I am pissed off! Bought new spring and that puppy blew out on me and I was/am right back in pissed mode. Hands are killing me as I'm old and arthritic.
OMG! Thank You! Thank You!! Thank You!!! My spring went "everywhere" as you mentioned and was totally lost on fixing it. I did notice the notch in the cord wheel. Sooo thankful you made this to guide us all on a propper fix. Awesome advise. Again, thanks so much. N
Thank you so much for making this video! Mine is a Senix 4 cycle gas trimmer, and while the cord mechanism is not exactly the same, it is very similar. Thanks for sharing, very helpful!
This video needs more likes, it's the only one that is any use for the deep cover recoil. Everything else is for stuff with cups or larger radius springs which are easier. I tried the zip tie trick but it didn't work. Surprisingly the scotch tape did it.
Thanks to you I was finally able to fix my older Trimmer. Of course after I already bought a new one since i was unable to figure it out. Then their was your video, saver of the day.😁
This mower has been kicking for about 10 years now. Always had a short cord on it after the original snapped and other minor issues with the recoil starter th-cam.com/users/postUgkx-NCBSqqKJlyQ5_JGS_STpsFYihe7bmM3 until I finally had to open it up in an attempt to feed in a new line. I noticed it was all rusty and the coil was going but upon dismantling it was too much of a pain to get it all back in there correctly and opted to just get a new one. not sure why i waited so long to do so but it was a cheap, easy fix and it would have saved me hours of fiddling with the old rusty coil or trying to pull start and having cheap make-shift lines break in my hand during a pull. If yours is scuffed just replace it!
Thank you very much. How to catch the inner hook best advice. The tape works as well. Worked for old echo (metal casing recoil) trimmer. God bless.👍🙏🙏🙏❤️🔥
well that Brand has their act together! there's videos on here of other brands where a person has to take the clutch off and spindle shaft out and all hell.
My hands are killing me from pinching and winding only for that greasy thing to start sliding through my trembling arthritic fingers as i get close,wife is at the neighbors house and ain't no pliers or tape handy..guess I'll try again when hands stop shaking, might need a cold one 😉
I have really ripped myself up trying to fix mine! That little extra tip was the game changer for me. Thanks a lot. 😁🙏
Your very welcome
I was getting pissed off and tired of fooling with this spring so I thank you for clearing this up for us
my pleasure
I am pissed off! Bought new spring and that puppy blew out on me and I was/am right back in pissed mode. Hands are killing me as I'm old and arthritic.
OMG! Thank You! Thank You!! Thank You!!! My spring went "everywhere" as you mentioned and was totally lost on fixing it. I did notice the notch in the cord wheel. Sooo thankful you made this to guide us all on a propper fix. Awesome advise. Again, thanks so much. N
My pleasure!
@@tallcook37 I'll try it
This helped me understand how to get the tension back with pull-cord spring . Nice one, geezer!
My pleasure "child" !
Thanks man filming was great. Camera stayed on the main point the whole time 5 stars review
Thanks, I appreciated it
Thank you so much for making this video! Mine is a Senix 4 cycle gas trimmer, and while the cord mechanism is not exactly the same, it is very similar. Thanks for sharing, very helpful!
Your very welcome
This video needs more likes, it's the only one that is any use for the deep cover recoil. Everything else is for stuff with cups or larger radius springs which are easier. I tried the zip tie trick but it didn't work. Surprisingly the scotch tape did it.
Thanks to you I was finally able to fix my older Trimmer. Of course after I already bought a new one since i was unable to figure it out. Then their was your video, saver of the day.😁
Nice!
Thanks alot sir. You really saved me big time..!!!
Thank you so much sir!!! from a french guy
This mower has been kicking for about 10 years now. Always had a short cord on it after the original snapped and other minor issues with the recoil starter th-cam.com/users/postUgkx-NCBSqqKJlyQ5_JGS_STpsFYihe7bmM3 until I finally had to open it up in an attempt to feed in a new line. I noticed it was all rusty and the coil was going but upon dismantling it was too much of a pain to get it all back in there correctly and opted to just get a new one. not sure why i waited so long to do so but it was a cheap, easy fix and it would have saved me hours of fiddling with the old rusty coil or trying to pull start and having cheap make-shift lines break in my hand during a pull. If yours is scuffed just replace it!
Thank you very much. How to catch the inner hook best advice. The tape works as well. Worked for old echo (metal casing recoil) trimmer. God bless.👍🙏🙏🙏❤️🔥
Good video, that loop through the notch was key.
Ever wondered what Hell is? It’s a never ending loop trying to fix your pull cord.
Thank you for this video
Thank you so much for making this refurbishing an old hoffco weed eater this will help!
my pleasure, thanks for watching
Thank you for the knowledge just fixed my trimmer.
my pleasure
Super thanks brother for showing this illustration !❤❤❤❤😊😅😮😂😮😢🎉🎉🎉
Thank you very much. This video saves my day.
You’re very welcome!
THANK YOU! massive help
well that Brand has their act together! there's videos on here of other brands where a person has to take the clutch off and spindle shaft out and all hell.
great job -tanx 👍
Thank you!!! I was going crazy!!
Thank you sooo much! It really helps
You’re very welcome, thanks for commenting.
My hands are killing me from pinching and winding only for that greasy thing to start sliding through my trembling arthritic fingers as i get close,wife is at the neighbors house and ain't no pliers or tape handy..guess I'll try again when hands stop shaking, might need a cold one 😉
Good video, I appreciate it.
Good, thank you.
Great video, thank you
my pleasure
gracias me salvaste la patria
Now, how do you reattach to motor?
There is a spring loaded plastic wedge that stops the cord being pulled.
THANKS BRO I WAS HAVING A HELLOFA TIME LOL
Many thanks Great advice!
Your welcome!
Great video thanks!
AWESOME thank you!!
My Pleasure
خوش طريقة
Thanks
your welcome
thanks!
Good job
Wow! Thank You
my pleasure
Slt je possède une débroussailleuse SRM302A DX savoir où se trouve durite d'essence merci
Mine will not recoil its like its backwards if that makes sense
I can't picture it; did you make sure you are indeed not winding backwards? Have you got it fixed yet? let me know. Thanks
That spring is so hard to wrap and keep in place. Keeps unraveling on me.
First you have to degreasse it with brake cleaner or solvant! It will help in my opinion!
@@adrianaghitoaie2996 ok
What is brand name of your trimer?
This one was a Husqvarna.
In my case the center screw does not come out, it just goes round and round but I cannot remove it, does anyone know why?..... please.
Without a picture/seeing it, it's hard to diagnose what's happening there, have you got it sorted?
Gupi
Is there a meaning for this word?
Your voice sounds exactly how I feel when trying to fix these damn things. Great video !
Ha ha, i hear ya!
spring on mine makes it impossible to just wind it by hand