Come on man . Fix the damn boat lol . Cheers brother
🤣🤣 no boats!! 🤪🍻
Nice vid.
thank you! 🍻
we like the long videos mang ! noice wonee ! catching myself saying ticity boo an awful lot lately eh lol
haha Nice One! nothin wrong with that!!! life is good when things are goin tickety-boo! 🤣🍻
Your videos Rock
thank you! I really appreciate that!!! cheers 🍻
Just wondering what the diameter of the inner bearing cage is . Maybe could use a piece of pvc drain pipe to make a sleeve with a wide enough gap to remove and install bearings without chasing parts in the process. Maybe make 2 rings/sleeves so 1 can be turned as to not affect the second row when working on the other.
yeah that's not a bad idea right there! cheers 🍻
What a job , I am not a fan of most engineers work , and this looks horrible . As always nice work Pete !😎👍🍺🇺🇸🇨🇦
Thanks 👍🍻
Nice work Pete! Lots of issues with Polaris! Not my first choice, just like you! Cheers!🙂
thank you! 🍻
I watch "Matt's Off Road Recovery" and he is mostly rescuing Polaris UTV's! @@rednecksdirtyhands
The KIOTI must have came from Wolf Run…LOL
lol yessir! cheers buddy 🍻 this winter is going to the Max....ULTIMAX that is!! 🤣🍻
Really enjoy your video! Would you be interested in testing our Polaris RZR XP 1000 accessories for a review video?
thank you! yeah I'd be interested. you can reach out to me through messenger on Facebook at RN+DH. cheers 🍻
Wonder if that grease zerk that is on that piece you took out before the winch ever gets any grease! Doesn't appear to be in a place to even get to.
yeah it's definitely not easy to get to!! 🍻
Use ship station
we'll have to look into it! 🍻
Were there any grease points on those loader pins?
ya know what??? come to think of it I don't think there was any! the pins were dryer than a popcorn fart when I took them out 🤣🍻
You know you got more work to do on that Polaris she's not dangling that front end off the ground lol
lol yessir! 🤣🍻
I am Sooo Glad I did not buy the Polaris.. Wolverine is 100% easier to work on even if it lacks the rip factor.
Good work. Still Prefer yamaha every day all day
thanks! 🍻