BMW R1250 GS - How to enable Dynamic Pro and Enduro Pro riding modes
ฝัง
- เผยแพร่เมื่อ 4 เม.ย. 2021
- This short video demonstrates how you can enabled pro riding modes such as Enduro Pro and Dynamic Pro on your regular GS.
Subscribe, Like, Comment and Share
#bmwr1250gs #promodes #ridingmodes
Thank you bro
For 2021 it's already loaded, there is no plug. You can access it via the TFT from day 1 and select what you want. Just an FYI.
thanks , u answering the question i ask my self
I just picked up a 2022 and they told me they have to unlock the modes at the first service? I haven’t had anyone work on my bikes in over 20 years, and I don’t like being forced to go back to the dealer for something I can easily do myself. Looking to find a way around this.
@@walter6990 I would go into your TFT and see, should be available right away. You just have to deselect one mode to add another, only 4 allowed active at once I believe.
I have BMW R1250 Gs year 2021 and don’t have the Dynamic pro active how can active this mode.?? Thanks
@@MotoBeemer just wanted to follow up and say thanks. Once I took a minute to go through the computer I found it 👍
The Pro settings is an acronym for Programmable.
It's an abbreviation, not an acronym
Will this work on the 2021 R1250RT
After activating dynmic pro can u just unplug that red thing?and dynmic pro mode will remain?
There's any way to enable riding modes in a R1250GS Sport? The Sport model only have street and rain mode
you have r1250 gs then, you should have plug under the seat all needs is just installation.
I have plug in but only see enduro pro there is no dynamic pro??
same for my 2016R1200 GS LC, Enduro Pro but jut Dynamic with the plug in symbol.
Where do I buy the plug? And whats in it?
You can get plug ordered through your local dealership it is anywhere between 25 - 60 dollars depends where you can find good one on sale online like calimoto.com all plug does is short the two wires..I have even seen post you can do same paperclip. Hope this helps!
@@rocksnroadsadventure4247 thnx for ur answer. But Calimoto is a navi app I am using when I ride.
My plug will not click into place. Suggestions?
Did you removed the cover and make sure insert pin lineup correctly
The plug is not a chip. It is just a jumper wire that completes a circuit. You can just use a wire to do the same thing. No need to buy the plug.
do u have a link for that video?
@@otoymoreno299 just search for it. If you are wanting to do it then just get a thin insulated wire and put one end in one hole and the other end in the other hole. Very simple. I would shut the bike down first or follow the procedure to install the BMW plug. I did mine no problem.
are you sure that´s a just simple jumper? Have you tested it? Do you know if it´s the same for a F900R 2020? Thanks!
@@mobil04 I did it on my r1200gsa.. I don't know about the 900. Check some forums. Probably the same. All the software is built in. Just complete the circuit.
@@cdrseabee thankx a lot dude.. will do that! cheers
Not a clue