ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Song - Honest Joe by ThrottleRod
Nissan Frontier SAS to 1 tons. 79 hpD60 and 78 14 bolt. locked and geared 4:1 with 5.13s. 37" Xterrains.
Biggest Baddest Nissan Frontier on Planet!
Nissan offroad off road super swamper bogger mud rock crawling extreme SAS Solid Axle Swap 37s trying some new tags to get more views 4x4 ford diesel dragster metal lol lindsay lohan paris hilton boobs toyota money holla tape 4wd ferrari run from police looser noob accident death f250 wheeling animal dog cat horse pretty webcam drug fight
Thanks! Hardest part...locating the front axle. Figuring out the front suspension and trying to keep it low as possible with a high pinion dana 60 front presented challenges. If I had to do it again I'd do it differently, but not sure I'd like it any better. Truck works well now as is. Thanks again!
@27MattG
thanks for posting and the tips! my motor has a few upgrades but no cams. and honestly i have not heard of BIG hp gains with the cams nor do i want a chunky idle. the gearing i have in the tcase and axles help quite a bit and i am satisfied with the overall power that is delivered to the tires/wheels. enjoy your frontier where you take it. anytime you want to push it to and past its limits...let me know and i'll point you in the right direction. cheers!
What a beast of a frontier!
i love the dog on the 3rd or 4th shot "hey guys, what's goin on?"
this truck was overbuilt specifically so it could be beat on and keep on doing its thing. its also very well maintained...better than most vehicles. this thing is not abused. its just used for what it was built for. don't hate
That is truly a thing of beauty. Been wanting one way too long. My day will come. The work looks awesome! Great job and great vid.
great job! very nice work i bet it took a lil while to finish...mine took me way too long!
What can I say,......impressive? No, that would be to little of a word to express how awesome your truck turn out to be. When you get a chance, come show it off at Truckmodcentral a forum for truck enthusiast you can find me there as OGTerror.
There was another red 4 door on tons. Sick truck man
Yes that Is what I meant by Outboarded. The springs are located outside of frame rail in front. 47" springs. Springs are the same width as the frame rail in the rear. I will be at the garage in a few days and will try to get some measurements.
thats awesome mate shame we cant have trucks that big registered here in australia i would do this to my navara, same colour and everything. ive already got a 7inch lift with 35s, but would look stock beside this beast, love your work, i take my hat off to ya..
@bowmaster24
they hold up well. 130k on mine and 50k of which was on 37 or larger tires. its been tested and ran hard and zero problems. the blocks on these motors are huge and really overkill for the output on these motors so they will take a good bit of abuse.
@BrokenMessiah13
Bumpers and all tube work are custom. You'll like yours on 33s. I ran with 33s for years. Worked great!
Love this video and the song just goes so well with it
BAD ASS FRONTY! YEEEEEEEEAAAAAA!
Just started the build on my 2001 frontier, but it's gonna take forever to get on your level bro, thanks for the motivation.
I drive a Jeep, and I can honestly say this is one of nicest Frontiers I have seen. Great Build! I guess it doesn't always have to be American to be tough hahaha.
Wow, You made your Nissan into a Beast! Nice music, video and just the right camera angle and good driving. Your video has my attention 100%..
YOU GET AN A + in beating on that truck
still a sick build in 2021
Hey! I live in Iceland and i just bought a frontier with patrol Axel and 38 inch tires!
awesome video! very good pace and nice mix of stills and footage.
man... the nicest truck ive seen in a long time! good job on this man!
Wow... nice build man
Bad ass!!! Man I love this thing and it gives me inspiration for my 05' Colly. It's got a Rancho Lift right now, but I'd like to go the route you did w/ a SAS and 37's. That thing can flex like a motha luva too, great work!!!
Sweet ride! I had an 01 as well with a 3" Calmini lift (which is crap IMO) But I loved that truck.
@BrokenMessiah13 Man I have an 04 fronty v6 3.3liter. Did your supercharger come stock or did you have to buy it aftermarket. Because I have been lookin for one and i cant find one if you could tell me I would appreciate it!
awesome truck, vid and song
@skaiter1007
on 37s it did fine. now on 40s and w/full hydro steering not so well. its built more for the dirt than pavement.
Dude, I'm a Toyota dude, but your truck really kick ass. It really really looks that you know what are you doing. Congrats! and keep going!
This video gave me some envy. LOL
Greetings from Mexico.
my buddies got an all stock 03 frontier crew cab took it up to a cave party last night handled the trail stock no lift as good as my buddies 6 inch lifted chevy but hey then again our other buddy got his mustang up there on 20's haha
@jerrajon
you are right. i should have just said i prefer not to disclose. anyway....parts in the neighborhood of 6k. and an estimate of 250hrs of labor. hope that helps.
this is bad ass! i wish my little 2dr 02 could do that...
Spring eyes are closer together in front vs in the rear. A slight angle outward as they go back.
@4X4punisher
the front 60 and rear 14blt were a package deal. and it would not benefit me to go with a rear 60; as my fron t60 is hp driver drop and gearing options are same as 14 bolt.
la toune de ce clip est écoeurante!!!!
I have my frontier back home and when i get back from Afghanistan ima try to do something like this
thanks! a bit more than i had originally planned.
What axles did you use for this I'm over in the UK and thinking of doing the same to mine, but if your into modifying vehicles over here you may as well be the devils son they fucking hate it. I've been looking at axles on common things round here like landys and patrols and land cruisers but all there front diffs are on the wrong side I've been told a jeep waggoner front axle fits and that's a Dana 44 or 40 I can't remember. But yeah I saw you swapped both the front and rear axle so if you wouldn't mind could you let me know what they were please
One sick truck man. All I can say is wow
really nice, would you like a truck with those axle gezz, never have to worry about breaking anything with a light truck and 1tons
nice rig awesome job looks great
Great job man! What did you use for a steering box and what springs did you use? Or if you have a build thread, could you share the link? Killer setup!
i'll make the shackles tomorrow similar to yours with spacers so i can get spring eyes as square as i can to the frame! i'll only make the shackles 2'' about standard ride height to pass road inspection! Australia got strict road mod laws!
thats a bad ass truck
Awesome inspiration man great job on the swap!
Custom piece. Can't recall width right off. Will try to remember to measure. It's kinda wide though. Springs are outboarded a little to accommodate axle width.
all racks and armor on that truck were homemade.
I have a 2001 frontier xe v6 reg cab but ur frontier is the reason I want a better paying job
@chewy089
depends on who makes it. i don't have time to make parts for people, but if i did my bumpers would likely be $750 parts.
my favorite truck.awsome job
it's a pretty involved swap. you might want to look on some ford forums and gather some information specific to your vehicle. good luck!
Really great vid. Love the car and the music.
Keep on crawlin!
outboarded! do mean that they are not dead straight they toe in to location from diff mounts! in the video at 4.24 minutes it shows there the hanger sticking out looking at it roughly between 4''-5" and yeah i'm finding that1.8m diff's though are going to be great for stability are a pain like you say locating cause of the length!
@skaiter1007
it doesn't any more. full hydro steer and 39s and beadlocks. too much for street use.
pro comp xterran
Sick truck, wish my frontier could do that
it's his truck. he keeps a close eye on things.
nice truck, been lookin to swap in a dana 44 into my ranger and was wonder what where ya got your leaf springs from and how wide the frame rails in your the rig are?
Amazing truck man. Puts my stock nismo to shame off road ahaha
Love it! Amazing job man!👍👍👍
Awesome, awesome, awesome!!!
@kdn3lson
this is when it had eagle alloys. raceline beadlocks now.
BADASS !!!! You guys put some work in for Sure ! My Frontier is still in the Making, Love Nissan ... I have ask though Is the V6 enough?
Nice truck
Holy fvck, you were thrashing that thing
nice job! did you do all the work yourself?
sick truck man, have fun :)
@bowmaster24
its sufficient with proper gearing, but not overkill by any means.
That is a weapon! do these have the 3L turbo diesel like the navaras?
that thing is bad fuckin ass nice work
Thanks buddy
that looks cool at 6:38.do you have like a nissan 4x4 group?if so sign me up , we need a nissan 4x4 group to put those toyota guys in their place.
p.s. im a chevy guy , but when it comes to foreign trucks its nissan all the way.
yeah i just went in to the shed and measured my springs and their 48" oh well! i also noticed below the front bar did you put a sheet steel brace from the front crossmember foward to a new box section piece and capped off the chassis or was it like that? reference 6.12 minutes cheers mate you really helpful, if you could pm me with the with measurements would be hugely helpful !!! thanks again
Drive it like you stole it !
awesome work, but... i think it wont fit into de garage again...
Beautiful truck both before and after the SAS. I love most 4x4 modified frontiers. What was the hardest thing when doing the swap?
@Tylonious
Appreciate it man!
Ive got a 98 Frontier with 248,000 on her and she runs like a champ. Im getting a new Frontier here shortly. A 2005-07 model, 4Dr,4x4.... how do these V6s hold up?
i know quite a few of the guys at the raleigh location.
amazing!!
agreed. if you have time...find me a song...i'll swap it out.
GOOD STUFF!!
@Dieselboy350
4x4parts.com 2.5" upper control arms and custom leaf pack.
@rouseinthehouse76
all of it is expensive. just to go SAS with my specs about 6gs.
No. Must have been a different rig. Mine is in driveway and never been for sale.
@recon501
thanks man! good luck with your build. what's the set-up gonna be?
i am planning on doing this when i get the money for it. how much did the first part cost you?
Hey brother just wondering why you went for a leafspring set up rather than a coil spring set up. thanks brother
Where did u get the rack that was in the bed of the truck?
Was this for sale about a year ago in Washington state?
what is the length of your front leaf hanger if it's custom? or did you use a aftermarket Hilux hanger?
@mediansscareme
yes and with some help from some friends.
AWESOME! whats the build cost on some thing like this?
i have a 94 d21 how hard is a solid axle swap and wats the best axle. should i do front and back. thanks in advance
how is it on the hw tho?? cause i was thinking of doin somethin like this myself on a tacoma or ranger and making a lil offroad rig
sweet! good job MEN needs exo skeleton.
@darkrival0 Is the torque and power as good as they say?
Reserved Handicap Parking @ 5:47 haha
Wait what four wheel parts center did you go to??
How difficult is this swap? I wanna do the same thing to my 84 f150 but I dont know where to start. Do I need a donor truck? Any help would be great!