Great job Gene. You always manage to squeeze a lot of useful information into a relatively small time slot. Love your videos. I can’t wait until you can test some of these products.
I hava a modest 5.2 setup that just last week I went from a Marantz 7012 to the Arcam AVR10. The sound is phenominal, my B&W 702S2 towers sound great. Also noticed while watching movies that channel separation was more noticeble with the AVR10. I have rear B&W 706S2 and they were sounding cleaner with nice tight bass. My dual pb16 ultras sounded alot better as well. All with factory settings, cant wait to hear it once its all dialed in. Gene as always great job bringing top notch content!
Armando Garcia how you doing i have Bowers Wilkinson 703s2 5.1 setup. And looking for a upgrade from my pioneer elite receiver. And this model was one of them how is it on reliability.
Gene, The one thing I must say is I'm disappointed in the lack of easy multiple subwoofer configuration. I heard with the presenter said about the upgrade availability to the full Dirac app but not that the products would be able to be configured for multiple subs. We all know there are only so many connections on the rear and signal channels buit into the AV. It's time these manufacturers start to recognize that most people doing HT today are using more than one sub, even the 2 channel guys are going that way. It's the only way to get smooth bass response in just about any room. Thanks for your hard work, Sal1950
Sal, the Arcam processors do allow multi-sub hookups with independent delay and trim levels. I will try to confirm how many are able to connect but the AudioControl versions can hook up at least 2 subs as far as I know.
Albert Huron and as you might have figured out that carries over to other models as well. “On the AVR20, AVR30 & AV40 there are potentially up to 4 discrete subwoofer outputs.”
I have owned 2014 Arcam 380 but need to upgrade because I want to purchase 4K tv. I am a 5.1 system and that is sufficient for the room.I’m also driving a Bryson 4cubed amplifier. What is the best next upgrade and value upgrade to improve this situation.
Hey Audioholics, hope you are doing well. If upgrading from Marantz SR8012 AVR to Separate AV Processor and Power Amp - any recommendation between Audiocontrol vs Arcam vs Others?
Thank you Gene for your videos. I'm thinking of doing 3.1 surround what would you think is the best sound system to go with that baby use down the road dual amplifiers my room will be in the basement rectangle shape any ideas on a good amplifier in between $500 and $1,000 that doesn't have all the bells and whistles like Bluetooth
@@Audioholics just some feedback, I like premieres when you are doing an hour+ live discussion. But they seem unnecessary for shorter and prerecord videos that aren't under NDA.
Thanks Gene...Great.. Unfortunatrly for the Dirac set up my PC is far off to the listening area + to the Dirac device .. You mentioned the mic must be connected to the PC.. I would so need a USB active extender cable connecting the PC to the Mic for measurement in the listening area. Don't think this works for distances up to 45 feet?
Not a single balanced pre out on those multi thousand "hi end" products? Especially sad the processor lacks them, most competitors seems to have at least for the front channels.. Running 15m to the front, parallell to some surround cables and projector mains makes this a must (single cable channel to keep wife. Period). Monoprice HPT-1, Outlaw 976 or the Anthem one seems to fit my context better..
they just can’t be charging the consumer nearly 5k for 16 channel AURA 3D ACCESS. When we can get 11 to 16 channel aura 3D and other codecs at $1500 or less, the markets will explode.
You can talk about how good a 2.1 system is all you want but you can not compare that to a surround system with dolby atmos. You can't get that with 2 channel setup's. Even a cheap surround system sounds decent, not so with 2.1.
Yes thats for the SA-20. I currwntly own it and love it. Dont let the size fool you. This things weighs alot. I thought it was stuck to the table when I tried to pick it up. Sounds great. Cant imagine anything souding better for the money or even more in some cases.
Great job Gene. You always manage to squeeze a lot of useful information into a relatively small time slot. Love your videos. I can’t wait until you can test some of these products.
They’ve really set the bar here. I don’t know of any other AVR line that can touch this for the price.
I hava a modest 5.2 setup that just last week I went from a Marantz 7012 to the Arcam AVR10. The sound is phenominal, my B&W 702S2 towers sound great. Also noticed while watching movies that channel separation was more noticeble with the AVR10. I have rear B&W 706S2 and they were sounding cleaner with nice tight bass. My dual pb16 ultras sounded alot better as well. All with factory settings, cant wait to hear it once its all dialed in.
Gene as always great job bringing top notch content!
Armando Garcia how you doing i have Bowers Wilkinson 703s2 5.1 setup. And looking for a upgrade from my pioneer elite receiver. And this model was one of them how is it on reliability.
This sounds good. I'm running 7 series B&W's on an SR8015. Very happy with the sound. But who doesn't want to improve it ?
Gene, great interview on the Arcam equiptment.
I have the Arcam SA-20 and love it👍😎
Gene, The one thing I must say is I'm disappointed in the lack of easy multiple subwoofer configuration. I heard with the presenter said about the upgrade availability to the full Dirac app but not that the products would be able to be configured for multiple subs. We all know there are only so many connections on the rear and signal channels buit into the AV. It's time these manufacturers start to recognize that most people doing HT today are using more than one sub, even the 2 channel guys are going that way. It's the only way to get smooth bass response in just about any room.
Thanks for your hard work,
Sal1950
Agreed here... I wasn't sure it was possible but would have liked the option to try
Sal, the Arcam processors do allow multi-sub hookups with independent delay and trim levels. I will try to confirm how many are able to connect but the AudioControl versions can hook up at least 2 subs as far as I know.
I asked Arcam and they said that the AV40 would support up to four discrete subs.
@@philipbtz that's awesome!
Albert Huron and as you might have figured out that carries over to other models as well.
“On the AVR20, AVR30 & AV40 there are potentially up to 4 discrete subwoofer outputs.”
So what's the difference between an AVR30 and an AVR850 other than their looks?
I have owned 2014 Arcam 380 but need to upgrade because I want to purchase 4K tv. I am a 5.1 system and that is sufficient for the room.I’m also driving a Bryson 4cubed amplifier. What is the best next upgrade and value upgrade to improve this situation.
Gene, did they say how many sub outputs the new AV stuff will have??
Hey Audioholics, hope you are doing well.
If upgrading from Marantz SR8012 AVR to Separate AV Processor and Power Amp - any recommendation between Audiocontrol vs Arcam vs Others?
Looks like some very nice new products from Arcam.
Thank you Gene for your videos. I'm thinking of doing 3.1 surround what would you think is the best sound system to go with that baby use down the road dual amplifiers my room will be in the basement rectangle shape any ideas on a good amplifier in between $500 and $1,000 that doesn't have all the bells and whistles like Bluetooth
The volume knob is on the left side. It must be on the rear panel, will be more useful.
Is this getting auro 3d? The others (audiocontrol and jbl) have it, but I didn't see any media coverage clearly stating that arcam would have it.
you will find out when the video premieres tomorrow :)
@@Audioholics just some feedback, I like premieres when you are doing an hour+ live discussion. But they seem unnecessary for shorter and prerecord videos that aren't under NDA.
Hi ,has the arcam av40 had all the issues sorted , as I’ve seen over videos about this processor ,and it seems to have a few bugs
Thanks Gene...Great.. Unfortunatrly for the Dirac set up my PC is far off to the listening area + to the Dirac device .. You mentioned the mic must be connected to the PC.. I would so need a USB active extender cable connecting the PC to the Mic for measurement in the listening area. Don't think this works for distances up to 45 feet?
Use a laptop
Don't have a laptop.. Only from work where its banned to download private software..
Not a single balanced pre out on those multi thousand "hi end" products? Especially sad the processor lacks them, most competitors seems to have at least for the front channels.. Running 15m to the front, parallell to some surround cables and projector mains makes this a must (single cable channel to keep wife. Period). Monoprice HPT-1, Outlaw 976 or the Anthem one seems to fit my context better..
All of these processors in this video have XLR outputs for ALL channels. Only the receivers have unbalanced outs like more receivers do.
Will it still sound as good bridged? In the market currently for some 1kW Monoblocks.
no hdmi 2.1
How many subwoofer outputs do they have?
they just can’t be charging the consumer nearly 5k for 16 channel AURA 3D ACCESS. When we can get 11 to 16 channel aura 3D and other codecs at $1500 or less, the markets will explode.
They have pretty good reviews though and comes with Dirac Live...wd like to try them out
How good are the other $1500 systems per channel. More channels does not mean better especially in a dedicated system.
Does the SA20 have Dirac?
I have an SA-20 and it doesn't
They look a lot like the Monoprice processor almost identical look
Great job plenty of info 👍
Imax enhanced capability?
Is a video of the nad t778 also coming gene?
Didn't have time to cover NAD.
Seems to be very Impressive 👌👍
Gene lotta claims made, time to test the AVR’s.
agreed
Damn. I see this man's lips move, but all I hear is jibba jabba.
jibba jibba indeed. real bad.
@@barrybrennan2135
It is not your fault you could not understand.
You can talk about how good a 2.1 system is all you want but you can not compare that to a surround system with dolby atmos. You can't get that with 2 channel setup's. Even a cheap surround system sounds decent, not so with 2.1.
Wow! $1,500.00 for an Arcam!
Yes thats for the SA-20. I currwntly own it and love it. Dont let the size fool you. This things weighs alot. I thought it was stuck to the table when I tried to pick it up. Sounds great. Cant imagine anything souding better for the money or even more in some cases.
@@edwinsprojects7039 Arcam makes good stuff. I have an AVR300 from 2006 and it’s a powerhouse.
Good bye emotive pre amps.. I still like their amps buuuuut at no chance that they will survive these 3 16 channels pre amps coming out soon
@told smith not sure at the moment. I'll wait a few months after its out to decide.. lets see what bugs come up
@@12schnsaint yes, the bugs war... no one is bug free
@@alessioscoda5839 true that! Haha which is gonna have least bugs. We shall see who will win. In the end its whatever someone finds they like better
pitty that they are so full of bugs that they are not usable. if the receiver was a animal it was so sick it would be put down.
Don’t believe the hype.
Just buy an audio mixer, powered speaker and powered sub and you will never look at this system again🤣