Yeah… the trick work you guys do on these boards is beyond a Master’s class! I absolutely love that your group is putting the Adv through its paces. I am one of the very early adopters of the Floatwheel Adv and it’s great to put the nay-sayers to rest about what these FW boards are capable of. 🔥👏👏
Dayum... watching 👀 so close to figure out my next board. You guys are KILLING the coverage and content (as always) to help the experienced and new floaters 🎉
Glad you enjoy it, however, something I don't understand from Jesse's conclusion: the Floatwheel uses the exact same app and software parameters than any vesc. So if you like how this board was reacting, you could use the same profile with another vesc board. However the motor, rails etc won't be the same of course.
Holly cow. I rewatched the part where Jesse talks about bonking over sand bags. What street greatness from Jesse. There are sand bags holding down a sign at the end of my driveway. Just got back and checked them out. Yeah, at least one of them is staying at its current address.
Idk if this is just me, but the motor sound at 7:03 sounds a bit like supercharger whine and i think thats freakin sick! When the time comes to get a new board, i might have to look into these floatwheels, especially if they all sound like this
So damn happy seeing you guys enjoying it so much! I absolutely LOVE my adv. it’s fully taken over for me. Excited to see more adv content from you guys! Killer video!
Great review. The lighter boards are delightful, heavier ones have the torque, always a trade-off I guess. As time goes on I continue to love the pint W setup for screwing around, low range stuff. Can't wait to see how the new hubs influence trick & trail setups out there.
While my Floatwheel is being worked on, I nose dived on my GT 2 twice at low speed while just cruising around. It's super embarrassing too when it happens in public. I really miss activation that just works.
Can't we all just add a V to whatever board we have put a Vesc into. I've put a Lil FOCer into a GT so i've been calling it a GTV, we already have ADV, so XRV, Pint XV etc. Anyways, awesome video as always, Jesse is killing it, and Bodhi with the Shove Drop was sick. Vesc is for sure the future of this sport.
@@thechickentendy3982 Yeah this is true, I do plan on taking everything FM out of my boards eventually, so one day I will be in the same boat. I'm still calling mine a GTV it was a GT, still has a Hypercore, Control & Battery Boxes. Until I remove those Parts, it's still a Vesc in a GT Platform, so for me it works, for now..... DIY makes sense, but it is also too broad of a statement same as Vesc, you have to follow up with one wheeled balance skateboard, and that doesn't roll of the tongue either. Damn this naming thing is Hard, Onewheel is too good of a name.
Another great one guys. What I want to know, will the Canon Core Motor go into or onto, current WTF rails. . . because for me, yowza....or, maybe, Robert and Jeff could, I dunno, start swapping parts to get. . . a lighter, Canon Core Mashup!!! Future is bright, gonna have to wear Bodhi Shades™...
Very awesome video! Deff makes me interested in looking into a floatwheel.. currently riding a OW Pint. Was considering GT or XR.. but the ADV looks great!
My pint s comes in today. So excited. Probs gonna use it for a couple years, sell it and put it towards a floatwheel. Breaking $2k at once on a first board just felt awful. But def gonna ditch fm in the future for a floatwheel after my pint s!
dope tricks Jesse! very impressive for a first session on a floatwheel. But hey please change that tune for tricks. You gotta tame that thing. make it buttery and you will love it
I’ve never been to cali but I feel like I know my way around Sacramento. Throw some old float plates over that brittle plastic until the new formula shows up.
Thanks for posting!! Hey, questions, please 🙏🏼… I’m trying to decide between ADV(molicell battery) and ADVpro~ besides appearance and height adjustment design, is there any real difference between them and the ride feel of the boards? (..Also, if someone could kindly explain why/ under what circumstances someone might want to lower or raise the height of the board from a centered position?) ..and has the ‘tire rubbing’ issue on FW stock boards been resolved? Thank you for any thoughts you might have on the comparison of these boards!!!
Yet another great video. My ADV should be shipping this week! Would thereny way someone could do a Vesc tuning tutorial? I've watched Tony's video on the setup numerous times. That's great for the initial setup but I have yet to find a helpful video for how the tuning part works. How does one add, for instance, Jeff's tail tune vs his butter street tune? What do the settings do? I would love y'all to the moon and back if something like this could be created. ✌️
8:26 Skate-stops are sacrilegious. 10:10 Was there an attempt to bonk up the three(?) stair at the foot of the bridge? With all that torque, does the tire wear out faster? Put some serious nobbies on there (like the Mten4 tire), and see what you can crawl up!
letsss goo !!!! put a stunt pack in the back w/ some wtfs !! or the bodhi street rails !! moooooooorrrreeee adv floatwheel / vesc content !!!!!! maybe get a superflux motor tricked out in floaatlife mods !!!
The boys went out without their microphones for this session, tried some new premiere features to get it cleaned up, but its still in beta so theres still some kinks!
How does everyone feel with what floaty Mcfly posted about how we should support floatwheel!??!? Illegal product for us?? Let’s hear some talking about it float life
Hat off to @floaty for calling a spade a spade. Illegitimate company bypassing US laws and regulations that may impact all of us that love to Onewheel. Keep this black market board out of this country!
Still not there. The torque on those bonks is way too high, the curve is there for a reason. Needs to be tuned down. Also, wear your helmets! One bad spill and you're a different person.
Like they said, it can be tuned down! I've tried Jeff's trail tune, it's aggressive AF lol, I'm impressed it did as well as it did for tricks with that tune haha.
Stoked to see new boards out there, would love to add a float wheel to the collection. Not sure why but I completely hate the company, it seems shady. “Tony” has got a bigger mouth than Elon musk and the Floatwheel diehards are as pretentious as Tesla owners. Innovation breeds competition which is good for everyone. I’m hopeful that Floatwheel shapes up to be a legitimate business that can fully compete, right now they’re playing catch up.
@@MrDmadness hmm, with “good” being such a general term, I’m going to say yes. I think they do/have done far more good things than bad/poor things. Mind you, this is one persons view point, who is very involved in the community (self proclaimed). In fact I think it is easier to list the things I would like to see onewheel change versus the list of things that they do, that I think are good. Their customer service team feeds you line like Apple repair technicians, I think there are 5 typical responses. Onewheel uses the standard marketing verbiage like any other major company, which can be misleading if you don’t do your research. Making a proprietary tire size for their device, but doing so distastefully (why make the tire have less sidewall??). Taking forever with custom shaping (looks like it might be worth the wait). Not allowing vendors to also act as verifiable service centers. My last and biggest complaint, making the board auto wipe if the battery is disconnected. Most of these complaints make perfect sense from a business standpoint so I don’t think they’re even that valid. Consumers and producers are always gonna want different things, the good companies are the ones that find a middle ground and I think Future motion is pretty dang close.
If you’re not sure, why you hate them, the you should maybe just rethink your opinion. Why do you think they’re shady? So far they‘ve been great. They worked their asses off to ship that amazing board and their support is the best I‘ve ever seen. They are the opposite of shady. And only because I love my adv, it doesn’t mean I‘m like a Tesla fanboy.
@@laurentbeauregard4666 futurd motion stole the design and then patented it. I hsve over 30,000 km riding on xr models but the cimpany us absolute garbage snd is going to get buried by vesc, which is superior in every single way. If you can name sonething fm does that vesc doesnt do better im all ears. Fm is a comlsny so willfully ignorant they tried to code lock out s tech device not realizing the age we are in. Ot tool a whole hour to make their bstter to bms locked board work with any battery... thats the level of stupid thats running future motion.
Check the latest video on the Floatwheel channel. It’s already fixed and much better than the old one. I hope my new plastics will come soon. The current (old) plastic won’t last much longer😅
More Floatwheel content!
The Bodhi shuv of the drop was insane!!! While he’s recovering too 🤯
Building my second VESC and Bodhi's Floaty comment about tricks stokes the hell out of me. Jesse's a beaaaasttt!
Yeah… the trick work you guys do on these boards is beyond a Master’s class! I absolutely love that your group is putting the Adv through its paces. I am one of the very early adopters of the Floatwheel Adv and it’s great to put the nay-sayers to rest about what these FW boards are capable of. 🔥👏👏
Wow you can tell in this video…Tony has successfully improved the onewheel with the floatwheel..my next board is a floatwheel.
You guys blow my mind lol.
🤯
Dayum... watching 👀 so close to figure out my next board. You guys are KILLING the coverage and content (as always) to help the experienced and new floaters 🎉
Glad you enjoy it, however, something I don't understand from Jesse's conclusion: the Floatwheel uses the exact same app and software parameters than any vesc. So if you like how this board was reacting, you could use the same profile with another vesc board. However the motor, rails etc won't be the same of course.
Holly cow. I rewatched the part where Jesse talks about bonking over sand bags. What street greatness from Jesse. There are sand bags holding down a sign at the end of my driveway. Just got back and checked them out. Yeah, at least one of them is staying at its current address.
So sick!
Dudes!!! What a bad ass truck session! Can’t wait for these to really come into their own and have a big 3rd party offering…. 😘
Bro's just got the Kendama strapped the whole time lmao 🔥
Lol, awe shit I didn't realize that's what that was, I noticed it on the spot with the chain
Idk if this is just me, but the motor sound at 7:03 sounds a bit like supercharger whine and i think thats freakin sick! When the time comes to get a new board, i might have to look into these floatwheels, especially if they all sound like this
I will say all the stuff thats coming out just makes the world of One Wheels more exciting. Its only going to keep getting better and better.
So damn happy seeing you guys enjoying it so much! I absolutely LOVE my adv. it’s fully taken over for me. Excited to see more adv content from you guys! Killer video!
Let's gooooooo!!!
Great review. The lighter boards are delightful, heavier ones have the torque, always a trade-off I guess. As time goes on I continue to love the pint W setup for screwing around, low range stuff. Can't wait to see how the new hubs influence trick & trail setups out there.
Props to rider and board both. Took the licking and kept on tricking!
Yo that shot of that revert in 14:22 was insane! That should go on your floatwheel highlight reel!
While my Floatwheel is being worked on, I nose dived on my GT 2 twice at low speed while just cruising around. It's super embarrassing too when it happens in public. I really miss activation that just works.
The sensor is still a problem on GTs? I have an xr and want to up my game. I think I'm just going FW adv next
Under that bridge looks simple - but it holds a lot of potential, lots of nice nudges for sure 👊🏻
great vid. keen to see a full review once the new plastic comes out.
Can't we all just add a V to whatever board we have put a Vesc into. I've put a Lil FOCer into a GT so i've been calling it a GTV, we already have ADV, so XRV, Pint XV etc. Anyways, awesome video as always, Jesse is killing it, and Bodhi with the Shove Drop was sick. Vesc is for sure the future of this sport.
I just call mine a VESC. There are no Future Motion parts in mine so calling it an XRV is a bit disingenuous. @mariocontino calls his boards DIYs.
@@thechickentendy3982 Yeah this is true, I do plan on taking everything FM out of my boards eventually, so one day I will be in the same boat. I'm still calling mine a GTV it was a GT, still has a Hypercore, Control & Battery Boxes. Until I remove those Parts, it's still a Vesc in a GT Platform, so for me it works, for now..... DIY makes sense, but it is also too broad of a statement same as Vesc, you have to follow up with one wheeled balance skateboard, and that doesn't roll of the tongue either. Damn this naming thing is Hard, Onewheel is too good of a name.
Another great one guys. What I want to know, will the Canon Core Motor go into or onto, current WTF rails. . . because for me, yowza....or, maybe, Robert and Jeff could, I dunno, start swapping parts to get. . . a lighter, Canon Core Mashup!!! Future is bright, gonna have to wear Bodhi Shades™...
Is this the Goatwheel! 🐐
Go Floatwheel 💯🤙
Mind blown so mant times, but dayum that takeoff at 1:23!
Very awesome video! Deff makes me interested in looking into a floatwheel.. currently riding a OW Pint. Was considering GT or XR.. but the ADV looks great!
My pint s comes in today. So excited. Probs gonna use it for a couple years, sell it and put it towards a floatwheel. Breaking $2k at once on a first board just felt awful. But def gonna ditch fm in the future for a floatwheel after my pint s!
dope tricks Jesse! very impressive for a first session on a floatwheel. But hey please change that tune for tricks. You gotta tame that thing. make it buttery and you will love it
Which rim-savers fit the adv? The xr ones?
yes
Yes
I’ve never been to cali but I feel like I know my way around Sacramento. Throw some old float plates over that brittle plastic until the new formula shows up.
Thanks for posting!! Hey, questions, please 🙏🏼…
I’m trying to decide between ADV(molicell battery) and ADVpro~ besides appearance and height adjustment design, is there any real difference between them and the ride feel of the boards?
(..Also, if someone could kindly explain why/ under what circumstances someone might want to lower or raise the height of the board from a centered position?)
..and has the ‘tire rubbing’ issue on FW stock boards been resolved?
Thank you for any thoughts you might have on the comparison of these boards!!!
I like standard ADV because of the look
@@TheFloatLifeyea agree on the looks. Any noticeable difference in the way they ride or possible pros and cons to the designs? Thanks
The only differences are the batteries and the rails. You can order the ADV with the Pro batteries.
Yet another great video. My ADV should be shipping this week!
Would thereny way someone could do a Vesc tuning tutorial? I've watched Tony's video on the setup numerous times. That's great for the initial setup but I have yet to find a helpful video for how the tuning part works. How does one add, for instance, Jeff's tail tune vs his butter street tune? What do the settings do?
I would love y'all to the moon and back if something like this could be created. ✌️
Are there any plans to sell custom parts for adv?
WTF rails, Kush pads, etc.
This vid smacks
"Slow down my friends" haha good advice Jesse!
is the weight of the adv the same as the pro?
Is the spot that got “murdered” the site of Max’s slide around the light pole in New Normal?
Yup
Can't wait to get one
Do the larger boards have the side to side wobble like the pint does? That wobble really fatigues your legs.
Try tuning your amp limit down. Maybe like 80A or 90A. It’ll feel much more familiar to trick on
Built like a Chinese tank
How is the durability? Ive seen some reviews with the plastics being too fragile. Have they fixed this issue?
They were right out of the box, but they have all been fixed
Dude, if that plastic gets banger and he puts out some flat footpads, I will definitely get one!
I never would have thought shoves down ledges would be possible. At this rate, we're not far away from somebody doing a bigspin on a VESC.
Whatever you do DO NOT let floaty watch this video lol
What is better for the price one wheel pint on pintx 1:01 1:05 1:06
8:26 Skate-stops are sacrilegious.
10:10 Was there an attempt to bonk up the three(?) stair at the foot of the bridge?
With all that torque, does the tire wear out faster? Put some serious nobbies on there (like the Mten4 tire), and see what you can crawl up!
Better add float plates ASAP!
Just get a Curb Cover ledge cover to cover those skate stoppers ;l
where do i buy a float wheel or are they still in preorder
Start stacking crypto
@@TheFloatLife whelp I do have 2 working kidneys
letsss goo !!!! put a stunt pack in the back w/ some wtfs !! or the bodhi street rails !! moooooooorrrreeee adv floatwheel / vesc content !!!!!! maybe get a superflux motor tricked out in floaatlife mods !!!
🔥🔥🔥🔥
Nice pop shuvit. 🤟
that's his jam!
coooooooooooooool boyz! nice testing! it wanna eat features
Imagine dropping almost 2G's on a board only for it to break after a few tricks. They gotta make the design more durable.
Would you take a 40lb XR over a 40lb Floatwheel?
You can set your top erpm down so that the freespin doesn’t go a million miles an hour and it’s easier to land tricks.
Please allow float wheel to license your technology for bumpers. If it weren't for that I would be buying right now
That beard is looking nice and full!
That poor dude sitting by the lake. 😂
Floatwheel ADV pro on LOWEST setting content 🙏
The audio was a little finicky for me. I felt like talking was super quiet but everything else was too loud in comparison
The boys went out without their microphones for this session, tried some new premiere features to get it cleaned up, but its still in beta so theres still some kinks!
floatplates when? :)
And just like that both of you got uninvited to Kyle’s b-day party.
Dang it! I heard it was going to be a good one this year too 🎉 🎊 🎈
Do yo guys think Kyle Dorkerson ordered a Floatwheel? Did FM scope the comp? Get some industrial intel off of Tony?
The line at 7:10 was really satisfying
I'm interested in the ADV but I'm possibly more interested in what FM will release in the future to compete with it 👀
the price differences will still be crazy for example the gt s they just released, it’s ass. only mph difference it’s rlly dumb
How does everyone feel with what floaty Mcfly posted about how we should support floatwheel!??!? Illegal product for us?? Let’s hear some talking about it float life
What did he post and where?
Hat off to @floaty for calling a spade a spade. Illegitimate company bypassing US laws and regulations that may impact all of us that love to Onewheel. Keep this black market board out of this country!
Ok, I saw the post now. It’s total BS. Makes no sense at all. Kids, don’t do drugs (or whatever Floaty did before making that post) 😅
yeet
Great riding but still always wear a helmet guys.
What is bodie doing…rehabbing an injury.
Still not there. The torque on those bonks is way too high, the curve is there for a reason. Needs to be tuned down.
Also, wear your helmets! One bad spill and you're a different person.
Like they said, it can be tuned down! I've tried Jeff's trail tune, it's aggressive AF lol, I'm impressed it did as well as it did for tricks with that tune haha.
This will be a viable product when they fix the plastic issue and close up the gap in the motor. Until then, I'm not a buyer.
I staying with FM DONT CARE WHATS MADE
Ok 👍
This is what we call blind consumerism
Stoked to see new boards out there, would love to add a float wheel to the collection. Not sure why but I completely hate the company, it seems shady. “Tony” has got a bigger mouth than Elon musk and the Floatwheel diehards are as pretentious as Tesla owners. Innovation breeds competition which is good for everyone. I’m hopeful that Floatwheel shapes up to be a legitimate business that can fully compete, right now they’re playing catch up.
Future motion is a good company ?? Respectfully intended
@@MrDmadness hmm, with “good” being such a general term, I’m going to say yes. I think they do/have done far more good things than bad/poor things. Mind you, this is one persons view point, who is very involved in the community (self proclaimed). In fact I think it is easier to list the things I would like to see onewheel change versus the list of things that they do, that I think are good. Their customer service team feeds you line like Apple repair technicians, I think there are 5 typical responses. Onewheel uses the standard marketing verbiage like any other major company, which can be misleading if you don’t do your research. Making a proprietary tire size for their device, but doing so distastefully (why make the tire have less sidewall??). Taking forever with custom shaping (looks like it might be worth the wait). Not allowing vendors to also act as verifiable service centers. My last and biggest complaint, making the board auto wipe if the battery is disconnected.
Most of these complaints make perfect sense from a business standpoint so I don’t think they’re even that valid. Consumers and producers are always gonna want different things, the good companies are the ones that find a middle ground and I think Future motion is pretty dang close.
If you’re not sure, why you hate them, the you should maybe just rethink your opinion. Why do you think they’re shady? So far they‘ve been great. They worked their asses off to ship that amazing board and their support is the best I‘ve ever seen. They are the opposite of shady.
And only because I love my adv, it doesn’t mean I‘m like a Tesla fanboy.
Definition of shady…bypassing US laws and regulations with loopholes.
@@laurentbeauregard4666 futurd motion stole the design and then patented it. I hsve over 30,000 km riding on xr models but the cimpany us absolute garbage snd is going to get buried by vesc, which is superior in every single way. If you can name sonething fm does that vesc doesnt do better im all ears. Fm is a comlsny so willfully ignorant they tried to code lock out s tech device not realizing the age we are in. Ot tool a whole hour to make their bstter to bms locked board work with any battery... thats the level of stupid thats running future motion.
I heard they are already fixing the plastic so it doesn't crack anymore!
Check the latest video on the Floatwheel channel. It’s already fixed and much better than the old one. I hope my new plastics will come soon. The current (old) plastic won’t last much longer😅
@chairforce.1 coined it. GOATWHEEL 🐐
I think it just might be!
You don't have to fight it. #vesc