This is like Onewheel and EUC had a baby and that baby got only the worst parts of both it's parents. I'm so proud of the innovation that is being displayed here.
Innovative stuff right here!! And kudos to Eevees for the hookup and Begode for the repair deal at S'nS! But yea, this video was wholesome and hilarious...loved it!
Literally an hour before i saw this video I rode onewheel with friend on EUC and talked with him about the possibility of turning an EUC into onewheel by adding footpads to the front and back and turning onewheel into EUC by adding footpads on the sides. When I got home this was the first video on my YT home page :)
OMG! Love it! You guys are so creative!!! I primarily ride my EUC’s now but chill on my OneWheels often. I DO want a “Ride” right in the middle. Can you imagine 30 mph on a V11 “Convert” Whew! Maybe a V13 at 55mph!!!! Now That’s Smoking!!!!
Roll and ride is always the way to go because that's basically how you step on every EUC, so it makes sense that you jump on this Frankenstein's monster like a skateboard, though I'd probably recalibrate the gyro so it always wants to be nose up and cover the back with teflon. Fun video idea, though me and the rest of the angry villagers are probably going to chase it out with pitchforks and burn it later.
This is a great demonstration for those who don't understand why a Onewheel nosedives fairly easily and EUCs don't. EUCs do nosedive if you ride them like a Onewheel. It's the Onewheel form factor with feet in front and behind the axle instead of on the axle.
Aside from the springiness of your polymer rail mounts, the settings on the wheel can be adjusted to make it more responsive. Begode EUCs have a pedal hardness parameter you can adjust, set it to level 3 for maximum stiffness this should increase the responsiveness and get rid of some of that doughy feeling you compare to a poor vesc tune.
@@TheFloatLife The mten 4 doesn't have a lot of torque either. With the extra leverage from the onewheel deck, you will easily over-lean the wheel. It's pretty easy to over-lean on the stock pedals tbf. Strap the deck on a master or perhaps more realistically a T4 and if you can straddle the larger wheel it'll likely ride a lot better. Would probably be pretty thrilling at full chooch! 😯
oh I got an idea! If you put some pedals on the side of this thing then remove those platforms in the front and back, it might be a lot easier to go up and down stuff without scraping! Also you could add some kind of pads sticking out over your feet, so you could lift the thing when jumping 😀 Try that next, I wanna see it! 😀
Lmao true and it's funny to see people on here call the mten4 a baby etc when it destroys any OW specs in terms of battery size, motor size, tire size, and voltage.
I did with my OG euc some years back before vesc hoping to make my own onewheel. It was unridable and so dangerous. The transition between front and back was just way too sensitive to hold a constant speed in one direction. It worked well as a standard euc.
Its called the Gotway dip. Always been & likely how is goin be. Not much of an issue on short pedals but ofcos, its a diff ballgame with a long OW frame. Still I thought it did well for what it is & isnt
@@TheFloatLife In addition to "hard"/ "medium" and "soft" mode on the app, there is a selection for presetting the tilt-angle either forward or back... I would recommend setting this to a 3-4 degree tilt-back for regular riding, then intermittently switch to 5-7 degrees tilt-forward for downhill sections and going down stairs. It's adjustable on the fly through your phone.
I feel you an the Ankle. Blew mine out 9 days ago. Still FUBAR, black N blue and still slightly swollen.. I want to ride sooooo bad too. New Enduro tire on, untested. Maybe next week....
V Kewl boyz! If you upload the plans for the rails & OW platform, I mite think bout moddin my mten4. Maybe. Looks really sketchy when you guys ride it 😅
You could fit extra batteries for double the range as there is usually batteries inside the one wheel foot pads and that would also give more torque margin.
Was the Mode Setting in the Begode app set to Soft? Great idea to use existing rails! Is TFL now the new Braille Army for PEVs? It wouldn't bother me, unless you make a board from teeth. 14:27 Elijah's impression of a chalk outline.
It's dipping because it's highly underpowered and that's the EUC letting you know to back off before it cuts out lol. Also it's a Begode so....yea be careful.
So is a crash called a Nose Out or a Cut Dive?
Yes
@@TheFloatLife Its a Nose Cut Dive Out
This is like Onewheel and EUC had a baby and that baby got only the worst parts of both it's parents. I'm so proud of the innovation that is being displayed here.
I wonder what riding mode it was on, also they could fix the nose being low with pedal angle.
But I still Love BOTH Parents lol
Innovative stuff right here!! And kudos to Eevees for the hookup and Begode for the repair deal at S'nS! But yea, this video was wholesome and hilarious...loved it!
Love these experimental videos. Tons of fun... and crashes. Love
Always fun to watch yall play!
Literally an hour before i saw this video I rode onewheel with friend on EUC and talked with him about the possibility of turning an EUC into onewheel by adding footpads to the front and back and turning onewheel into EUC by adding footpads on the sides. When I got home this was the first video on my YT home page :)
Holy divinity
LATE!
They were obviously listening ;)
I like the beep after the crash...its like a heart rate monitor. "We still have a pulse!"
OMG! Love it!
You guys are so creative!!!
I primarily ride my EUC’s now but chill on my OneWheels often.
I DO want a “Ride” right in the middle.
Can you imagine 30 mph on a V11 “Convert”
Whew!
Maybe a V13 at 55mph!!!!
Now That’s Smoking!!!!
Roll and ride is always the way to go because that's basically how you step on every EUC, so it makes sense that you jump on this Frankenstein's monster like a skateboard, though I'd probably recalibrate the gyro so it always wants to be nose up and cover the back with teflon. Fun video idea, though me and the rest of the angry villagers are probably going to chase it out with pitchforks and burn it later.
This is rad! Fun to see this experiments! Keep it up, float on!
This makes me so glad the Onewheel doesn't beep.
Foreshadowing.
I heard about Bodhi's collarbone and thought for sure it was gonna be in this video. Hope surgery goes well
This is a great demonstration for those who don't understand why a Onewheel nosedives fairly easily and EUCs don't. EUCs do nosedive if you ride them like a Onewheel. It's the Onewheel form factor with feet in front and behind the axle instead of on the axle.
Wow this video was hilarious 🤣
Bhodi falls and I'm like "is this how it happened?" oh no he's ok sheeeeeeeeeesh
I'm amazed it worked as well as it did to do everything you guys did on it
That’s cool as hell. Damn impressive riding. Innovation. Luv it😃🤙
We'll have a bunch of MTEN4s at Oak City Shredfest if anyone wants to try one!
send cut send then sell those adapters. makes good use of those stock rails and footpads.
Make some euc accessories for us to buy. Get eevees sell them😏
That's crazy different. I think I'd break my neck so I'll stick to my OW but loved watching you guys rip it up and tear it up.
Love the video, Go Julian !! You guys gave her a good first run!!
Aside from the springiness of your polymer rail mounts, the settings on the wheel can be adjusted to make it more responsive. Begode EUCs have a pedal hardness parameter you can adjust, set it to level 3 for maximum stiffness this should increase the responsiveness and get rid of some of that doughy feeling you compare to a poor vesc tune.
It’s in hard mode
@@TheFloatLife The mten 4 doesn't have a lot of torque either. With the extra leverage from the onewheel deck, you will easily over-lean the wheel. It's pretty easy to over-lean on the stock pedals tbf. Strap the deck on a master or perhaps more realistically a T4 and if you can straddle the larger wheel it'll likely ride a lot better. Would probably be pretty thrilling at full chooch! 😯
Awesome idea Julian!
Glad to see your all healed up bodhi
Hahaha it does actually have ride modes, it was probably in soft, try hard mode for bonks and bollies
It was in hard
oh I got an idea! If you put some pedals on the side of this thing then remove those platforms in the front and back, it might be a lot easier to go up and down stuff without scraping! Also you could add some kind of pads sticking out over your feet, so you could lift the thing when jumping 😀
Try that next, I wanna see it! 😀
what an absolutely insane and original idea!
@@TheFloatLife JUST DO IT!
You guys are living the dream.
Careful playing with EUC's, may find them more fun than ow's
NEVER forget where you came from lol
Lmao true and it's funny to see people on here call the mten4 a baby etc when it destroys any OW specs in terms of battery size, motor size, tire size, and voltage.
I want to work at float life when i grow up! =)
Y'know those cursed photoshops of two things that have little business being combined? That's exactly what that creature looks like!
That is Nar!!!!❤❤❤ LETS GO!!
my little mten4 is really fun to ride, funny to see it as a one wheel haha!
Its so ridiculous but still... looks fun 😂
Guys can we agree bonk is a better than bollie? Like bollie is a combination of the two, and bonk is funner to say! XD
I did with my OG euc some years back before vesc hoping to make my own onewheel. It was unridable and so dangerous. The transition between front and back was just way too sensitive to hold a constant speed in one direction. It worked well as a standard euc.
Just…Wow. Amazing !! 😃😄
Thanks my dude!!!!
Awesome! Looks like you guys had it in soft mode? Might be why it feel like its dipping a lot
Nope! Hard mode, but the little Mten doesn’t like the overhanging pressure
@@TheFloatLife yeah that extra leverage is wild. its not made to handle that.
Its called the Gotway dip. Always been & likely how is goin be. Not much of an issue on short pedals but ofcos, its a diff ballgame with a long OW frame. Still I thought it did well for what it is & isnt
12:38 - That train looks crazy.
"one last thing!"..... "That's not what we had planned.." XD
I already did this with 2 2x4 and zip ties to the petals. The think is major sketch 😂
I see it in the thumbnail haha, looks even tippier than ours!
10:36 Bodhi is apparently a sinker, not a floater
😹😹😹😹😹
Man, trying to go down stairs with no pads on normal peddals is sketch. But that is nuts. Also curious if it was in hard mode for this test.
Definitely sketch, definitely hard mode
@@TheFloatLife In addition to "hard"/ "medium" and "soft" mode on the app, there is a selection for presetting the tilt-angle either forward or back... I would recommend setting this to a 3-4 degree tilt-back for regular riding, then intermittently switch to 5-7 degrees tilt-forward for downhill sections and going down stairs. It's adjustable on the fly through your phone.
😂 Bring it to shredfest!
Y’all are in Sacramento 😮 epic!
Nice, your half way there ;)
I'm amazed that little mten4 didn't cut out or just fry the mobo 😅
Great build and video guys
Mten4 specs spank any one wheel lmao... what's surprising about it? 1000 watt motor and 750 wh battery at 84v.
@@MikeMPharmaCyclist Yeah, I've ridden an mten4, sketchy little wheel, easy to overpower
@@Simonisms now say the same about the OW and admit it's even easier to over power and we're good! 🤣
@@MikeMPharmaCyclist I only rode a Onewheel one time. Felt like a fun toy, but they never last the distance on our mixed pev group rides.
I love this so much!
You guys arent human ❤
I feel you an the Ankle. Blew mine out 9 days ago. Still FUBAR, black N blue and still slightly swollen.. I want to ride sooooo bad too. New Enduro tire on, untested. Maybe next week....
Imagine an EUC/OW with foldable CROSS pedals/footpads
Now let’s do some GT WTF rails on the Master!
yeah the master is way WAY too big lmao
I’m stoked to go ride
Are you stoked to go ride?
I’m stoked to go ride
I’m stoked to go ride
I’m stoked to go ride
I’m stoked to go ride
I like that you can wear your ballcap under those skate helmets. Who makes those?
Now do this with a Begode Master. You'll have the most powerful OneWheel ever made.
V Kewl boyz! If you upload the plans for the rails & OW platform, I mite think bout moddin my mten4. Maybe. Looks really sketchy when you guys ride it 😅
Where did you get that helmet that looks like a baseball hat?
You could fit extra batteries for double the range as there is usually batteries inside the one wheel foot pads and that would also give more torque margin.
I took your likes to 667 the neighbor of the beast ! Sweet action vid . Cool mod build.
Hell and fire is going on next door
Was the Mode Setting in the Begode app set to Soft? Great idea to use existing rails! Is TFL now the new Braille Army for PEVs? It wouldn't bother me, unless you make a board from teeth.
14:27 Elijah's impression of a chalk outline.
it was in hard mode
When will One-wheels start to come with suspension systems?
Can yall make a vid abt pintx wtf rails? Would be great to get info abt tilt kits, intallation, etc.
what kind of range are you looking at for that ?
LOL, this is so dumb... I LOVE IT! :)
Try this again. Put that into soft mode to help get it a bit more flowyy
I'm working on suspension for OW boards. It's gonna improve off road performance a bunch...just need funding now.
8:20 RIP Bodhi
It's the Frankenstein's Monster of PEV's. Yes, Frankenstein is the name of the Dr. not the name of the monster.
Daym it worked!! 😅
This is sick
Absolute mayhem I love it lol
Hoooo it's really amazing
Gotta get ya on that Fusion 360
Blender fo lyfe
@@TheFloatLife 😂
Time to try this again with the upgraded faster mten5.
I'm waiting for the mten6.9
@@TheFloatLife 🤙should be put next April 20th
This video was lit as heck. Y’all going to have Shibby time in your next video? I heard y’all were hanging out.
Hey Bodhi! Is your wtf Pint Re-wheeled?
It's dipping because it's highly underpowered and that's the EUC letting you know to back off before it cuts out lol. Also it's a Begode so....yea be careful.
It’s higher voltage than any onewheel, not quite sure what you’re talking about
Which had more power this or a gt lol
love it! 🤣🤣🤣
How about a speed test???
So this is how Bodhi broke his collar bone
Maybe waterproof wxternal leds or an embedded mini lightbar in front
Next build use something like a Begode Master, then speed test!
You trying to kill us!?
Bodhi calling a pedal on the EUC an angle sensor... 😂
no he was talking about how you activate the euc to make it balance and he is right about it
5:20 haha
First 1:30 how #BodhiHarrison breaks his shoulder.
I wanna see this done with a kingsong16x
I'm now a rider of the UCE.
🤯
Let’s see you grind some rails
Julian, you shoulda hit me up for engineering support! Next time you are feeling inventive, drop me a line!
I can print you that bracket in carbon fiber nylon…. 😊
We're doubling down on blender, baby
You guys are fucking crazy 🤣
Add more batteries in the board widen the tire and rip onewheel
Let's take an EUC and make it worse! What a concept 😀
This is better in every way, prove me wrong
do it with an inmotion v13 =]
When onewheel and euc have a baby. Where's the Bollie?
Sooo yeah.... uhh I'm in......SWEEEEEETTAHHH....
I appreciate the helmets my guys
You guys are out of control
Please change the riding mode in the app!!!!