Another thing I found on those after market and even stock reed intake is to get all excess flash off of reed seet and make sure the Reed's are sitting flat against the seet. The one I ordered had a bump in the center and the Reed's weren't closing properly also adjusting your reed as far up and the reed holder down as much as you can will give you more flow when open and more seal when closed which is more crucial than being open. I fine tuned my son's and I could tell a huge difference just in cranking the engine it boosted compression by almost double and it just runs smoother and opens up quickly with less lagging. If anyone takes the time to read this I hope this helps sometimes it's the smallest things that make the biggest difference. Kudos from East Tennessee.
just all the standard mods....race pipe ..carbon reed ....big bore kit....boost bottle ...ECT...hope that helps..and feel free to watch some of my vids with some more tips
good one i always wonderd how they made a power band cool i will have to do that thanks pocket bikes are a lot of fun hell i put nice blue tooth system on mine bigger carb bigger chain bigger rims all kinds of stuffits 49 cc but it goes a bitt faster than it use to happy
Hey mate where do you buy the carbon fibre reed from have looked on eBay and they are all in the U.K. Is there any where in Aus who sell them mainly brissy
bro thanks for watching......any way im on the sunny coast...ill ask the guy i get my pocket bike parts from..not sure if he stocks them...ill have to get back to u about that...skullcam
No problems bro. Also I have a 2 stroke 50cc quad with one of these pocket rocket motors on it is it common for them to leak fuel from the bottom of the fuel tank where the fuel line connects up
maybe check the fuel hose...if its cheep quality...it just may not be sealing were connected.....if none of that id say it might be cracked around the fuel spout bit thingie on the tank
Hi :) I own a Polini 911 replica.... water coled 39cc i think its 5.2 hp...og 6.2 im thinking of putting the engine on my goped :P Best regards from Norway.
its ok modding up with carbon reeds and all that, but lets see sumit run with upgrades + never say skullcam ever again, it just really stonks from behond belief, ive just bin sick..
Hey mate I have a 49cc pocket bike 2 stroke.., and the pull start doesn't want to pull it feels like it's locked any ideas on wat I could do mate.... much appreciated and great vids
BEST BET WOULD BE TO PULL IT APART ...JUST DONT LET THAT WOUND UP SPRING IN SIDE THE PULL STARTER ...LOL....ITS A PAIN TO REWIND ....OTHER THAN THAT KINDA HARD FOR ME TO TELL WITH OUT SEEING IT...OR JUST GET A NEW ONE THEY ARE VERY CHEAP ON EBAY...HOPE THAT HELP .....skulcam
bro just a standard Chinese pocket bike carb on the pocket bike........ive never herd of a size reference for them......but if you find out let me know .....and thanks for watching
i have a Yueke 13/13 carburetor and it's exactly the same as every other generic pocket rocket carburetor so yeah a size 13/13 carb :D great vids btw skullcam!
you win nothing with this mod dooo.. You want more power then drill holes on side of piston and give more space for reeds to open doooooo and BAM it goes faster with more rpms..
hay thanks for watching...... first thing you should check is the carby ,and the fuel line ..im guessing its starving for fuel when the engine revs out
skullcam ive done all that but still don't work I don't want to spend to much money on it cause it could be cheaper buying another one but it's a fast engine I got of a friend
if its not the carb or fuel line..... maybe check the spark... if it has a strong spark... then just make sure you have no air leeks , check the gaskets and seals ...other than that check for good compression ...if low or none.... change the rings... hope that helps ..lol thats all i got.. if none of that works id have to see it to fix it.....
Another thing I found on those after market and even stock reed intake is to get all excess flash off of reed seet and make sure the Reed's are sitting flat against the seet. The one I ordered had a bump in the center and the Reed's weren't closing properly also adjusting your reed as far up and the reed holder down as much as you can will give you more flow when open and more seal when closed which is more crucial than being open. I fine tuned my son's and I could tell a huge difference just in cranking the engine it boosted compression by almost double and it just runs smoother and opens up quickly with less lagging. If anyone takes the time to read this I hope this helps sometimes it's the smallest things that make the biggest difference. Kudos from East Tennessee.
You know more about pocket bikes than me because I don't own one 🤣
yes im addicted to pocket bikes.....ive been riding them a long time now
I don't know why I'm watching I don't even a pocket bike, but I want one for CHRISTMAS
get one bro they are awesome.!!!
skullcam I am not allowed to get one
dang bro ,,,, HEY...NEVER STOP DREAMING YA JUST NEVA KNOW
skullcam I am still asking for Christmas , but I probably (definitely) won't get one. I want the GP RS-r from minipocketrockets.com
NEVER HURTS TO ASK BRO
People saying stop saying skullcam=🤡
I have a mx3 pocket bike , was wondering what i could improve to make it faster . Any suggestions?
just all the standard mods....race pipe ..carbon reed ....big bore kit....boost bottle ...ECT...hope that helps..and feel free to watch some of my vids with some more tips
good one i always wonderd how they made a power band cool i will have to do that thanks pocket bikes are a lot of fun hell i put nice blue tooth system on mine bigger carb bigger chain bigger rims all kinds of stuffits 49 cc but it goes a bitt faster than it use to happy
hey thanks for watching....and nice bike you have
nice mod!!
Maybe you can buy a high performance airfilter!!
😁😁👍
im actually going to to a vid on how to mod a standard air-filter...STAY TUNED 4 THAT ONE BRO
Nice! I'm looking forward!!👍
Very Good
Awesome video bro!
THANK YOU.....BRO
Just bought me a 47Cc pocket bike! Ready to mod!
nice.... hey and thanks for watching skullcam
A walbro carb with adapter and carbon fiber reeds will have the throttle of a chainsaw
I want to put the engine of the nitro nrg 49cc 9hp in a pocket bike. It's should be pretty good.
do a youtube vid on that ..ill watch
Stiff tuning these? Just got an old one not running. Ordered a bunch of parts. Thanks for the vids! Skullcammmmmm ☠📷
haha yeeeeah nice thanks for watching
I breaking my back on the floor, I will swap a table in the garage, nice vid
thanks man....hay yeah a table to work on is good
Hey mate where do you buy the carbon fibre reed from have looked on eBay and they are all in the U.K. Is there any where in Aus who sell them mainly brissy
bro thanks for watching......any way im on the sunny coast...ill ask the guy i get my pocket bike parts from..not sure if he stocks them...ill have to get back to u about that...skullcam
No problems bro. Also I have a 2 stroke 50cc quad with one of these pocket rocket motors on it is it common for them to leak fuel from the bottom of the fuel tank where the fuel line connects up
maybe check the fuel hose...if its cheep quality...it just may not be sealing were connected.....if none of that id say it might be cracked around the fuel spout bit thingie on the tank
how did you go with that reed bro...maybe try ebay
What ratio do you premix in your pocket bikes
i do 50/ to/ 1
I cant wait to get a pocket bike
Hi :)
I own a Polini 911 replica.... water coled 39cc i think its 5.2 hp...og 6.2 im thinking of putting the engine on my goped :P
Best regards from Norway.
NICE BIKE BRO ...IVE ALWAYS WANTED ONE OF THEM ....BUT HECK YEAH ..THAT ENGINE ON A GOPED WOW ..THAT WOULD BE SO AWESOME...HAY & WELCOME TO skullcam
Ik this is quite old but i have a 40cc pocket bike from amazon do you know any mods for it?
Please stop saying skullcam please
HA HA ..OK ILL TRY BUT CAN'T PROMISE ANYTHING...AND THANKS FOR TUNING IN BRO
Creative Builds I agree no more skull cam bull shit
@@thisboy4667 ...have a look at my new vids this one is so old
its ok modding up with carbon reeds and all that, but lets see sumit run with upgrades + never say skullcam ever again, it just really stonks from behond belief, ive just bin sick..
yo thanks for watching....and yes i have a vid of the bike running..!!!!!.skullcam..!!!!
yo check out my new vids and tell me wat you think
Scullcam🤟 lol
What bike is this and where do i get it? Also whats the top speed
one ebay ..they are air cooled two stroke or you can get a water cooled one ...way faster
Like the videos man!!!
THANK YOU...AND WELCOME 2= skullcam
Where do you get the reeed ?
welcome sc
hey thanks for watching
What’s the part called?
Hey mate I have a 49cc pocket bike 2 stroke.., and the pull start doesn't want to pull it feels like it's locked any ideas on wat I could do mate.... much appreciated and great vids
BEST BET WOULD BE TO PULL IT APART ...JUST DONT LET THAT WOUND UP SPRING IN SIDE THE PULL STARTER ...LOL....ITS A PAIN TO REWIND ....OTHER THAN THAT KINDA HARD FOR ME TO TELL WITH OUT SEEING IT...OR JUST GET A NEW ONE THEY ARE VERY CHEAP ON EBAY...HOPE THAT HELP .....skulcam
👍👍
nice video bro :)
thank you...BRO
aaaand???? what does it do?
👍🏻👍🏻👍🏻xD
hey thanks for watching
It said on ebay I need 2 carbon reed valves for my minimoto and it looks same as yours why do I need 2????please help someone I'm stuck.
you dont
just one
It’s a good video but really annoying with the skullcam and thumb up every five seconds. Stop it
Pocket bikes from compétitions Can go at 80-100km/h. How?
i think because most pro pocket bike rides have the water cooled Italian type SOOOO FAST BUT SOOOO EXPENSIVE
skullcam how is the mt4 39cc water cooled? Is it good?
ive never owned one ..but i know they are good
What kind of bikes and what's the cc
49cc two stroke pocket bike
How big carb do you have?
bro just a standard Chinese pocket bike carb on the pocket bike........ive never herd of a size reference for them......but if you find out let me know .....and thanks for watching
i have a Yueke 13/13 carburetor and it's exactly the same as every other generic pocket rocket carburetor so yeah a size 13/13 carb :D great vids btw skullcam!
kenan alibegovic........ thanks for that info......and thanks for watching
skullcam No problem, happy to help
feel fee to comment on my new vids ...any tip..or random comments are always welcome..
you win nothing with this mod dooo.. You want more power then drill holes on side of piston and give more space for reeds to open doooooo and BAM it goes faster with more rpms..
awesome thanks for the tips
Dsmtrendz
Can you help me I've got a 49cc quad and it starts but when I throttle the quad it cuts out
hay thanks for watching...... first thing you should check is the carby ,and the fuel line ..im guessing its starving for fuel when the engine revs out
skullcam ive done all that but still don't work I don't want to spend to much money on it cause it could be cheaper buying another one but it's a fast engine I got of a friend
if its not the carb or fuel line..... maybe check the spark... if it has a strong spark... then just make sure you have no air leeks , check the gaskets and seals ...other than that check for good compression ...if low or none.... change the rings... hope that helps ..lol thats all i got.. if none of that works id have to see it to fix it.....
skullcam ok mate thanks il try do that if it don't work il send u a video of quad running thanks anyway mate
ok thanks a gain for watching......hay send a vid id luv to see it