Hey Amber, It's interface has both RJ45 Network Port & The regular printer USB Port. If you can't connect to it via Network, Just connect it via USB and make sure you have the proper driver for your version of windows.
How do you take the printer light off. My print light is on. It’s on the top. I cannot use the copy or printer because it is on. Red light print Red and green light in the ‘print’ on the top.
That means your printer doesn't have an interface that allows it to be connected via a USB or Network cable, refer to your copier seller and ask them to install an interface for you or replace the whole machine.
If you don't have the interface setting there, maybe the machine is missing a part of the hardware interface itself or it doesn't have it at all and it does support photocopying only since the fax, print and scan are all an extra options. Try contacting the supplier to make sure it does have the full interface.
Thanks for the video. It helped me connecting the printer to the pc. I have a small problem now, it doesnt print any page. But everything worked until the last instrucțiuni....It says there is a Network problem with the printer:(
Hey Alexandra, you are welcome, and well, make sure you have assigned a static IP for the copier and if you are connecting it to an existing network or router, make sure the machine has an IP of the same family if the gateway is 192 168 1 1 then assign 192 168 1 40 and after installing the correct driver, it will work just fine, so review the video again and do the same steps and it should work just fine.
I think RICOH may have couple of apps for managing and using multi-function printers via networks and so on "RICOH Smart Device Connector" that might work just fine. Haven't really used it via the phone or tablet though. Give it a try & best of luck.
zk453, either with DHCP or manual IPs, you don't have to do any special configs to your router, just assign a static IP for the machine so that it doesn't change it's IP when you restart the router for example .. other than this, nothing else is needed.
Thank you for your reply i tried again and i printed the interface settings list and it shows that dhcp is off and then it shows the ipv4 11.22.33.44 and when i go to the settings it shows the ipv4 i had put and is programmed on specify maybe the printer has the problem. Thanks again for your time.
zk453, No worries, Always glad to help, Just try to assign an IP for your machine, at rare conditions the machine settings can't be modified due to an admin permission, other than this, you can easily assign an IP for your machine, go to the playlist "Multi-Function Copiers & Printers" which i made for all other multi-function copiers & i hope it may help. have a good day :)
Ahmed, you can do all the processes i did above, assign a static IP, connect it to the router, and that's it, you won't do the rest of the steps considering you don't have a computer .. :D !
Well, i never used such a kind of scanners, i only used it on mid to high volume machines where the scanner saves the files on the machines' HDD and then i access it through the web browser. i think i might have tried this once and scanned a file to a folder but it was a big hassle that it's way not convenient. never tried the twain driver though.
Hey Freeman, well, if you wanna share it with multiple devices, then you have to connect it to the WiFi router or modem & if you gonna use it only on 1 PC or laptop, then you can connect it directly via a USB cable or a LAN cable.
وعليكم السلام So glad it helped, and sure you can either connect it via a regular printer USB cable or using a network cable directly from your laptop to the machine's LAN. and i recommend the USB cable for a direct connection since you gonna need to assign a manual IPs for both the machine and the PC in case of a direct network connection.
Many Thanks, and well, this copier scans to a folder on the network or so, you have to assign a folder on a computer with a specific IP and choose the directory from the screen of the copier itself, All and all, i wouldn't recommend scanning using that model as i used to scan with touch screen multi-function RICOH copiers. I uploaded a video for it under the name: "How to Scan using Ricoh Copier". and if it's a less demand scanning jobs, then a regular HP or Canon scanner will do.
Hi I have a problem with my Ricoh 161 it tells me on the screen Dest.list update failed update in scanner features. Can anyone explain what I have to do? Thanks
Hey Robin, unfortunately, i 've never used that model for scanning as i used to have the much modern ones with touch screens that let you scan directly to the machine and then access it through the network and download the scanned filed which is way more convenient.
Well, I didn't need a cross cable since i was connecting the printer to my router which has a 4 X Full Duplex Ports, so no need for the cross cable unless you are connecting it directly to your laptop without a router or print server, while some laptop's cards are even full duplex which won't need a cross cable either :)
Hey there! Unfortunately, i'm no longer in the field, so i have no more access to multi-function copiers and printers. meanwhile, you can find a similar way of connecting your machine through the few videos i uploaded on that playlist: Multi-Function Copiers & Printers.
i have RICOH mp 171 and when i try follow this video i can see the site of configuration of my printer in 192.168.1.XX, but when i try send file to print he cant connect, anyone know why? :(
Hi Maria, seeing the machine through the web browser doesn't mean you have installed the printer correctly, and if you follow the steps of this video, i'm sure you would be able to install it on your computer, just make sure you assign a static IP and not via the DHCP which would later on get changed and you wouldn't be able to print on it, also check the interface and make sure it has a USB-B Port for the printers cable, if so, you can also use it for printing.
Hi Abtwahi, you need to contact the seller and ask them for admin code or pin in order to modify the copier settings. I had one with the same issue and the engineer came and entered the PIN or Rest the copier i can't remember.
jorre de backer, unfortunately no, as i never needed to upgrade the firmware of any of my multi-function copiers, yet you can still search for a video for such a thing.
I can see on my printer Ricoh MP 201 SPF there is that IPV4 address but when I go to "add printer" it doesn't detect this IPV4 address and when I typed it, it doesn;t work. Is there anything I can do???
Hey there, sometimes you can discover your printer through the regular add-printer wizard, so you would need to assign that manually, same as i did in that video, so you add an IP from the machine's panel, and you type that IP manually on the manual add-printer wizard and it will work.
Hello! Thanks for the video, it's excellent. I need to connect this printer with SMB to WIN 10. Do you know this? Or is it similar to what you plan.
which driver version you have install? PCL6 or PCL5e or any other?
Thanks
You are welcome. and the driver i usually use is PCL6.
that is my same question
واضح عربي😂😂
عراسي اخي👍👍
Is there anyway to connect this if my company does not have a network/server? Thank you!
Hey Amber, It's interface has both RJ45 Network Port & The regular printer USB Port. If you can't connect to it via Network, Just connect it via USB and make sure you have the proper driver for your version of windows.
How do you take the printer light off.
My print light is on. It’s on the top. I cannot use the copy or printer because it is on. Red light print
Red and green light in the ‘print’ on the top.
Thanks for this video, it helped quite a bit!
Luke, You are welcome, i'm glad it helped buddy :)
Hi, how to connect it to Windows 10 64bit, because there is no driver at Ricoh webpage?
Hi there, try using a similar driver from windows or so. any driver for a RICOH machine with the same speed or a close model.
Thank you so much .it work fine and the scanner also
You are welcome! So glad it helped.
Does it connect to Macbook at the same way?
Yea, give it a static IP and add a printer and make sure you download the proper driver for your Mac OS from RICOH website.
The place where you have inserted the cable is sealed on my printer..
That means your printer doesn't have an interface that allows it to be connected via a USB or Network cable, refer to your copier seller and ask them to install an interface for you or replace the whole machine.
the interface setting isn't found on the screen. How to show it?
If you don't have the interface setting there, maybe the machine is missing a part of the hardware interface itself or it doesn't have it at all and it does support photocopying only since the fax, print and scan are all an extra options. Try contacting the supplier to make sure it does have the full interface.
Thanks for the video. It helped me connecting the printer to the pc. I have a small problem now, it doesnt print any page. But everything worked until the last instrucțiuni....It says there is a Network problem with the printer:(
Hey Alexandra, you are welcome, and well, make sure you have assigned a static IP for the copier and if you are connecting it to an existing network or router, make sure the machine has an IP of the same family if the gateway is 192 168 1 1 then assign 192 168 1 40 and after installing the correct driver, it will work just fine, so review the video again and do the same steps and it should work just fine.
Does ricoh 201spf connect with the mobile plz reply
I think RICOH may have couple of apps for managing and using multi-function printers via networks and so on "RICOH Smart Device Connector" that might work just fine. Haven't really used it via the phone or tablet though. Give it a try & best of luck.
@@ModiAdams Does ricoh 201 connect with pc via cable??
I am not getting OEMSETUP on my laptop. Where do I go?
I have afico sg 3110 sfnw couldn't do it its frustrating. thx for the help even though it didn't work.
Do you need to have configured the router in any special way, or is the process fully automatic?
zk453, either with DHCP or manual IPs, you don't have to do any special configs to your router, just assign a static IP for the machine so that it doesn't change it's IP when you restart the router for example .. other than this, nothing else is needed.
Thank you for your reply i tried again and i printed the interface settings list and it shows that dhcp is off and then it shows the ipv4 11.22.33.44 and when i go to the settings it shows the ipv4 i had put and is programmed on specify maybe the printer has the problem. Thanks again for your time.
zk453, No worries, Always glad to help, Just try to assign an IP for your machine, at rare conditions the machine settings can't be modified due to an admin permission, other than this, you can easily assign an IP for your machine, go to the playlist "Multi-Function Copiers & Printers" which i made for all other multi-function copiers & i hope it may help. have a good day :)
Is there any way to connect Ricoh to network or router without using lap or computer as i don't have computer ?!
Ahmed, you can do all the processes i did above, assign a static IP, connect it to the router, and that's it, you won't do the rest of the steps considering you don't have a computer .. :D !
What about the scanner ? Will it work when i install twain driver after this method
Well, i never used such a kind of scanners, i only used it on mid to high volume machines where the scanner saves the files on the machines' HDD and then i access it through the web browser. i think i might have tried this once and scanned a file to a folder but it was a big hassle that it's way not convenient. never tried the twain driver though.
Oh, so the printer itself needs to be connected to modem, or otherwise it wouldn't work?
Hey Freeman, well, if you wanna share it with multiple devices, then you have to connect it to the WiFi router or modem & if you gonna use it only on 1 PC or laptop, then you can connect it directly via a USB cable or a LAN cable.
@@ModiAdams
Can you please explain how to connect the printer directly to a laptop by LAN cable
السلام عليكم
فيديو ممتاز
ممكن لو في طريقة لتوصيل البرنتر بجهاز الكمبيوتر على طول من غير ما أوصلها بالراوتر لو سمحت
وعليكم السلام So glad it helped, and sure you can either connect it via a regular printer USB cable or using a network cable directly from your laptop to the machine's LAN. and i recommend the USB cable for a direct connection since you gonna need to assign a manual IPs for both the machine and the PC in case of a direct network connection.
verry helpfull videos, and now how to install the scanner please ?
Many Thanks, and well, this copier scans to a folder on the network or so, you have to assign a folder on a computer with a specific IP and choose the directory from the screen of the copier itself, All and all, i wouldn't recommend scanning using that model as i used to scan with touch screen multi-function RICOH copiers. I uploaded a video for it under the name: "How to Scan using Ricoh Copier". and if it's a less demand scanning jobs, then a regular HP or Canon scanner will do.
hey please help i am unable to set infortec is2320 what shouuld i do
how do you install aficio 2020d printer to network
Hi I have a problem with my Ricoh 161 it tells me on the screen Dest.list update failed update in scanner features. Can anyone explain what I have to do? Thanks
Hey Robin, unfortunately, i 've never used that model for scanning as i used to have the much modern ones with touch screens that let you scan directly to the machine and then access it through the network and download the scanned filed which is way more convenient.
Modi Adams ok thanks. This video helped me set my printer up via my network but now have the issues above so printing trough the network won’t work.
Kindly send the driver link for ""Ricoh Aficio mp 2000 driver for windows xp""
You can easily google it and you will always find RICOH drivers the 1st results.
I think you can say that you must link the printer and the router with a cross cable
Well, I didn't need a cross cable since i was connecting the printer to my router which has a 4 X Full Duplex Ports, so no need for the cross cable unless you are connecting it directly to your laptop without a router or print server, while some laptop's cards are even full duplex which won't need a cross cable either :)
shure. depends of hardware.
How to connect a Ricoh Aficio MO C4000 via network? Thank you
Hey there! Unfortunately, i'm no longer in the field, so i have no more access to multi-function copiers and printers. meanwhile, you can find a similar way of connecting your machine through the few videos i uploaded on that playlist: Multi-Function Copiers & Printers.
Ricoh mp201 scanner settup please
where could i find the driver to aficio171 MP?
Oliver, Just google: Aficio MP171 Driver for windows 7, 8, or 10 and you will find it on the 1st result.
i have RICOH mp 171 and when i try follow this video i can see the site of configuration of my printer in 192.168.1.XX, but when i try send file to print he cant connect, anyone know why? :(
Hi Maria, seeing the machine through the web browser doesn't mean you have installed the printer correctly, and if you follow the steps of this video, i'm sure you would be able to install it on your computer, just make sure you assign a static IP and not via the DHCP which would later on get changed and you wouldn't be able to print on it, also check the interface and make sure it has a USB-B Port for the printers cable, if so, you can also use it for printing.
شكرا يا محترم
it doesn't work for me
please help me Ricoh aficio MP 161 LN
When i click on specify
Previllage are required error
Hi Abtwahi, you need to contact the seller and ask them for admin code or pin in order to modify the copier settings. I had one with the same issue and the engineer came and entered the PIN or Rest the copier i can't remember.
thanks a million..
Fanciecom, You are always welcome :)
Do you have a firmware for this printer?
jorre de backer, unfortunately no, as i never needed to upgrade the firmware of any of my multi-function copiers, yet you can still search for a video for such a thing.
thank you so much
thank you
Thanks
bhai pepar par one said print nai ata
Useless
Wireless
Dumb music
I can see on my printer Ricoh MP 201 SPF there is that IPV4 address but when I go to "add printer" it doesn't detect this IPV4 address and when I typed it, it doesn;t work. Is there anything I can do???
Hey there, sometimes you can discover your printer through the regular add-printer wizard, so you would need to assign that manually, same as i did in that video, so you add an IP from the machine's panel, and you type that IP manually on the manual add-printer wizard and it will work.