Yamaha MT09 turbo built by Extreme Creations on dyno
ฝัง
- เผยแพร่เมื่อ 15 พ.ย. 2014
- Here's a video of our first MT-09 turbo kit equipped bike being tuned on the dyno, As a comparison this bike made 131hp in stock form on this dyno.
Turbo kit available from our store www.extremecreations.com.au/y... - ยานยนต์และพาหนะ
Stock : wheelie
Turbo : backflip
Exacly
😁🤭
You need to be juvenile to even consider a wheelie.
@@worldhello1234 and really boring not to....
Fr my mt09 is my only vehicle.I ride the hell out of it everyday an the idea of that much power looks stupid. The bike will easily power wheelie in 2nd at 50 to 65 mph and can hold that wheelie up to 6th at speed stock. Still wanna get a turbo but i might just die.
Can we all just take a minute to admire that man's calves? And recommend tightening those rear straps a little?
You can clearly see when the turbo kicks in with this loosen straps
Read the pinned comment. The rear roller is un-loaded so the front roller takes the measurements. It's not designed for a motorcycle so this strapping is intentional.@@martinsosa3453
The dyno being used in this video is at a nearby automotive workshop, it's a car dyno with 4 rollers, the rear 2 are idlers which are only there to steady the vehicle, If you watch any video of a car being tuned on this type of dyno you will see they climb the front roller slightly during the run, while it's more exaggerated in this video its doing the same thing although being a car dyno it does read slightly differently to a bike dyno. The rear rollers drag up to 25hp out of the power figure. We mentioned the before figure so you can make your own judgements on what sort of increase we are seeing 207-131 = a 76hp gain, the math isn't that hard but a lot of people making comments don't seem to be able to wrap their heads around it. This video was made 5 years ago & we now have our own in house bike dyno that reads 10% lower than a dynojet ( which seems to be what everyone compares to) so a 115hp on Dynojet bike only reads 104hp on our dyno, now we get comments like why is it making so little power? Now because this is the internet & everyone is an expert on what is correct we always give before power figures so you can see what the gain is rather than just the outright number, we are not trying to cheat anyone by strapping the bike differently or whatever, We are making much more than this nowadays anyway & we take our bikes to the track to prove the numbers we are seeing on the dyno.
There is currently only about 40 of our MT09 turbo kits out there in the world so it's a very small market & we are cool with that.
top speed mt09 turbo ????
Strap your bike down better. Love the bike tho.
extcreat do u have to put better parts in the engine or can u turbocharged the the bike stock??
extcreat and what type of brake kit did he put on the bike
Goodnight brothers, MT 09 é Monsters d+ 🤜🤜🤜✊✊✊👏👏👏👍
That bike makes more power than my car
@@armazelfun yeah because Car is heavy u idiot , motorcycle just 2 wheel and make acceleration good
@@kimiroihanz9924 hp has nothing to do with weight
@@kimiroihanz9924 Since when 2 wheels make for good acceleration? 500+ hp mercedes wins 1000cc superbike in acceleration
@@megapet777 where you going to fond a 500hp Mercedes lmao
@@decaygamer194 th-cam.com/video/5hcpzEHiHcg/w-d-xo.html
I'm a complete fan of this kit! really cool
Thats one stunning looking turbo setup! :-D
Headed this direction with my Ninja. I'd like to come close to 60 HP when I'm done. Love this vid. 🏍️😁
131bhp from a stock MT-09? That has to be the most optimistic dyno in the world.
this is awesome keep up the good work
Absolute madness. And now I want one.
Awesome bike. Wish it was in my garage any day.
Pretty serious rear brake setup there!!
[takes off glasses] Mother of God.
That's a really sharp system
This is why I’m über excited for the R9.
damn fine gentlemen congratulations
Man iys suprising there are so few tuners out there with so many experts on the internet 🤔
Woow very nice and clean :D
Damn 200+ hp I'm sure this thing is a beast on the drag strip a stock Mt 09 already is but this, this is just mad
I can't wait till they tune up the r7
They already have. R7 engine same as MT07.
That's awesome... That's backflip machine. Exacly!
I need this in my life
At least you have a constant rear tire heater handy
Amazing 😋
One for the fz07 now please:) I'll be the first customer!
Mt09 207 hp😳🔥
Can’t wait for the mt-10 turbo
We've had a MT10 kit available for 3 years www.extremecreations.com.au/yamaha-mt10-fz10-turbo-kit
wow! its a Monster ! ;-)
is the engine stock ? or did you change crankshaft rods , pistons for the turbo or something else ? very nice !
Lets boost everything. 192 really wakes that thing up! Sheesh
That bike sounds like a truck, insane, is a dream
It seem like people don't understand how it's work.
If it's start with 130 and after - it's 207, that about 60% gain.
Mt09 have about 105 hp original so after the turbo it's about 160-170.
105? I guess around 115..
Mr M. 105 at the rear wheel not at the crank... you have loses like every car or bike
Well like everything else different dunes give different numbers, so one might show 105(though the bike is rated at 115 from factory)and one might show more. Moreover this bike has an aftermarket ecu, not stock so its possible they tightened up the tune and made more hp before adding the turbo. My only concern would be a lack of apparent intercooler but probably wouldn't be a problem as you're not at full throttle for very long usually
My bike makes 116 to the wheel with 73k miles
mine tuned is making 119hp at the wheel so if the loss to the wheel is 8% or 10% its close to 130hp at the crank
Bravíssimo
damn this thing is hard!
Looks like an extended swingarm... since a stock MT/FZ 09 already power wheelies like crazy.
This isn't streetable. First pothole you hit, the oil line on the turbo is gone, and so is the engine.
Literalmente ese kit le subió 100 hp!!!!
How do you do with a 11.5:1 compression ratio ?
+michaelovitch Modern bike engines are different to cars as they are higher revving engines with smaller cylinders & produce peak torque higher in the rev range, with a correctly sized turbo this reduces the chances of detonation occurring & enables bikes to safely run higher compression ratios in boosted applications.
+extcreat
Thank you.
can we see that baby flying on the road :)
great.....
Brutal
That turbo oil feed line and oil pump looks very vounerable when placed like that. But nice power gain :p
is that an aftermarket swing arm or stock at 1:40 till end? and if it stock how many cm do you add to those swing arm?
Those crackles and pops tho. Damn. Great power. Shit👌🏽👌🏽👌🏽👌🏽👌🏽 where are you guys based?
hay que hacer un kit turbo para mt 10, seria bestial.
Same sound of old F1 turbo 👌
what are the actual dyno numbers using both rollers? thinking somewhere around 160?
Jonathon Vince yeah he cheated
I spent a day with a turbo bike on a car dyno with it strapped down only on the front roller. Power numbers were obviously high which was confirmed with later runs on a dynojet dyno. Your credibility takes a hit in my eyes doing what you did. I have had a turbo bike for 40 years or so and built another more recently plus I’ve done thousands of runs with a number of other bikes so not just a keyboard warrior.
There's also a modified swingarm that isn't mentioned that I would think would be required for this turbo mod.
Nice! Which intake air temp at full boost?
Great music, what is that?
Worst mistake i made getting rid of my MT09! Il get another one, and il be purchasing this beautiful turbo kit when i do. Awsome!
hello how are you greetings from Paraguay, a question will be that the turbo is going to do well to the Yamaha MT 03 too? And how many horsepower would the bike have?
Fuck Ben how good does that sound!!!
how many cm added to that modified swing arm? and is that an aftermarket swing arm or stock?
I was worried the 2020 Mt-09 wouldnt get the Ice flow paint...im getting one and I want that paint
that's the first yamaha mt 09 to hit 200 hp yet
That would be amazing to have done to mine
waiting for a 2023 xsr900/mt-09 turbo kit
Aí sim
JEEZ Guys,That 3 Cylinder has MORE HP than a Standard NEW R1.
Hello,the exauhst that comes with the kit does it have papers to be street legal, is it with db killer or not,asking because for some european countries it is a must be for registration?
You guys making a kit for the FZ-07/MT-07 in the future?
They do make the full turbo kit for the MT07, it was the first one they did then the MT09 and to be fair the mt07 kit is only £2200 without flash or tuning but you can start and ride the bike turbo fitted if your running a power commander.
Waow
Great ! what is the top speed now?
If the sproket is smaller damn it will fly
Is that car in the background just sitting on its brake rotors? lol
Sorry, I'm OCD. Awesome bike!
sounds like a triple should very tidy setup.
Oh fuck yeah.. that bitch is a beast... nice
nuts
I wonder are you guys going to make a kit for the new yamaha fz10? People keep complaining how much hp it's got. But to be honest I just use my cbr125r to get to school, so I don't need alot of power lol. A turbo on my cbr125r might make it act like a slow 300cc lol XD
Wanna make your engine more reliable? If yes this is the perfect pack for you
i would be dead in an 1hour riding that thing
Search for kawasaki h2r, the tuned ones. Wouldn't last 20 seconds 😇
yes officer its stock
I haven't been to all the comments, but were you able to get rid of the top speed limiter of the MT-09? I've seen in many places it's electronically limited to 225 km/h.
Clément Dutter Yes the Reflash gets rid of the limiter.
extcreat Thanks! Very impressive work :)
Do u do a kit for MT-07
Hola para montar un turbo a una moto ay q montarle intercooler o asi directamente o mejor me podrias dar un listado de lo que necesito para ponerle turbo a mi moto Gracias
This power is on the wheel?
The hell is the deal with the 3 calipers on the rear brake?
+Tboninator That one is a stunt bike for the Australian Yamaha sponsored rider Dave McKenna
its all for fake style just like the fake hp numbers
Real fake. I'm sure it's all CGI th-cam.com/video/PaInuavW9tY/w-d-xo.html
@@doctorchuck14 why is that fake. A 1000cc bike can easily make 190hp so 190hp from a turbod 900 is easily capable.
@@doctorchuck14 AND THE GAYEST COMMENT AWARD GOES TO....
stock piston and rod?
200hp OMG
can the stock internals handle turbo?
Hoooryyy sheettttttt
@Bruno Garcia
What kinda turbo did you slap on her?? Asking for a friend lol
Where are these people located?
How on earth did the bike measure at 131hp in STOCK form??? Is this dyno at all reliable?
GI D these bikes don’t make that much power yet this company still advertisers 190 plus rear wheel
Hp. Having tuned one of these recently around a genuine 170 is max. The one I did made 164hp. Unfortunately EC advertise a false figure to sell the units.
flash
Well if the mechanic cant read the result ,it gets aload more horsepower.
Or he makes up a reading
the fucking bake brake on that thing
Now my thoughts, why this over say the FZ1? The R1 engine is a well built engine, and there have been quite a few bolt on turbos for the R1, so why isnt there more for the FZ1?
I put a GSXR1000 K5 on two dynos on the same day. 173 rwbhp on a Dynostar dyno and 157 rwbhp on a dynojet dyno. Beware of the claims.
Also there must be severe turbo lag as the turbo is mounted so far away from the header pipes and so far away from the fuel injection.
Didn’t seem very laggy to me, when he hit in 6th that last time it jumped right up and started spooling. Do you even turbo, bro? 🤔
Imagine how much torque is this bike
Thank you Dave McKenna.
what make and model is the turbo?
I noticed in the first part of the video the bike had the stock swingarm and the turbo was extremely close to the rear wheel. With the temp of the turbo it would probably melt the rear tire. On the dyno I see a modified swingarm installed. Can you ride with a stock swingarm or is a modified swingarm required?
James Hargrove The kit is designed to work either with or without swingarm extensions, the closest part of the turbo to the tyre is the compressor housing (the cold side) & there's plenty of space between the hot side & the wheel for it not to affect the tyre temp. This is also with the wheel adjusted all the way forward & without anyone on the bike so the tyre will only move away from the housing during use.The only problem with using the stock swingarm length is how to keep the front wheel down :-).
could you please tell me where you brought the hanbrake bracket from? Thanks
We make them www.store.extremecreations.com.au/multi-caliper-brake-bracket
333 km/h ?
seeing as how dyno power is a formula of dyno roller weight times acceleration times acceleration. how about you tie it down properly and stop cheating your customers.
yeah. kinda lieing arnt they
You shouldnt take Dyno results that seriously, PERIOD...Dynos are for tuning, not benchmarking.
+Error01
Words of wisdom. The only thing a dyno is good for is showing a loss or gain in performance and even then you could argue the validity of results.
That falls under tuning my man.
Next up: S1000 RR turbo test ?
What the extended swing arm necessary or just for cosmetics?
shorter wheelbase makes it easier to wheelie. they extend it to keep the power manageable.
The rear wheel needs to be rolling on both rollers for resistance or loaded down and kept on the one roller im sure ,i could be wrong and would really appreciate an answer or a new longer video showing and explaining why the bike is allowed to travell up the roller as im positive you would get a shit load of sales as i have looked at the price for full turbo kit without install [i would do my own] at a very reasonable price
See above
What is that opening song?
But how reliable is that at 190 and 207hp?