This is exactly what I think I want for my home. I don't want to buy a multitude of differing wifi bulbs or switches or what have you. I want a central place to be able to wire circuits to, and then have them controlled at that one place. Also so that it's easier to either wire and/or change a circuit to NO or NC. But I need to be able to do it while remodeling.
yes, we have smart relay controller, KC868-H32B Pro have 32 channel relay output, if you want NO,NC, just add our extend relay module KC868-E16v2 is ok, here is video tour about it: th-cam.com/video/Cks-6NPXkF8/w-d-xo.html
If i wanted to use this to control all the lighting in my home, could it still be used with light switches in the wall? also, how would the wiring diagram for that look where does the neutral ground and live connect to in the panel?
yes, the control system support wall switch, but that is "momentary" wall switch, not need LIVE and Neutral line. just two wire OPEN/CLOSE to toggle relay.
Hi, perfect product, Looks very good. Please can you show some software to program whole thging, to works with mobile phone, internet, how to set inputs, outputs... Thanks
In this case I need a wireless scheme, when the patient touches the bell button, it makes the computer and mobile phone ring, indicating the room number.
@@KinCony all buttons have wires and go to a board, it was in this board that I wanted to change from analog to wireless to receive on mobile phones and computer
@@Commandos.3 you can see our KC868-AI input module, that can feedback to pc web and mobile phone app, one board connect with 48 channel bell buttons. here is video tour: th-cam.com/video/eYaoFPldjjs/w-d-xo.html
Hi there Very nice smart device. Do you perhaps have your distribution outlet in Johannesburg. Also, in-terms of the relays and circuit breakers, can I just the ones we use in South Africa rather. Then I just need to order the rest of the other modules? Let me know. Thanks
th-cam.com/video/Ae4CDMBKRwA/w-d-xo.html this is 2023 newest smart distribution board DIY video tour, have diagram download link in video description.😃
i think you can see this newest solution:Home Automation 32CH Distribution Board DIY | Smart IOT Project 2023! th-cam.com/video/Ae4CDMBKRwA/w-d-xo.html
for switch panel from our board use CAT5 network cable is ok, actually can use any wire. relay output wire need according to your load MAX current use single core wire.
I would love to see something that's able to communicate with something like a Tesla power pack to read the remaining battery reserves. That way the home automation software would cut off more of a house's power use to keep the fridge & the chest freezer from shutting off & spoiling it's contents. Due to winter storms some homes lose power & not have it restored for a full week. With a 2nd circuit you could isolate essential electrical objects from the unnecessary so the TV won't be powered by a wall battery pack but the fridge & a single LED light bulb that's used for night navigation in the hallway would be. I think that it would be even cooler if you could automate a smart window to fog up when the outdoor temperature reaches a specific high temperature range to save money on a building's cooling.
now can connect power meter or power failure sensor or CT sensor to COLB logical controller, it can preset by automatic control. smart window we have a demo video like this:th-cam.com/video/e1khSbs5E6Q/w-d-xo.html it can open/close window automatic by sensor.
Can you add voice to this system, if so can you show me how? Also my big confusion is running the wires to the lights, fans, and other items. Do I just run a small wire from the Kincony box to the that is already wired or do i need to rewire the switch to the knicony box. Also where does the main power come in from. I can see the 12v power .
we have voice module for google and alexa, you can see another video. if your old device wire is already independently, you will easy to connected, unless you need rewire for load that you want to control. there is power supply for AC220v ->DC12v inside of power box.
@@KinCony all devices in the power box have a predetermined height and depth, this is not an accident, your product has non-standard dimensions for installation on a DIN rail, this is not a problem for custom and industrial boxes, but a great difficulty for standard ones used for apartments where the distance between DIN rails is difficult to change because of the decorative plastron covering all modules.
Hie guys, is it possible to control that kincony control module if you are not connected to the same wifi. In other words is possible to control from wherever you are as long you have internet connection
yes, just only connect to internet, then people can use mobile phone in any where to control relay (not outside of Earth:) ) . Not must your phone and your relay controller connect to same router.
Sir don't you have a Distributor in Nigeria, because am concise about the wait time to order the materials from your store. If there is a Distributor in Nigeria please let me knw and if there isn't then let discuss how one could be available. Nigeria need this badly
Is that ok if the ac contactors arranged to be the load contact point instead of breaker (mcb). With that arrangement, we can utilize the common double pole switch of the ac contactor.
breaker(MCB) can't be replaced, because the AC contactor will not auto STOP if over load.AC contactor only for small current control large cureent use.
Pls mr. How is the switch can be work in full distribution box,i see you connect switch wth it's terminal board,so how will be work in db,is the switches cable be on switch terminal board or they will be on circuit breakers
Hi Kincony IoT, i'm from India, i want to purchase your products but shipping to india is not available or we can buy three items for the price they are charging for delivery, can you please help me in this? i was interested in your product, but i can afford only the product and 15 % extra over item pricing,
th-cam.com/video/Ae4CDMBKRwA/w-d-xo.html this is 2023 newest smart distribution board DIY video tour, have diagram download link in video description.😃
Шкаф собран просто отвратительно!!!!! Как минимум надо поменять местами автоматические выключатели и контакторы, ввод на автоматах собрать гребенчатой шиной, а нули собрать проводниками на кросс модуле
This is exactly what I think I want for my home. I don't want to buy a multitude of differing wifi bulbs or switches or what have you. I want a central place to be able to wire circuits to, and then have them controlled at that one place. Also so that it's easier to either wire and/or change a circuit to NO or NC.
But I need to be able to do it while remodeling.
yes, we have smart relay controller, KC868-H32B Pro have 32 channel relay output, if you want NO,NC, just add our extend relay module KC868-E16v2 is ok, here is video tour about it: th-cam.com/video/Cks-6NPXkF8/w-d-xo.html
If i wanted to use this to control all the lighting in my home, could it still be used with light switches in the wall? also, how would the wiring diagram for that look where does the neutral ground and live connect to in the panel?
yes, the control system support wall switch, but that is "momentary" wall switch, not need LIVE and Neutral line. just two wire OPEN/CLOSE to toggle relay.
Can this control things like hot shower and fridge plugs?
yes, use by contactor, MAX current 25A, enough for load to use.
Hi, perfect product, Looks very good. Please can you show some software to program whole thging, to works with mobile phone, internet, how to set inputs, outputs... Thanks
it support tuya app, this is the newest solution: th-cam.com/video/Ae4CDMBKRwA/w-d-xo.html
Do you have projects for bells for hospital rooms?
the relay output also can connect to bell load.
In this case I need a wireless scheme, when the patient touches the bell button, it makes the computer and mobile phone ring, indicating the room number.
@@Commandos.3 bell button can't wire with controller? must wireless?
@@KinCony all buttons have wires and go to a board, it was in this board that I wanted to change from analog to wireless to receive on mobile phones and computer
@@Commandos.3 you can see our KC868-AI input module, that can feedback to pc web and mobile phone app, one board connect with 48 channel bell buttons. here is video tour: th-cam.com/video/eYaoFPldjjs/w-d-xo.html
Hi there
Very nice smart device.
Do you perhaps have your distribution outlet in Johannesburg.
Also, in-terms of the relays and circuit breakers, can I just the ones we use in South Africa rather. Then I just need to order the rest of the other modules?
Let me know. Thanks
sure, you can chose any relay and breaker, not MUST kincony's , but main controller use by KinCony's is ok.
Excellent
But why don't you use the duct?
th-cam.com/video/Ae4CDMBKRwA/w-d-xo.html this is 2023 newest smart distribution board DIY video tour, have diagram download link in video description.😃
Great video...
Clear explanation
thanks
hi i am from iran. i need this board for my home
ok, you can order our controller from our online store: kincony.aliexpress.com
You can set time for the lamp to on and off automatically?
yes, no problem
Can this smart db control other gadgets aside lighting?
yes, of course.
How much this cost in $ for an idea?
i think you can see this newest solution:Home Automation 32CH Distribution Board DIY | Smart IOT Project 2023!
th-cam.com/video/Ae4CDMBKRwA/w-d-xo.html
Wow! This is beautiful!
Good day sir,
Please what is the procedure to design home automated like this?
Am much interested in the project.
www.kincony.com/forum/showthread.php?tid=1744
Sir which type of cable should I use to make a smart home should I use cat 6 cable, normal installation cable or both to wire?
for switch panel from our board use CAT5 network cable is ok, actually can use any wire. relay output wire need according to your load MAX current use single core wire.
Please can I get complete smart DB to buy
sure, contact with us, customsize make a smart DB for you.
bu setten sipariş versem ne zaman gelir
about 2 weeks
I would love to see something that's able to communicate with something like a Tesla power pack to read the remaining battery reserves. That way the home automation software would cut off more of a house's power use to keep the fridge & the chest freezer from shutting off & spoiling it's contents. Due to winter storms some homes lose power & not have it restored for a full week.
With a 2nd circuit you could isolate essential electrical objects from the unnecessary so the TV won't be powered by a wall battery pack but the fridge & a single LED light bulb that's used for night navigation in the hallway would be.
I think that it would be even cooler if you could automate a smart window to fog up when the outdoor temperature reaches a specific high temperature range to save money on a building's cooling.
now can connect power meter or power failure sensor or CT sensor to COLB logical controller, it can preset by automatic control. smart window we have a demo video like this:th-cam.com/video/e1khSbs5E6Q/w-d-xo.html it can open/close window automatic by sensor.
Sir can you share a AMF Panel
what's "AMF"?
Hi sir your manufacturing product list and machine list
add whatsapp number: +86-15381188302 we send to you list.
Interested to buy
thanks
Hi sir, what is the main breaker ampacity for that box?
use 2P 63A breaker
Can you add voice to this system, if so can you show me how? Also my big confusion is running the wires to the lights, fans, and other items. Do I just run a small wire from the Kincony box to the that is already wired or do i need to rewire the switch to the knicony box. Also where does the main power come in from. I can see the 12v power .
we have voice module for google and alexa, you can see another video. if your old device wire is already independently, you will easy to connected, unless you need rewire for load that you want to control. there is power supply for AC220v ->DC12v inside of power box.
@@KinCony I prefer not to rewire what is you best system to use. I also want to control fans. If can be done I want to be able to do. It
@@sergioorlandodilone1153 control fan need use kc868-D8 dimmer controller with SSR , we have another demo video.
Здравствуйте, как называется приложение с которым он будет работать?
now we use tuya mobile phone application.
Please Sir Kya Aap Meri Maddat Kar Sakte aise hi system banane me
yes, we can.you can contact with us.
@@KinCony thanks So Much sir this opportunity 👍
nice product, however not possible to install for apartments with current dimensions
need put new wire for the DB
@@KinCony all devices in the power box have a predetermined height and depth, this is not an accident, your product has non-standard dimensions for installation on a DIN rail, this is not a problem for custom and industrial boxes, but a great difficulty for standard ones used for apartments where the distance between DIN rails is difficult to change because of the decorative plastron covering all modules.
@@sergijg yes, so if want use more module for more functions, suggest re-install the DB box, not use old box, not enough space.
Hie guys, is it possible to control that kincony control module if you are not connected to the same wifi. In other words is possible to control from wherever you are as long you have internet connection
yes, just only connect to internet, then people can use mobile phone in any where to control relay (not outside of Earth:) ) . Not must your phone and your relay controller connect to same router.
Thank you
Is it work localhost?
it can work in localhost and remote control by internet. both can do.
Sir don't you have a Distributor in Nigeria, because am concise about the wait time to order the materials from your store. If there is a Distributor in Nigeria please let me knw and if there isn't then let discuss how one could be available. Nigeria need this badly
hello, sorry, not have Distributor in Nigeria, but all products you can order from our online store: kincony.aliexpress.com
@@KinCony the time to receive it is nearly a month, assuming I hav a contract to deliver in a week time I can meet up.
@@lemonade_ag contact us by whatsapp number: +86-15381188302 we can help you to find a fast way and make invoice for you.
Is that ok if the ac contactors arranged to be the load contact point instead of breaker (mcb). With that arrangement, we can utilize the common double pole switch of the ac contactor.
breaker(MCB) can't be replaced, because the AC contactor will not auto STOP if over load.AC contactor only for small current control large cureent use.
@@KinCony what i mean is that the breaker will be behind the ac contactor, load will connect to the ac contactor than the breaker.
@@mohammadfauziyahaya1459 this also can be done, but let load connect to breaker directly is better.
@@KinCony what is your recommendation for this kind of system for some load that normally using traditional double pole switch.
@@mohammadfauziyahaya1459 do you means one light use two switch panel to control in different place?
Can i buy all in kit?
yes, here is all kits: www.aliexpress.com/item/1005002136269231.html?spm=2114.12010612.8148356.11.702238d9D4A1N2
please make a video on kincony smart switches and gateway
later when have time can make it
Will be very happy 😊
Because I think the kincony smart relay is more suitable for industrial purposes
@@MA-jg9dx yes, it's also suitable for Industry and agriculture
This powerful control panel can also be use for concealed A.c unit 1.5 ton. And also for oven.
sure, just replace the AC contactor with large current version.
@@KinCony it's possible to use ur smart control panel to the entire residential house. Thnks house it cost ur smart control panel.pakage.
@@sibugnestor3462 yes, of course.
@@KinCony how much it cost ur designed smart panel sir.
@@sibugnestor3462 you can see price in our online store: kincony.aliexpress.com
Hi can Integrate the distribution box with hubitat hub.
i have not used hubitat, but if it support MQTT, it can be integrated.
Pls mr. How is the switch can be work in full distribution box,i see you connect switch wth it's terminal board,so how will be work in db,is the switches cable be on switch terminal board or they will be on circuit breakers
switch panel button line is connect to switch terminal board.
Ok so then the switch board will be connected with circuit breaker?
@@muazurabiu9812 switch board is connect with relay controller by RS232 cable. relay controller output->AC contactor->circuit breaker.
@@KinCony so what about the switch cable? May it go directly to the switch board or to the circuit breaker?
Because the thing that i didn't understand is that the switch cable must necessary be on terminal switch board? Or it's ok to be on circuit breaker
Hi Kincony IoT,
i'm from India, i want to purchase your products but shipping to india is not available or we can buy three items for the price they are charging for delivery, can you please help me in this?
i was interested in your product, but i can afford only the product and 15 % extra over item pricing,
hello, add whatsapp number: +86-15381188302
th-cam.com/video/Ae4CDMBKRwA/w-d-xo.html this is 2023 newest smart distribution board DIY video tour, have diagram download link in video description.😃
Cost in dollars pl
you can visit our online store
Nice 👍👍👍
wow!!! Thanks!!!
you are welcome
هل يوجد شرح بالغة العربية
الرجاء اختيار اللغة المناسبة في عرض الترجمة
If i cam send a plan for a project for a house cam You make a panel ready for instal ?.
If so You can send me an email to Talk about the costs ?
yes, we support customized make DB. email: xuwei@kincony.com
No English in hindi
❤
Шкаф собран просто отвратительно!!!!! Как минимум надо поменять местами автоматические выключатели и контакторы, ввод на автоматах собрать гребенчатой шиной, а нули собрать проводниками на кросс модуле
Iwtbanb *
?