I think you have to use separate rectifier for each piezo element for better results. as in your circuit piezo connected parallel, it may cancel out of voltage of each other. Please correct me if I am wrong.
Idea: what if you integrate piezoelectric plate to speaker like plate and apply sound to it which makes soundplate and piezoelectric plates to vibrate. If this would work at certain vibrations you could apply that tech maybe in noisy environments like beside the highways where this soundplates would collect harmful noise and collect it into electricity. Imagine if you would collect energy from sound if 1 piezoelectric plate which generate that 0.3 V from one push then imagine if that plate vibrates like thousandfold.
Hey try keeping the pressure on the piezoplate for long and maintain it constant like use a 100 g weight......then check if output voltage is coming constant or not. If yes, then tell me.
Lekhram Chelak No, longer press would not effect the emf generation, since the generation depends upon rate of change of mechanical stress provided on the crystal. i.e, press and release in faster rate to get more generation.
Thanks Naman... Please support by sharing the video with your friends and do subscribe. Need to touch 1k ASAP to monetize. increase in number of subscribers motivate us to create more contents like this.
HELLO SIR. I liked the video. Sir can you tell me that what is the requirement and the connections of charging with so many piezo-electric materials like 25-30 piezo-electric plates. Kindly do reply .
which diodes you are using and how do you connect them for to make the rectifier bridge, which capacitor did you used...please explain better.....the image of the diodes is totally out of focus and doesn't help at all...
..very helpful. thankyou so much. sir is there any change in the output when the sensors connected series , parallel or both series and parallel?????? plz give me an ansr it for my project
This is a piezo plate, can be found in market of if you have buzzers or horns you can find inside.... The white part you are seeing is quartz crystal, which actually creates potential difference.
Yes clive, It works for real. And yes Peizo plates connected in parallel. I have participated and secured 1st position in few science fairs for an upgrade version of this idea.
Of course, you can do it. Just twist the ends of diodes with each other multiple times and apply insulation tape over it. Ensure to have a very tight connection. Though this isn't a very good idea but this will help you.
@@jasminecomia5276 Yes of course, that would be a perfect solution for experimenting purpose. If you are building it for science exhibition, its the best idea, since your circuit will be clearly visible to the examiner.
Kindly tell from where you bought all these materials , I can only buy online can u suggest from which site , since I also want to perform such experiments
Its totally d pends upon your need. If you need high voltage and current doesnt matter, connect in parallel. If you need high current and voltage doesnt matter for you, then connect in series. Balance the parallel and series combination as per you voltage and current requirement.
Is there any way to limit the output voltage. I mean consider a fluctuating voltage between 9v and 3v but I want that the current will flow only when the current is between 5.1v and 4.9v(not specifically but on an average nearly 5v). If possible please tell how or link a page or video or hint or make one video for that purpose please.
Sir I want know that what are the benefits of converting sound energy to electrical energy apart from generating electricity Please tell sir I want this for my project, please please please please
Brother!!.. please can you tell me what is the price of the peizo electric plate?? And Are these peizo plates available with different specifications??
Dear Sie what will happen, if I connect 4 or 5 volt dc at point where you connect ta multi-meter? will it work as water misting device ( humidification)? need detail of piezoelectric plate, I mean material, and how to make?
well its basically the same circuit as shown in the video. But, instead of piezoelectric plates u need to use piezo film strips, which is more sensitive to vibrations and thus sound.
@@Arvind2494 In my project i have connected 2 in series to increase voltage and 2 in parallel to increase current nd thus i have charged a 3.7 V li ion battery
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
I think you have to use separate rectifier for each piezo element for better results. as in your circuit piezo connected parallel, it may cancel out of voltage of each other.
Please correct me if I am wrong.
How much current (amp) Does it produce
Great job thanks.very innovative ideas.⭐⭐⭐ Bright Indian brain👍👍
Thanks Mr. virdi...I Will upload few more innovative ideas soon. Stay tuned
Great stuff! Thank you 👍
Excellent example!
Idea: what if you integrate piezoelectric plate to speaker like plate and apply sound to it which makes soundplate and piezoelectric plates to vibrate. If this would work at certain vibrations you could apply that tech maybe in noisy environments like beside the highways where this soundplates would collect harmful noise and collect it into electricity. Imagine if you would collect energy from sound if 1 piezoelectric plate which generate that 0.3 V from one push then imagine if that plate vibrates like thousandfold.
Hey try keeping the pressure on the piezoplate for long and maintain it constant like use a 100 g weight......then check if output voltage is coming constant or not. If yes, then tell me.
Lekhram Chelak No, longer press would not effect the emf generation, since the generation depends upon rate of change of mechanical stress provided on the crystal. i.e, press and release in faster rate to get more generation.
Very nice, wonderful video and well explained 👍👏👏
Thanks it helped me in my science exhibition
Pleased to help. Do share the video to ur frnds and juniors.
Good work !
Very useful! Thanks bro
Nice video. Well explained. Could you suggest how I can convert the generated voltage to approximately 5v and 0.2 amps to run an LED Bulb ?
Do you get more voltage if you press it harder? And is it exponential or is there a limit?
nice video , I am really inspired by ur video
Can we use piezoelectric vibration sensors for this purpose ??
Thanks for the demonstration
Awesome video
Good video keep Posting video like this
Thanks Naman... Please support by sharing the video with your friends and do subscribe. Need to touch 1k ASAP to monetize. increase in number of subscribers motivate us to create more contents like this.
شكرا جزيلا
Bro In India is this method of electricity generation is using more please please say this
How to use this with an oscilloscope, please explain
Good channel bro i have question is that a zener diode please reply its important
HELLO SIR. I liked the video. Sir can you tell me that what is the requirement and the connections of charging with so many piezo-electric materials like 25-30 piezo-electric plates. Kindly do reply .
Is it okay to not use a breadboard?
which diodes you are using and how do you connect them for to make the rectifier bridge, which capacitor did you used...please explain better.....the image of the diodes is totally out of focus and doesn't help at all...
nice well explained thank u
Awesome bro
Great video bro, pls keep it up!
Nice. Can u upload a video on how to build that circuit?
Hi can you tell specs of rectifier and capacitive transducer
Can we use More plates with 1 diode
In 3:12 second video which diode you used?
App pizoelectric plate me wire ko soldering kiye hai
Which type of diode is used
Bhai video ki link send kr do plz
And
Sub equipment ki ratings bhi bta de
can be used in analog ,digital multimeters
what is the value of capacitor?
Sir which capacitor have you used pls give full details
..very helpful. thankyou so much. sir is there any change in the output when the sensors connected series , parallel or both series and parallel?????? plz give me an ansr it for my project
Nice demonstration bro
👏👏But,What's the range of the total curret ?????
Wow... great project... thanks...
What is the size of the piezo plate used?.i mean diameter.
can you state me which material is used for the coated part (white part) on the copper base plate of the piezo device which u are using?
This is a piezo plate, can be found in market of if you have buzzers or horns you can find inside.... The white part you are seeing is quartz crystal, which actually creates potential difference.
Can u pls tell us how much current generated
and which diode did you use
Hi, how many cells required to generate 1w
How many current did you measure?
Hi, do you connect the piezo components in parallel? does this really work?
Yes clive, It works for real. And yes Peizo plates connected in parallel.
I have participated and secured 1st position in few science fairs for an upgrade version of this idea.
Which diode use in this experiment
Please explain no. Of diode
can you combine two diodes without using soldering? I don't have the tool to solder so its hard for me to combine them
Of course, you can do it. Just twist the ends of diodes with each other multiple times and apply insulation tape over it. Ensure to have a very tight connection. Though this isn't a very good idea but this will help you.
thank you sir but can I still place it on a breadboard despite having insulation tape?
@@jasminecomia5276 Yes of course, that would be a perfect solution for experimenting purpose.
If you are building it for science exhibition, its the best idea, since your circuit will be clearly visible to the examiner.
Can it charge 18650 batteries?
Muito bom ! Que tal fazer um teste com um vibralert de telefone e dar um start com 5 v como ele funciona com pulsos talvez gera energia ? Abraço !!!
can u please translate it into English
sorry, cant understand the language. english please
Thank you man
What wattage can produce?
This is great! What is the capacitance of the capacitor you used for 6 to 7 piezo plates?
Jepril Peña 16 volt 100 uf
Is there any way to increase its current?
How to measure current from piezoelectric sensor
plz wich diode have u used and can I use any diode
Old germaium diode I reckon. Only loose 0.3/4 Volts across it.
How to make mist with this plate
Kindly tell from where you bought all these materials , I can only buy online can u suggest from which site , since I also want to perform such experiments
Connect in parallel or series or mix which one is better ?and why? Thx
Tirawich Sukprasertkul parallel
Its totally d pends upon your need. If you need high voltage and current doesnt matter, connect in parallel.
If you need high current and voltage doesnt matter for you, then connect in series.
Balance the parallel and series combination as per you voltage and current requirement.
@@Arvind2494 parallel connection increase the current. Series connection increase the voltage...
Can you give us the Ckt diagram ?
what capacitor have you used bro?
Do you have a complete list of the materials?
Nice video btw 👍
Its mentioned in the video
What is the value of the diodes?
Witch diot is used hear
what is to be added to charge a smartphone
Is there any way to limit the output voltage.
I mean consider a fluctuating voltage between 9v and 3v but I want that the current will flow only when the current is between 5.1v and 4.9v(not specifically but on an average nearly 5v). If possible please tell how or link a page or video or hint or make one video for that purpose please.
en.m.wikipedia.org/wiki/Band-pass_filter
Band pass filter.... Use this.
@@Arvind2494 thank you
Please share subscribe 👍🏼
Please share subscribe 👍🏼
Sir what about the ratings of diodes and piezeo plates and capacitors pls comment it sir
Is it possible to make energy with producing steady pressure with piezo. For example just press and hold it with a specific pressure. Is it possible ?
no
its not possible
PROJECT ELECTROPEDIA I mean that would easily change the world if we had such a thing. Thanks for answering ❤️
how to calculate cap value in different load ?
Sir is there any way I can contact you? I am making a project on piezoelectric and need little help.
Sir I want know that what are the benefits of converting sound energy to electrical energy apart from generating electricity
Please tell sir I want this for my project, please please please please
You can measure intensity of the sound waves.
Thanks
If you add more piezo sensors to the circuit, is it the voltage output increase or the power ouput increase?
When added in series, current in the circuit increases.
When connected in parallel, voltage increases.
But, ultimately power increases. Since (P=V*I)
Thanks sir!
Sir please full video assemble
sir, please tell the values of capacitor and diodes, as when I went to shop they asked for values.
I want to connect with some led...where I can connect?? Across the capacitor????
is it actually work??
Yes miss Faria jannat Nilima, it actually works. I have won Best Innovation award, India for this tech.
I want to ask one thing if i connect 3 of the piezoelements together will it be enough to charge a powerbank.?
No, it wont be enough, As the energy generated through one plate is very less.
What is the value of ampere
How to make piezoelectric disc ?
Can you check and say whats the current output?
How many K resistance use
240v to 300v how many plates are required
I'm working on it can u help me
Ye type ka project diploma mechnical engineering me challah hai kya
Bhai can u pls share the connection video🙏
wat is the resistance value of the diodes in the bridge rectifier that u've used ?
Abigailpearlin Rajkumari that doesnt matters really, You can chose any small size diodes, Since we are dealing with very small voltage.
Brother!!.. please can you tell me what is the price of the peizo electric plate??
And
Are these peizo plates available with different specifications??
Yes they are available with different specifications. Even with different built materials. This peizo plate did cost me Rs 10 INR per piece.
Do you have any idea about the possible implications for this in a zero g environment let alone through thermal convection?
let alone the utilization of livestock.
a giant hourglass also comes to mind through utilization of gravity.
An auger in combination.
Piezoelectric discs are in parallel or series?
Parallel... But you can use a combination of parallel and series as well as per your current and voltage requirement.
could you send me that you use your circuit diagram and component values
Büşra Tekir its all given in the video brother. Have a look carefully.
How much cost reqired for this mini project
Hardly ₹ 100.
If you have multimeter and soldering iron already
@@Arvind2494
THANKS FOR INFORMATION
@@Arvind2494 pls send your contact details.
Ani 1 plate kiti volt electricity generat karu shakte
Dear Sie
what will happen, if I connect 4 or 5 volt dc at point where you connect ta multi-meter?
will it work as water misting device ( humidification)? need detail of piezoelectric plate, I mean material, and how to make?
As i know,u can buy it(piezo) from online shop
No... It will work as an electrical buzzer, since it will vibrate with a high frequency.
U just need to put a rectifier in middle
please send me the making of circuit to convert sound energy
well its basically the same circuit as shown in the video. But, instead of piezoelectric plates u need to use piezo film strips, which is more sensitive to vibrations and thus sound.
how much current it produces?
connections are parallel or series??
This is parallel connection. But you can do connection as per your requirement. Either parallel, series or even a cascade of both.
@@Arvind2494 In my project i have connected 2 in series to increase voltage and 2 in parallel to increase current nd thus i have charged a 3.7 V li ion battery
where to buy piezo
If you want you can connect with our organization for same project
From where did you got the piezo plates?
Of course market. Try any robotic shop or electronic component shop nearby you