Quadratec Powered Automatic Mirror Movers for 2011-2018 Jeep Wrangler JK

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ม.ค. 2025

ความคิดเห็น •

  • @marcov7856
    @marcov7856 4 ปีที่แล้ว +1

    Just installed this. Adds a really nice touch of black to the car. And the look of the stock mirror with the functionality intact is just superb. Easy to install and the whole assembly is well made. Can’t wait to take my doors off now. Will have to test for sound and shake though on the highway

  • @MaloyRob
    @MaloyRob 4 ปีที่แล้ว +1

    Great video. Took less than 3 hours for an old fat guy to do. Good instructions, it went together just like you said it would. The only change I would suggest it mentioning that the long tube on the face plate should be down when it goes on the door.

  • @RustyWynne
    @RustyWynne 3 ปีที่แล้ว +1

    I just added these to a 2014 jku. Video was spot-on. Thank you!

  • @dontmesswithtexas77
    @dontmesswithtexas77 5 ปีที่แล้ว +10

    the question is: Why isn´t this the stock version?? Why put mirrors in the doors if you are not able to remove it without all this work?

  • @alphaviet6428
    @alphaviet6428 5 ปีที่แล้ว +1

    Simply brilliant idea. Just got installed this on my Jeep.

  • @stitch1007
    @stitch1007 6 ปีที่แล้ว +1

    Looks good. Might have to add these this summer.

  • @TamJ320
    @TamJ320 5 ปีที่แล้ว +6

    Will these be available for the 2019 JL Unlimited?

  • @taraaaron1242
    @taraaaron1242 2 ปีที่แล้ว +1

    Is there something like this for the tj

  • @HapPap81
    @HapPap81 4 หลายเดือนก่อน

    I have the power mirror option, but I wanna use the manual version of these. Can I just order the 07-18 JKU manual ones and use them?

  • @thomasrossi31
    @thomasrossi31 6 ปีที่แล้ว +2

    How is the vibration of these mirrors?

  • @imqwackers4jeeps
    @imqwackers4jeeps 2 ปีที่แล้ว

    I just installed the drivers side. The only issue I ran into was the filler plate didn’t like the 40mm bolts. Any suggestions?

  • @eric_r_colby
    @eric_r_colby 2 ปีที่แล้ว

    When does the JL/JT version come out?!

  • @charleslewis7092
    @charleslewis7092 5 ปีที่แล้ว

    Great video easy to install!

  • @raybravo9581
    @raybravo9581 3 ปีที่แล้ว

    Any news or predictions for the JL?

  • @richfrederick2701
    @richfrederick2701 12 วันที่ผ่านมา

    Junk! After a few years the joints which must swivel each time the doors open wear out and the wires constantly twist inside the swivel as well, my wires we’re all ripped apart and the mirrors were sagging because the swivel joint fails after so many turns.

  • @DigitalSynergyLLC
    @DigitalSynergyLLC 4 ปีที่แล้ว

    Will these work on the new Gladiator??

  • @mlbroncos07
    @mlbroncos07 2 ปีที่แล้ว

    Cannot route new wire harness from outside under body into engine block on 18 JK Rubi Recon. Suggestions w/o splicing?

    • @mlbroncos07
      @mlbroncos07 2 ปีที่แล้ว

      Nvm. W help of a pry bar it went.

  • @markrogers6681
    @markrogers6681 6 ปีที่แล้ว

    I have a KC windshield mount lightbar, will these still work? Thanks

  • @SnakeDoctor303
    @SnakeDoctor303 5 ปีที่แล้ว +1

    How the hell did u run the new wire through the door to the hole on the inside???

    • @yassirserpa
      @yassirserpa 5 ปีที่แล้ว +2

      Not necessary for these mirrors however I had the same problem installing a regular mirror. I used a wire hanger to claw back on the inside. For everyone out there make sure to tie a string or something to the old cable before pulling and save some time By the way awesome video.

  • @johnhouston3255
    @johnhouston3255 ปีที่แล้ว

    got these since the laws in pa are finally going to change so DOORS OFF ALL THE TIME NOW

  • @TonyWMartino
    @TonyWMartino 4 ปีที่แล้ว +1

    Has anyone else had problems with the mirror hitting the door? My passenger side the door hits the mirror instead of the stopper..

    • @michaelcampbell1918
      @michaelcampbell1918 4 ปีที่แล้ว

      I’m having the same issue now. I’ve torn the mirror down as far as I could and can’t find anyway to adjust it. If I could tweak the hinge about 1/4 inch clockwise it would fix the issue but I haven’t found any videos on how to get inside of the actual mirror.

    • @TonyWMartino
      @TonyWMartino 4 ปีที่แล้ว +1

      Michael Campbell so what I realized is that the mirror had play vertically ie it would move up and down instead of being sturdy. I took one piece off and tightened it and that fixed it. I’d suggest comparing your good mirror against your bad one and then tighten the piece from factory that was more or less tight (since they come preassembled)

    • @joshberry4301
      @joshberry4301 3 ปีที่แล้ว

      I was able to loosen the two torx bolts a little, and lift the mirror a bit while tightening them back down, and that fixed it for me.

  • @martinrivas5388
    @martinrivas5388 6 ปีที่แล้ว

    Can they be installed on a 2011 wrangler that didn't come whit power mirrors

    • @Quadratec
      @Quadratec  6 ปีที่แล้ว

      We have these for manual mirrors as well. www.quadratec.com/products/13125_0220_07.htm

  • @Bignene628
    @Bignene628 6 ปีที่แล้ว

    I don’t see this on your website any item number I can put in

    • @Quadratec
      @Quadratec  6 ปีที่แล้ว

      What year Jeep do you have? We do have a link in the description: www.quadratec.com/p/quadratec/automatic-billet-aluminum-mirror-movers-11-17-jeep-wrangler-jk-power-heated-mirrors?Quad-Power-Mirror-Movers

  • @gd7062
    @gd7062 3 ปีที่แล้ว

    Why would Jeep never figured to do this in first place?

  • @phillipcraggs6202
    @phillipcraggs6202 6 ปีที่แล้ว +3

    JL?!?!?!?!?!?!?!?!?!?!? Please tell me these are coming for the JL.

    • @johnhickman1597
      @johnhickman1597 6 ปีที่แล้ว +4

      They moved to power mirror switch to the drivers door on the JL so you wouldn't be able to control them with the doors off like on the JK. That being said I still hope they come on the JL . I don't know why Jeep doesn't do this from the factory.

  • @IFHSP2
    @IFHSP2 6 ปีที่แล้ว +5

    Carpet...who has carpet...lol

  • @tobynoe6149
    @tobynoe6149 2 ปีที่แล้ว

    Nice, but they cost $420. Hard to believe but all Jeep owners aren’t millionaires. Make a kit with just the brackets for us commoners. Thanks.