I had to drill out the threads So that they just slide onto the axle bolt. Then I had to trim the back of the pegs off where it looks like a nut. You have to trim them so that you can fit the washers and the nut on the axle. I will try to make a quick video and post it in the next couple of days.
just got my off brand Grom and it don't want to start when my gas cap is on, cause no airflow much for the gas did your bike have the same issue and if so how would i solve it?
There is a breather hose that comes off the gas tank under the plastics on the left side. . On that line there is a one way breather valve that is usually installed the wrong way causing vapor lock. Number one you can turn that little plastic valve around. Unfortunately even turned around sometimes the valve doesn't work properly. For the guys that want high performance we eliminate all the emissions. And switch to the MIKUNI VM22 carburetor. In that case you just run the breather line up towards your head tube by your handlebars, I zipped out mine lightly to the frame so that it still Breathe freely.
At least two fingers between the chain and top of the swingarm!! Good shit dude
how did you get your pro taper grips fully on mine have like a inch of room still on it
Damn how you got the foot pegs on, my stocked spring or metal piece doesn’t wanna function correctly with the same pegs as yours 🤔
I had to drill out the threads So that they just slide onto the axle bolt. Then I had to trim the back of the pegs off where it looks like a nut. You have to trim them so that you can fit the washers and the nut on the axle. I will try to make a quick video and post it in the next couple of days.
just got my off brand Grom and it don't want to start when my gas cap is on, cause no airflow much for the gas did your bike have the same issue and if so how would i solve it?
There is a breather hose that comes off the gas tank under the plastics on the left side. . On that line there is a one way breather valve that is usually installed the wrong way causing vapor lock.
Number one you can turn that little plastic valve around. Unfortunately even turned around sometimes the valve doesn't work properly.
For the guys that want high performance we eliminate all the emissions. And switch to the MIKUNI VM22 carburetor.
In that case you just run the breather line up towards your head tube by your handlebars, I zipped out mine lightly to the frame so that it still Breathe freely.
@@bikebilderbear6786 thank you might just do the same and get a mikuni carb
Thank you sir!!
got the links for your pegs?
The pegs or the frame sliders?
@@bikebilderbear6786 both
@@DailyCbr www.ebay.com/itm/385354598913?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2Xq01klKQ2O&sssrc=2349624&ssuid=PqPkoGWeSXi&var=&widget_ver=artemis&media=COPY
@@DailyCbr www.ebay.com/itm/402772744907?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=fIaJE1vpTQ-&sssrc=2349624&ssuid=PqPkoGWeSXi&var=&widget_ver=artemis&media=COPY