How to Install Rivnut Rivet Nut Nutserts WITH TOOL [Full Guide]
ฝัง
- เผยแพร่เมื่อ 13 ส.ค. 2019
- How to Install Rivnut Rivet Nut Nutserts WITH TOOL [Full Guide]. I run through the Best and Easiest Way to install Rivnut /Rivet Nut / Nutserts. It's an easy guide that show's you how Rivnut /Rivet Nut / Nutserts work, how to install them and detail on the best tool for installing them. Nice and simple guide. Buy Rivnut Tool - amzn.to/4abBbt1
💲 Buy Rivnut Tool - amzn.to/4abBbt1
DIY Tool versions:
► Version 1 - • DIY Rivnut Nutsert TOO...
► Version 2 - • DIY Install RivNut Nut...
WITH Tool version:
► • How to Install Rivnut ...
⚡️Keen to support future content?⚡️
🎁 VSMH shop - www.videoshowmehow.com
🙏Check-out channel membership, Super Chats & Super Thanks
------------------
📱 Socials
------------------
I▶ www.videoshowmehow.com
I▶ Instagram - videoshowmehow
I▶ Facebook - videoshowmehow
I▶ TikTok - videoshowmehow
-----------------------------------------------
😀 About VideoShowMeHow
-----------------------------------------------
⏩ What's with the gloves?
Not after any TH-cam fame here which is why I'm not in the vids - they're not about me they're about the how-to! I used the gloves for the first couple of projects I filmed which just happened to be messy ones and it kinda just became a thing - easy to spot my videos! If that's not your thing and you'd prefer to watch a face, all good, I won't be offended, there's plenty of better looking ones to watch already on TH-cam ;)
⏩ Where did this start?
I really enjoy tinkering with different projects - they usually require a whole bunch of research and learning along the way. It's satisfying on doing a thing and standing back and going 'Yeah! Totally did that!'. I had a bunch of mates asking 'how did you know how to do that?' and 'I couldn't never do that myself so I thought; I need to start something where I can help others that might be thinking the same thing :)
⏩ What will you find here?
The purpose is simply to make these videos as top quality and helpful as I can. They will always be free, there's ZERO agenda and the only motive is to try and upload what I would want to watch to help with that particular project. I'm also keen to keep building this little community and will try to answer all questions when asked - fire away :)
#videoshowmehow #rivnut #nutsert #rivetnut
#videoshowmehow #rivnut #nutsert #rivetnut
Disclaimer:
If you click any of the product links above and end up purchasing anything I get paid a small commission (not charged to you). This is one of the ways you can support the channel :)
VideoShowMeHow assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not VideoShowMeHow. VideoShowMeHow cannot guarantee against improper use or unauthorised modifications of this information. - แนวปฏิบัติและการใช้ชีวิต
![DIY RivNut with a DRILL? | How To Nutsert Rivet Nut DIY [without tool]](http://i.ytimg.com/vi/u4huFzeQIgw/mqdefault.jpg)
![SOMETHING WE ALL SHOULD HAVE! | RIVET NUT INSTALL | #OMGMIATA | EP39 | [4K60]](/img/n.gif)
CHECKOUT ALL RIVNUT NUTSERT VIDEOS HERE -> th-cam.com/play/PLloptHW8MGGjPmV5K66VACn_By5rBMqyi.html
Thanks!! I replied to the 3rd video of yours on rivnuts.. I don't think I'll be able to use the tool.. Your videos on how to use wrenches will probably work better for me. I don't have much arm strength to squeeze the tool. Not to mention there's not much room to get the tool in where I need to put the rivnut in.
Nut cert
Thank you
Took me 4 videos to find someone telling me how to attach the Rivnut, expand the handle. Then snug up the Rivnut again. Thank you, up to that point 4 tries failed. Thanks again!
i hate saying this for every tool i've ever purchased but i didn't know i needed one of these tools till now.
Yeah they work well 😊
Right you are.
Everyone calls me a tool horder until they need to borrow my tools.
🤣
U might need a platano peeler
Man, it’s videos like these that make my day! Just perfect and knowing how it works helps me honestly
👍
My new favorite construction technology.
As I've gotten older and learned more and more about construction I have began to really appreciate the innovative ways people have developed to overcome difficult situations or just simply bring things together in a flush and clean way
One commenter asked how you know how much stroke to use and you replied that you use a two-step process to not overdo it, which is fine. The tool I received came with pretty understandable instructions and a chart that lets you determine based on rivnut size and thickness of the metal you have, how much travel you should look for using the gauge in millimeters of travel. This allows you to get the right amount of "crush" without underdoing it (spinning rivnuts) or overdoing it and possibly breaking the mandrel/die.
You'll use this tool more than you think. Suggestion - do a test insert on a scrap piece so you can see how much pull is needed to set the insert. Especially on smaller sizes. Otherwise you can snap the mandrel with too much pull. You never pull handles enough to touch each other.
I've recently started a project that calls for rivet nutserts. I bought the tool on Amazon and had no idea how to use it. I'm sure I could've figured it out but thanks to watching your video I didn't have to. Very informative...thank you 👍
Annoying music, but a very good educational video.
Thanks
I thought the same thing, hamidbazmi7948, but the music stops at about the 1-minute mark.
I have been searching youtube for a straightforward video. Thank you very much from a non mechanical newbie to dyi projects.
You have given me a great alternative. I have issues riveting my tonneau cover as they slip out after some time. I will definitely get to work on it. Thank you very much. I can just imagine how much effort you've put in this video to get it just right. 👍
Nice!!
Extremely helpful... my neighbor loaned me Stanley threadserts along with the tool. There seem to be no videos on TH-cam describing that specific hardware and tools... but this video was close enough I was easily able to figure things out. Thanks so much!
Super interesting! I thought I could just install These blind nuts using a mallet, but after seeing you squish the thing I see why I would want a tool.
Thank you!
With geriatricism slowly approaching a great video is worth a thousand words in small print. Thank You. 🙌🏽
I didn't even know this existed!!!! 😱 Been looking for something like this for years!!! Even hardware stores didn't know what I was talking about when I tried to explain what I wanted. They'd say "I think you just invented something cause I don't know what the heck you're describing. 😐"
This is the best demo on TH-cam dude. Extremely well done 👍
Thanks for the comment! I put hours and hours into these vids (most are around 30 hours total) to try and make them the best I can, hopefully they're improving 🤣 Anyway, cheers mate 👍
Excellent video, thanks for that. The turny twisty thingy that releases the bolt was cool as well, I couldn't work out how to get the tool off one the nutsert was in.
Project- I'm remounting the hatch/cover for a water tank on a narrow boat (UK)- it had bots welded underneath the plate, but they have corroded and half have disappeared. So I'm going to grind off what rests & use nutserts instead.
Thanks for posting,my Chinese is a little rusty as far as reading the instructions.This video made it much simpler.
Welcome :) Merry Christmas
TEN STAR Tutorial Video!…completely easy to follow. I just ordered mine and will get it in 2 more days..thanks for the super clear tutorial…
Thank You for this video! I always wanted this tool without knowing what it was till a friend bought it. So many things to go back over and install more professionally now. It's like the Molle military nylon straps for sheet metal :D Your video was the most informative and straight forward out of the few I watched. Very helpful and gave me the confidence to put my first rivnut I ever did right in the A-pillar of my 21+ year owned truck I love dearly :) I'm mechanically capable and I'm an engineer so that helped a lot but still, ballsy but no sweat with your instructions :) Thank You again!
I just purchased the nut rivet tool ... this is just what I needed! Thank you
Thanks for the clear and simple instructions. My tool turned up with Chinese instructions! I used these to put nut certs in my van roof to bolt some roof racks on, the ones available for my van only clamp to the edge of the roof and I didn’t feel they would be safe and would worry they’d come loose! This video helped me out big time!
Glad it helped!
@@VideoShowMeHow roughly knew how to use it but I didn’t want to cock it up especially with drilling holes in my roof!
@@Legend-wu7pj How did you know you'd have clearance on the inside for the rivnut?
Great video! Im about to be a first time rivnut user to add a rear diffuser on my car. I have confidence going in now
Thank for the tips. I just installed a new radiator and electric fans in a 40year old truck.
Thanks Mate, nice demo. I've been thinking of ways to fasten square/rectangle tubing to mount my fridge slide and drawers in my ute canopy. Lo and behold your vid pops into my suggested feed. I want to diy and have never welded. I reckon a new little tool purchase is on the cards...
Welcome. If you're doing a few the tool can't be beat 👍 Have a demo of it in the Rivnut playlist on the channel 😃
Thank you this helped a lot I’ll be using this to install my wide body kit on my E46
Nice!
I’m also using this for a wide body kit on my 86
I just found this video for fender flares on my STI lol 😂
I'm fixing a real parcel shelf on my E46. Previous owner cut the middle section out for a messed up looking speaker shelf. Trying to get it back to oem look and keep trunk sound out. I have everything done, now time for the threaded insert. But, I don't want the insert to spin. And so I don't know if I need a specific type of insert made of Aluminum Brass or Steel?
On TH-cam to hopefully find what insert type can I use so I can torque to bolt to roughly 10ft/lbs without spinning it on this sheet metal?
Thank you
Previous owner of my classic mini used self tappers for the arches... I'm also here for upgrades. These nutserts will definitely cope with 10 ft/lbs, use a steel one but only if you buy the beefier rivet tool like this one shown (steel rivnuts + the one handed tool will be a bad time)
Awesome tutorial clip on rivet tool....I just got one and wasn't sure how to use it....until now.
I'm glad I saw this. I will be using the bolts as balancing feet for my old white gas camping stove.
Nice!
Thanks for tutorial.
Just got mine and going to use it to put foldable legs on my keg spit. 👍
I picked up the same kit the other day, great value! We should make a challenge to see who can legitimately use all of the inserts first haha....
Haha that's a whole lota rivnuts!
I have one of the same kit you have. It works fantastic!
Thank you Thank you Thank you!!!! The one I purchased on, Amazon did not come with any instructions, but was very similar to the one that you used. And your simple demonstration was very helpful!!!
Glad it helped! 👍
I just got mine from eBay and was looking for a video
Many thanks....
An excellent instructional video! Thank you!
Thank you for the video. The tool you have is the identical tool I have. Because you took the time to make this video I now know how to correctly use it!!
Great, this was exactly what I was looking for, thumbs up!
Great video! Just a note, rivnuts can be used on rounded surfaces, such as tube with no issue.
Great video! I wanted to learn about these cause we use these on all the body panels of the excavators I do engineering work on. Thank you!
Beautiful.. will be doing this tommorrow at work.. thanks dude! 😁👍🏻
Thanks a whole lot. Your instructions are very detailed and informative. Thank you.
Thank you. I was going to get one and would not have gotten a longer handled one.
Welcome 🤘
nice. will be needing to use this same version to install nutserts for a deck bed on my Jeep Gladiator!
Gladiator **droool**
Nurserts for decking?
This video is exactly what I was looking for! Well done, great video!
Great video. 1st time needing to use rivet nut install tool.
Perfect Demo
The previous owner of my Raptor 700 was apparently a fan of doing wheelies.
I've got one nutsert missing and another loose for the rear grab bar mount.
This has been super helpful. Thank you.
Thank you for the information. VERY helpful. Stay safe.
Cheers Tim!
Great video. In your demo you showed underneath the metal a visual of how you know when you've locked it down enough. How can you tell if you cannot see underneath your surface? How would I know when to stop riveting it down?
You can feel it get much harder to press/turn when installing 👍
Very well done! Thank you for this! Time to go to work!
You teache very well, I did kow this tool exited !
Cheers :)
Right on thank you!
Probably the best video on TH-cam, showing how to install Rivnuts!! The only thing I would add; the small one hand install tool is great for the smaller sized Rivnuts, where all that torque isn't required. You can use the large tool, that you did, for all sizes, *if you're careful. Its very easy to break the smaller mandrel or dies with all that leverage.
Top tip and thank you for the feedback :) 👍
Can these be used for plastic ATV panels
@@matthewgriffin8049 I've used on plastic before so can't see why not, so long as the surface is flat (ish)
Hi,can you cut the excess material of to make it flush?
Needed this for installing some new speakers in my daughters car
I have that exact same tool. It came in a very nice case. Major problem: Too much money was spent on the case they couldn't afford the paperwork to show how to use the tool. You did a good job on filling that shortcoming. What is the purpose of the yellow scale on the tool?
Basically a depth gauge, shows how far the nut is crushed. Unsure how accurate etc, personally I don't really use
Thanks buddy very helpful tutorials
Cheers!
Great video, and thank you for a well planned and thoroughly informative instruction. 😊
i might suggest that you talk about dissimiliar metal issues and also how to make the connection water tight.. this is a very popular connector in the playground business and as such i have made my mistakes,,, like cross threading a bolt causing the rivnut to hopelessly spin... and how to remedy such a situation... It is a great teaching video !
I got the gun version bc it’s easier to use in cramped spaces this really helped out thanks👌🏻
Cheers mate very helpful 👍🏻
Regards from Scotland 🏴
Cheers 👍
Great video! The music was excruciating at times though. Cheers
Awesome video, thank you
👌
Bet is the neatest tool no one knew of 🤓💯💖✨🎊🎉🎊
Thanks for the video!
What is the scale for? It has graduations for some sort of measurement.
Also if your installing them into a blind hole howndo you know if you squeezed it enough? Too much and you will break the die.
Thank you for your video it is very helpful
Thanks mate cheers!
Nice video, clear explanation...subbed.
Thanks mate, glad it was helpful 👍
I did not know this tool existed before this video, and I wish I had. I could have used this on countless projects. What is the thinnest gauge metal these would work with? Would it work with HDF (hardboard) panel?
I was hoping you would touch on yow to adjust the plunge/stroke depth on this tool. Thats what the little gauge on the bottom is for. Its possible to damage the rivet nuts themselves if you dont have this setup properly and you pull beyond the crush capacity of the inserted riv nut thereby essentially rendering that installed nut useless bc the threads have been destroyed
Yes you're correct, I usually just tread right down with the tool at max open, then insert full close, open 1/2 twist, compress again and perfect every time 👍 If you go too far it pulls the whole cylinder out of whack to the point you can't thread anything as you say
Awesome Video !!!! I will buy this tool, I have some shelves to do in my Work Van!!!! (y)
Very helpful. Thanks!
hi! thank you so much for the video. i have a question.
ive been using rivet nuts for light duty applications, say like mounting the number plate , or a hinge.
but, can i use this for heavy duty industrial applications, like say to attach legs for a table that takes 1000kgs on it. where i would put the screw horizontally, and the screw is loaded in the shear mode.
Great video very helpful thanks
All the other nut riveter videos on TH-cam are complete shit compared to this video! It’s very clear instructions and thorough. You touched on every point dealing with the use of this tool! A+++!
Ah thanks mate 🤘👍 I try to make it comprehensive without being over the top I tend to waffle haha
Thanks ... great demo!
Helpful video, bit long to get to the good stuff but helpful
Cheers mate
Thanks for this Video!
Great video! Thank you!
Thanks well presented video..
Great video man !!
Que bacana, valeu demais
Thanks.
Great review 🤙
Brilliant, thankyou
👌👌
Hope you get to a million subs so i can say i was here b4 fore you hit 1k! lol
Thanks mate lol 😁👌
Nice and I formative video with good explanation
can this system be used with washers when securing to plastic?
Thank you.
Thanks mate 👍🏿
Thank you,super!!!
Thank you!
After I saw your video, I bought a rivetnut tool, yato brand, it haven't arrive yet, but I was wondering how thick or thin should be the sheet plate in order to insert a rivet nut properly? I suppose it can't be too thick/thin. What do you think? Thanks.
It really depends on the application and rivnuts themselves. I've used on a couple mm to 5-6 mm
I know that this is old, and I haven't read all the comments, but the Rivnut is for blind area's. Where you can't see the installation.
You have to develop a 'feel' for setting the Insert
I needed to drill out a hole on my jeep fender to install one of these inserts for an arb twin air compressor. Someone used this tool in stead an I assume put in the wrong size insert. It was not the one supplied by arb. So after putting in the screw he also supplied, it screwed in maybe a quarter of the way and the insert turned with the screw. I could get the screw out as everything turns together. I dremeled the head off the screw so I could uninstall the compressor bracket. How do I remove the insert and the headless screw?
How about describing the feeling of how you know when the rivet nut is tight enough. Very rarely do we have the opportunity to see the other side to look at the back of the rivet nut. I was just doing this and for some reason I had to keep on tightening the “handily turntable thing“ that you were talking about for the rivet nut to grab. How about explaining that; where it’s supposed to be at the start of the operation.
Will this work on fibre glass sheets? And how do you know when to stop pulling? Thanks
Thanks
Rivnuts do work on curved surfaces, have a look at any bicycle, they are used for accessories like drink bottle holders. Good explanation however I just used two M6 rivnuts on my bike after watching.
will a rivnut hold as well as a nut and washer would? I'm concerned about the rivnut popping out in a high stress attachment
Thanks for the tip. Would this work for a boat?
Good video, very informative
what is the thickest metal one of these will work