@@j.a.s.o.n_h.e.s.s velocity Walker Evans. Would be also great if you made the videos of maintenance so that there would be all the steps. Its frustrating to watch when you cut some parts out in one video of maintenance on some shock. i dont remember what video that was tough.
I have a 2022 sportsman xp 1000s, doesn't have walker evan shocks. I'm running 30s and finding current suspension inadequate.. what can i do to fix this problem?
I broke the lower shock bolt retainer on the end of the shaft where it bolts to my RR trailing arm. When my Super ATV Boxed Radius rods failed and lower hub let loose twisting my Trailing arm and snapping my shock bolt tab. Can you buy just that bolt tab and is it Threaded on the end of the shock Ram? They are Walker Evan Shocks on a 2018 RZR XP 4 Turbo.
Jason, My 2015 polaris pro-s has what I would call a hitch in one of the front shocks. It gets about half compressed and appears to hang up a bit, then more weight gets it past that point. Seems ok on either end of the hitch. Have you seen this kind of issue before? Thanks in advance.
Have you checked the gas pressure lately ? If it gets to low the oil can get trapped on the wrong side of the floating piston and have this effect. The other thing that comes to mind is a bent shaft. I’ll be sure to bring this up in my next video. Thanks for your comment 👍🏼
Maybe make a maintenance video for these? Looking for that i ran into this video
Thanks for the comment! I definitely plan on doing a service video in the near future.. What shocks do you have?
@@j.a.s.o.n_h.e.s.s velocity Walker Evans. Would be also great if you made the videos of maintenance so that there would be all the steps. Its frustrating to watch when you cut some parts out in one video of maintenance on some shock. i dont remember what video that was tough.
@@jokuko2 I'll definitely make this video.
Can the reservoir be rotate a bit on the shock body or is it fixed?
I have a 2022 sportsman xp 1000s, doesn't have walker evan shocks. I'm running 30s and finding current suspension inadequate.. what can i do to fix this problem?
I broke the lower shock bolt retainer on the end of the shaft where it bolts to my RR trailing arm. When my Super ATV Boxed Radius rods failed and lower hub let loose twisting my Trailing arm and snapping my shock bolt tab. Can you buy just that bolt tab and is it Threaded on the end of the shock Ram? They are Walker Evan Shocks on a 2018 RZR XP 4 Turbo.
i got a 21’ velocity 4 seater hate how the whoops felt i. the dunes i have shock therapy springs should i go with king shocks n build those
Doesn’t matter what set you go with they’re both gonna need to be tuned as far as King goes it’s in better quality product.
What change would it make running a 7.5w or 5w vs the spec of 10w in Walker Evans shocks?
Great video
Thanks Joe!
How do they compare to eibeck
Eibach is a good brand... I've been tuning suspension for 25 years and have experience with both. Swift Springs is hands down my favorite.
Do the velocity shocks still run 7/16 ID valve shims? I haven't been inside these but i remember the XP 1000 ran them.
Oh man good question I can’t remember 🤦🏻♂️
Jason, My 2015 polaris pro-s has what I would call a hitch in one of the front shocks. It gets about half compressed and appears to hang up a bit, then more weight gets it past that point. Seems ok on either end of the hitch. Have you seen this kind of issue before? Thanks in advance.
Have you checked the gas pressure lately ? If it gets to low the oil can get trapped on the wrong side of the floating piston and have this effect. The other thing that comes to mind is a bent shaft. I’ll be sure to bring this up in my next video. Thanks for your comment 👍🏼
Jason, I had a question on the v3.0s could you run a v2.5 adjuster in place of the high speed V3 and make them a v 3.5 to get low and high speed?
Because it can't be just the valve right?
Hi Damien, I'm not sure I understand... Would you be open to discuss over IG Live?
Has anyone ran these on yxz
Hi Dan, the only person off the top of my head running them on a YXZ was @jerry_fast on instagram check him out..
@@j.a.s.o.n_h.e.s.s yeah I've been wanting to know I just don't think the Springs and revolving of the stock shocks gets it good enough
Dan would you like to discuss over the phone? I’ve got time tomorrow..
@@j.a.s.o.n_h.e.s.s sure my email is danpmatz@gmail.com
If you want to email me your number
Amzoil