I've a problem whit an fvd like this how i can configurate? when for a digital input in the fvd stop and the moment to restablish the motor start a little velocity and when i push te signal to start this recover his operating velocity? which parameter is the correct in this device to make it?
Shutting down the main power deletes the program in the Fuji control? Do I have to reprogram the parameters previously set up? or it keeps in the memory even when main power is shut down?
To operate, commission and Set up FRENIC Lift inverter there are two possibilities: using inverter keypad or PC. For operation using a PC it is necessary to use the dedicated software Lift Loader. the question is how can i get the software and if possible a video to explain how can we use it in the pc connected to the ac drive . my regards
Hello there i have a qustion , i last configured my frenic-mega G1s4 but it has failed to start the motor, i feel i have provided the wrong parameters. Can i be assisted in any way whatsoever....
Ok Anthony, 2 things to start with, make sure it is in remote control mode by LEDs on the operator keypad, and then verify your start input is being activated. Follow this link for a digital copy of the Users manual if you need it www.galco.com/techdoc/fuic/frn003g1s-4u_um.pdf page 2-23 describes the EN input (mandatory for running) and page 2-34 shows its location, ok?
If you can change any parameters, you do not have the lock on. Is the drive stopped? Because some parameters can be changed "on the fly" and others can not. So make sure the drive is in stop mode first.
@@GalcoIndustrial yes the driver on stop mode, and i cant change all parameter, the parameters not blinking like in the video, so i cant change the parameters
You have to configure 1 of the 5 digital inputs for "Reset Alarm". Parameters code E01 to E05 configure input X1 to X5. Enter function 8 (Reset Alarm) at code E01 to make input X1 reset alarm.
Please make a video. External Breaking resistor programing parameters setting..
Do you have a Drive On Port adapter available for the VFD model FRN0044E2S to enable network access? name of part or link !
Are you referring to the adapter that is mounted on the front side of the drive?
www.galco.com/opc-e2-adp1-fuji-electric-ind-drives-controls.html
Should P02 be entered as KW or HP? 0.75KW = 1HP
I've a problem whit an fvd like this
how i can configurate? when for a digital input in the fvd stop and the moment to restablish the motor start a little velocity and when i push te signal to start this recover his operating velocity?
which parameter is the correct in this device to make it?
Shutting down the main power deletes the program in the Fuji control? Do I have to reprogram the parameters previously set up? or it keeps in the memory even when main power is shut down?
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Hello good day.... what the problem if all the button cannot function when pressing any button?
i want to know how to print rpm value
Hetting error oc3 ..wat it means ?
Hello, there is any parameter that can start the motor automatically, without pushing any bottom, just giving power to the inverter? Tanks
Hola, pudiste hechar a andar tu drive?
Can you give this model parameters FRN15E1S-4A please give me
Não consigo resolver o problema do meu inversor de frequência
How to connect to the computer, by what type of cable, the name of the connection port? pls help! thanks!
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Hello
i set on off time ?
Can I have a video on Inverter? Abb
Also specify parameters for running PMSM motor with drive?
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
អគុណបង😍🇰🇭
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Bhai helping me mchi motor 3 fess Ka kneksn krbana h Bhai mere pass fugii Ka cotrolr h smj me nhi aarah
To operate, commission and Set up FRENIC Lift inverter there are two possibilities:
using inverter keypad or PC. For operation using a PC it is necessary to use the
dedicated software Lift Loader.
the question is how can i get the software and if possible a video to explain how can we use it in the pc connected to the ac drive . my regards
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Er1 is occured on my drive.what are a solution for this error?
Er1 is a memory Error. If a memory error occurs, such as missing or invalid data, the protective function is activated.
@@GalcoIndustrial then what is the proper solution for this error
Thank you so much
How to riset error code ou3 plese help
How to remove alarm oc3.
Down me kap rahi hai fuji drive please solution
Never-mind. P99 selects it
Thanks you..👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Set pid ?thank
Fuji err ECF how to reper
Hello there i have a qustion , i last configured my frenic-mega G1s4 but it has failed to start the motor, i feel i have provided the wrong parameters. Can i be assisted in any way whatsoever....
Ok Anthony, 2 things to start with, make sure it is in remote control mode by LEDs on the operator keypad, and then verify your start input is being activated. Follow this link for a digital copy of the Users manual if you need it www.galco.com/techdoc/fuic/frn003g1s-4u_um.pdf page 2-23 describes the EN input (mandatory for running) and page 2-34 shows its location, ok?
Why i cant change all parameter?
The inverter have lock?
If you can change any parameters, you do not have the lock on. Is the drive stopped? Because some parameters can be changed "on the fly" and others can not. So make sure the drive is in stop mode first.
@@GalcoIndustrial yes the driver on stop mode, and i cant change all parameter, the parameters not blinking like in the video, so i cant change the parameters
i also have same prblm....give some suggestion plz
Why I can't change parameters? The inverter have lock? Please suggest me.
We are also the same please let us know the solution
Pls video of control connection
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Parámetros para motor de 1 HP. Para que arranque en automático .
Please set the parameter all g+4lift standared
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
How set the time motor off & on
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Sir Over it ho gaya toh kya kare
Why can't change digit value
How to display unlock ?
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Excuse me I Need Help??
Fuji drive start stop & Rew wiring with parameter video
Oc3?
How to reset by push button
Fugi drive
Mdl - FNC37G1S-4A
You have to configure 1 of the 5 digital inputs for "Reset Alarm". Parameters code E01 to E05 configure input X1 to X5. Enter function 8 (Reset Alarm) at code E01 to make input X1 reset alarm.
How do you turn the keypad LED on?
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Parametros para que arranque automático
Send me unlock perametar VFD fuji
parameter F 00(0000) only changed no other parameter change
th-cam.com/video/cUSgEiXRg0M/w-d-xo.html
FUZI MULTI DRIVE PROGRAMING CONNECTION & TUNNING FULL EXPLAIN
Kolhapur Side
URGENT Availability????
Hello
जय श्री गणेशजी की जय हो
tanks very much
how to auto mode cheng
Pls tock to hindi
excuse me.... I need HELP.
ok with what?