Thanks for the video, you really helped me...I did buy 2 of the sensors one from the back of the engine, the other is in front, they come in a set and sells on Ebay for 20$ for both, in store it would cost 75$ for the back and 45$ for the front...The back camshaft sensor can be replace easily too, the front you have to jack the car up and craw underneath. I did replaced both and i am not an expert...save time and money. Now the car runs perfect. So when you have check engine, VCD, Slip lights are On and the engine runs sluggish its the camshaft sensors.
Mr.Rivera and Sis as you can see I asked you 4 months ago well now im getting code p0335 crankshaft but I changed it 4 months ago do you think it went bad again ?
My Murano 2003 doesn’t start it just makes a click sound I have checked the battery it’s good and recently my service engine light was flashing I drove the car back home after driving 20 miles and then after I parked it for few hours the car would not start but only click , would you be able to tell what problem could that be if not battery
sounds like the alternator honestly but I would double check with your mechanic. I had to replace mine about a year ago and it made that same clicking sound you are describing.
So that code hasn't popped up on me so not sure about that one I know it's some kind of misfire but that one I would talk to your mechanic about but if it is the alternator from personal experience any time I here that clicking sound I awesome it's the alternator until told other wise it's happened to me on another car of mine also. I hate that clicking.
Mr.Rivera and Sis thanks a lot for taking out time and replying I asked someone else too and they are suspecting engine seize and that’s something I am afraid of , I will keep you posted on what I find out
Buenas tardes grupo, quisiera saber si alguien me puede ayudar con un problema que tengo con mi nissan murano 2004, pasa que la camioneta es un poco dura para prender y al momento que esta encendida pierde un poco de fuerza y se apaga y debido a eso se le encendió el testigo del motor le cambie el censores del árbol de levas y sigue igual, será que alguno de ustedes me podría ayudar, para entender que es lo que le pasa por que al momento de escanear la camioneta nuevamente dice que es el censor del árbol de levas y cigüeñal.... agradezco su tiempo 🙏
I pretty much did same, felt around for the spot where it was supposed to be and just did it. Nothing to it really, taking off the splash guard would have taken to long and it was the beginning of December so it was freezing.
Yes randomly, with no warning, during rush hour, luckily I put the car in park tried to turn it on as quickly as possible which luck was on my side and stopped at autozone.
I bought mine at 122,000 miles and its still running strong, I like sport mode and it hits 100 easy. One thing you will always need though is some oil in the trunk the Murano burns oil I have noticed.
I live in city so oil shouldn’t be a problem as a gas station is just infront of my home. Only thing that worried me is the stalling. One I’m going for is AWD Automatic transmission.
can someone help me i have a 07 nissan murano the battery good and the alternator ok but im getting no power on my dash borad only to lights a red light blinking with a car with a key in it my horn wont blow but when i press the alarm my hazard lights blinks onthe inside not the horn blowing its just dead to the world it wont say nothing please help sos dam
Mr.Rivera and Sis did the check engine light go away soon as you changed it ? Did mines again earlier but check engine light still on with the same code
Mine did but when you disconnect the battery it basically resets everything. Then after that you have to drive the car for more than 50 miles if it stays off then you are good to go. If it pops up again then you may need to consult a mechanic.
Mr.Rivera and Sis I changed it twice its the 1 and only code I pulled the battery for 3-4 hours I had my boy reset it with the reader thing pops right back up the way I got rid of the code was turning the key to on waiting 3 sec then pumping the gas pedal 5 x's waiting 7 seconds then holding the gas pedal for 10 sec's the light started blinking and they to turn it off then start it I did the opposite I tuned it right on the light turned off .. I can't afford a mechanic they love to over charge for something simple
Thanks for the video, you really helped me...I did buy 2 of the sensors one from the back of the engine, the other is in front, they come in a set and sells on Ebay for 20$ for both, in store it would cost 75$ for the back and 45$ for the front...The back camshaft sensor can be replace easily too, the front you have to jack the car up and craw underneath. I did replaced both and i am not an expert...save time and money. Now the car runs perfect.
So when you have check engine, VCD, Slip lights are On and the engine runs sluggish its the camshaft sensors.
I am glad my video was able to help you. I want to make more videos on the Nissan Murano or something else interesting. Not sure if I should though.
JEFF VU Thanks for the heads up Jeff
Mr.Rivera and Sis Helped alot of people. Thanks!
Where exactly did yiu get the parts online?
@@1stmillionaireinmyfamily331 As i said, you can buy the sensors on Ebay and Amazon...
Thanks for the help! It took me 5 minutes to do this.
no problem, glad the vid helped
takes my husband five minutes to finish too
@@treehouse897 oh yeah? It took my husband 4 mins
Thank you for the video, great help. My ign / eccs fuse kept blowing
glad to hear it, I'm surprised this video keeps getting views. Happy it helped you.
cool video dude. im really impressed!
thanks bro Im about to do one about my shoes
This is the video we all needed.
NOTE:my Murano 2004 I change de geiges dash for a 2007 same conection easy to fix
Can this help the starter to Disengage quad cranking
Bet. Thanks bro
I just ordered mines you went from underneath ?
Yes I think thats the easiest way to do it.
Mr.Rivera and Sis as you can see I asked you 4 months ago well now im getting code p0335 crankshaft but I changed it 4 months ago do you think it went bad again ?
yes like i do with my wife
how much the sensor?
I paid about 40$
Thanks you! Great video!
okay guy I will try to do it my self . . I want to do both units . . . where is the 2nd unit ? ? ? ?
Did u jack up the car when u got underneath it? Im going to replace mine. Scared to used my jack. Not trying to get pinned under my car.lol
I didn’t have to I was able to just feel around and find it.
What your car hesitating here and there As well?
Yeah man especially on the highway
My Murano 2003 doesn’t start it just makes a click sound I have checked the battery it’s good and recently my service engine light was flashing I drove the car back home after driving 20 miles and then after I parked it for few hours the car would not start but only click , would you be able to tell what problem could that be if not battery
sounds like the alternator honestly but I would double check with your mechanic. I had to replace mine about a year ago and it made that same clicking sound you are describing.
Mr.Rivera and Sis could it just be a starter ? Or could there be an issue with my engine since I also have a code p0300
And thanks a lot for replying
So that code hasn't popped up on me so not sure about that one I know it's some kind of misfire but that one I would talk to your mechanic about but if it is the alternator from personal experience any time I here that clicking sound I awesome it's the alternator until told other wise it's happened to me on another car of mine also. I hate that clicking.
Mr.Rivera and Sis thanks a lot for taking out time and replying I asked someone else too and they are suspecting engine seize and that’s something I am afraid of , I will keep you posted on what I find out
How many crankshaft sensor for nissan murano 2003?
Buenas tardes grupo, quisiera saber si alguien me puede ayudar con un problema que tengo con mi nissan murano 2004, pasa que la camioneta es un poco dura para prender y al momento que esta encendida pierde un poco de fuerza y se apaga y debido a eso se le encendió el testigo del motor le cambie el censores del árbol de levas y sigue igual, será que alguno de ustedes me podría ayudar, para entender que es lo que le pasa por que al momento de escanear la camioneta nuevamente dice que es el censor del árbol de levas y cigüeñal.... agradezco su tiempo 🙏
La recomendacion son partes de la nissan no pongas partes de autozone
What side you go under and dont show a side
Did you end up taking off the splash shield ?
I just did it in the dark with a flash light. I didn't jack up the car or take off the splash shield.
I pretty much did same, felt around for the spot where it was supposed to be and just did it. Nothing to it really, taking off the splash guard would have taken to long and it was the beginning of December so it was freezing.
So did this fix the problem with your car randomly shutting down?
yes it did hasn't shutdown on me since.
merci
How do i reach it it seems that there is a mount in my way. No room to pull it. Can this be done without a jack
The day that I did it, it was without a jack downside was I was not able to really see I just felt around the area and found what I was looking for.
It stalled all of a sudden on the road?
Yes randomly, with no warning, during rush hour, luckily I put the car in park tried to turn it on as quickly as possible which luck was on my side and stopped at autozone.
I’m planning on buying the same model with 99k miles on it, looks well and feels very powerful to drive. Would you recommend?
I bought mine at 122,000 miles and its still running strong, I like sport mode and it hits 100 easy. One thing you will always need though is some oil in the trunk the Murano burns oil I have noticed.
I live in city so oil shouldn’t be a problem as a gas station is just infront of my home. Only thing that worried me is the stalling. One I’m going for is AWD Automatic transmission.
I have the same 2005 Nissan Murano SL AWD love it during winter time.
can someone help me i have a 07 nissan murano the battery good and the alternator ok but im getting no power on my dash borad only to lights a red light blinking with a car with a key in it my horn wont blow but when i press the alarm my hazard lights blinks onthe inside not the horn blowing its just dead to the world it wont say nothing please help sos dam
That means somebody tried to go in your care and steal it the car is now blocked for proteccion! you need to contact a nissan dealer to get it fixed
*car
What code did you get im getting code p0335
I got the same code when that sensor was faulty.
Mr.Rivera and Sis did the check engine light go away soon as you changed it ? Did mines again earlier but check engine light still on with the same code
Mine did but when you disconnect the battery it basically resets everything. Then after that you have to drive the car for more than 50 miles if it stays off then you are good to go. If it pops up again then you may need to consult a mechanic.
Mr.Rivera and Sis I changed it twice its the 1 and only code I pulled the battery for 3-4 hours I had my boy reset it with the reader thing pops right back up the way I got rid of the code was turning the key to on waiting 3 sec then pumping the gas pedal 5 x's waiting 7 seconds then holding the gas pedal for 10 sec's the light started blinking and they to turn it off then start it I did the opposite I tuned it right on the light turned off .. I can't afford a mechanic they love to over charge for something simple
Yeah I know what you mean on the mechanic, I always try to DIY first to save some money where I can. Sorry the video wasn't more help to you.
Having trouble find it, anyone know where i could find it
Mike Rodriguez its in the middle of the front of the engine if that makes any sense
Part nomber Nisan Murano v6
i want that service manual
William Guzman For Nissan Murano..look on Ebay.
P0330 code is the code of hell
I hope you reprogrammed the computer
Teacher Preacher. How do I reprogram computer I replaced my crankshaft sensor now my 06 Murano jerks while I'm accelerating
Deshawn Jelks did it work Deshawn i want to know before i replace mine.
Tomara Thompson yes it works you'll have to buy it from the dealer I paid 150 for it good luck
Deshawn Jelks .. Ok Thanks.
fuck you