How to Replace Front Lower Control Arm 2003-2007 Honda Accord
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ia/1ASL...
This video shows you how to install new control arms in your 2003-2007 Honda Accord. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pry Bar 1aau.to/oXp/1AX...
• 14mm Wrench 1aau.to/oZE/1AX...
• 17mm Wrench 1aau.to/oZE/1AX...
• 14mm Socket 1aau.to/obEu/1A...
• 17mm Socket 1aau.to/obEu/1A...
• 19mm Socket 1aau.to/oani/1A...
• 32mm Socket 1aau.to/ocY/1AA...
• Locking Pliers 1aau.to/omz/1AX...
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ou3/1AX...
• Swivel
• Torque Wrench 1aau.to/oaMo/1A...
• Gloves 1aau.to/oanD/1A...
• Safety Glasses 1aau.to/oafs/1A...
• 3/16 Allen Wrench 1aau.to/o3/1AXA...
• Floor Jack 1aau.to/oabB/1A...
• Hammer 1aau.to/oWW/1AX...
• Jack Stands 1aau.to/oYA/1AX...
• Punch
• Rubber Mallet 1aau.to/ohp/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great step-by-step directions and video. Thanks very much, would not have been able to get this done without your instruction. As a New York vehicle, ours was a bit tougher without a professional level impact gun and a ton of rust and corrosion on an 03. Would not do it again lol, but definitely can see how it’s worth it to a car with less rust!
I was quoted 800.00 to replace both control arms and this includes front end alighnment. Is this reasonable?
What should a shop charge for this? Year 2024. Every thing is pretty high now
you did not need to remove the drive shaft centre nut ? why the hell did you do that LOL
I thought the same thing, but I also think it is to keep the cv axel together without doing damage as the arm swings into place. I also think it may fit without having to swing it in place. When I do this to my car I will find out and post an update.
thanks guys
I can really relate to those corroded wheels, mine too exactly the same
Look easier than just replacing the bushing?
@TRQ How long would you stay it takes for both side replacing
My lower was so rusted I needed to resort to a saw-all in order to get this out.In northeast everything is completely rusted making everything completely seized nothing comes apart like yours did.Its not a easy job at all.Including the strut yoke.
Bolt and nut sizes are different on the Honda Accord, rear bolt is actually a 12mm I believe.
Excelente video
Is it difficult without a lift?
Strut fork will not line back up