Ciao Daniele, tutte valide e veramente a costo zero, ma lo spellafili è diabolico! veramente ottimo! più semplice di tutti quelli in commercio e più sicuro di un coltello sguainacavi senza contare che con le forbici da elettricista se non hai la mano spesso si tagliano dei trefoli! ciao e ai prossimi video
Grazie Zola, il taglierino l' ho creato li per li, non avevo un' idea ben definita, mi è venuta mano a mano che lo costruivo visto che, se lo dovessi rifare adesso, lo farei molto più funzionale.
@@DanieleTartaglia beh posso dirti che è veramente un bomba così... se magari hai voglia di fare un upgrade sarei curioso ci vedere cosa ci aggiungi, ciao
Davvero belle idee originali, bravo e bel lavoro. Con il bullone forato ho avuto un bel flashback tra i miei ricordi felici. Un caro saluto. Ciao Daniele
I think your definitions of simple and no cost are completely different from mine. For one thing, with the cost of all the tools and hardware needed to make these DIY tools, is it really that out of reach to just buy the actual tools needed to perform those functions? That being said, I do admire your ingenuity.
The first 2 are real life hack if you ever done those work. They need special tool to be done, but screw and wrench are way too common, so if you're not a worker who already have those tool lie around, you don't have to buy those tool just to work it out on some hole in your house. And yea, it'll definitely save you some bud if you buy those tool just for 1 time use.
Top top top.... Amazing.. Thank you Super si, najvise mi se svidjaju stvari oko lemljenja, fluksa i sl. Lemilica T80, tinol zica.. Pratim te doveka. Hvala ti.
Ehi Daniele, buongiorno. Mi è piaciuto molto il tuo tagliafili / spelafili. Che idea assolutamente geniale. Grazie compagno. Dall'Australia. Ciao... :)
il rivetto filettato funziona anche in un foro cieco, ovvero ha una buona tenuta, riempie uun foro poco largo all'estremita? ci sn anche misure piu lunghe, tipo da 1 cm o circa? grz
@@DanieleTartaglia Qualcuno, l'ho preso anch'io, e sembrava strano, poi, ho un piccolo canaluccio, ci può stare... Vuoldire, che facciamo qualcosa meglio di loro, lasciamoli rosicare... Buona serata... Ottimo lavoro, comunque!
The cable stripper is really great. I will make my own later. Thanks a lot. Your work is always precise. Keep safe in Italia. Are you living in Italia?
For me this cable stripper seems useless. I do same cable stripping with usual knife with trapezoidal blades. Same result, and faster. But I really like his ideas with rivets. Rivet guns are quite expensive, and if you need to install just few rivets this devices can really help you.
I would like to disagree. The cable stripper works similar to some "professional" tools I own, and should work fine and keep your fingers safe (and also look better than my tools). The rivet tools, on the other hand, seem to work but are really slow. I own a couple of rivet guns, and normal rivets as well as rivet nuts only take a couple of seconds to mount using them. And they are not really expensive, for 20 to 50 bucks you can get some decent ones that save you a lot of time if you use rivets more often. If they save me a few hours of work, they've paid themselves off.
Sorry, I am not familiar with rivet guns since I have not used it before. But for wire stripper, I have used some professional ones. It is really good of course. But for doing the thing in a different way, especially do it use your hand made tools it gives you some sense of accomplishment. Otherwise the invention channel in TH-cam has no meaning existence. His work always precise even from small things. I like his work very much. Also I will Hacker his work in a different way. In fact, recently I have done one of them. Just begin. I am shamed my rough work compare with his fine art masterpiece. You can check here if you want to say no again. Thanks. th-cam.com/video/nTv8POgD8Fo/w-d-xo.html @@wernerviehhauser94
@michel777ification factory-made knife looks worse than this device? Hmm, interesting thought... Not agree! And if it you can not control the depth of cutting, maybe you just need more practice. Of course, I know about special tools "cable strippers". Yes, I use them when working in workshop. But, for portable use I prefer small and multifunctional tools which I carry in a small bag with me.
Bro. You are geneous. It's excellent, superb idea. Its a innovative & very useful tool. I appreciate your brilliance. Wish you all the very best for the future projects.
Seguo tutti i tuoi lavori con estremo piacere, bravo Daniele! P.s.: l'ultimo lo farò anche io 😊 non tanto per i cavi di piccola sezione, io lavoro spesso con cavi più grandi
You really didn´t get it. I think he has more tools than a hardware store. He just give you examples to save money and build such tools the easy way. Stupid idiot!
All very good ideas and yes the last was the best, Excellent!! May I suggest a slight change to the stripper/cutter, I would extend the blade so it was exposed at the end, then blunt the tip and possibly tape the top. Now you have a save pressure point to press the blade with. Of course my suggestion may be useless🗑
Threaded rivetting is ok, wire cutter ok but for simple rivetting , buy a manual rivetting plyer....it will be easier than buying a drill press for making a fine hole in a bolt....!!! lol...Excellent work ideas though..
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
Ciao Daniele,
tutte valide e veramente a costo zero, ma lo spellafili è diabolico!
veramente ottimo! più semplice di tutti quelli in commercio e più sicuro di un coltello sguainacavi
senza contare che con le forbici da elettricista se non hai la mano spesso si tagliano dei trefoli!
ciao e ai prossimi video
Grazie Zola, il taglierino l' ho creato li per li, non avevo un' idea ben definita, mi è venuta mano a mano che lo costruivo visto che, se lo dovessi rifare adesso, lo farei molto più funzionale.
@@DanieleTartaglia beh posso dirti che è veramente un bomba così... se magari hai voglia di fare un upgrade sarei curioso ci vedere cosa ci aggiungi, ciao
Fatti! Bravo siamo compatibili....
Queste idee sono OTTIME, FAVOLOSE!!!!👍👍👍👍👍
Grande Daniele sei il numero 1
Davvero belle idee originali, bravo e bel lavoro. Con il bullone forato ho avuto un bel flashback tra i miei ricordi felici. Un caro saluto. Ciao Daniele
Ti ringrazio :-)
All of them are the best but third is super
Muy..pero muy ingenioso. Gracias por compartirlo. Saludos de Uruguay🇺🇾 Roberto...un viejo apasionado de la mecánica y las motos.
I think your definitions of simple and no cost are completely different from mine. For one thing, with the cost of all the tools and hardware needed to make these DIY tools, is it really that out of reach to just buy the actual tools needed to perform those functions? That being said, I do admire your ingenuity.
The first 2 are real life hack if you ever done those work. They need special tool to be done, but screw and wrench are way too common, so if you're not a worker who already have those tool lie around, you don't have to buy those tool just to work it out on some hole in your house. And yea, it'll definitely save you some bud if you buy those tool just for 1 time use.
@@justalonglivednoob all
I agree. Not all DIY; in fact, about 90% are being done with all modern tools. In any case, the efforts and ideas are appreciated.
Excellent Danielle
Ottime soluzioni ! Grazie Daniele ....
Muchas gracias desde Nicaragua
3 simple easy to make useful items. The best video like this I've seen for ages, thank you.
The last tool is very good, i think i will try to do something identical👍
Just use pliers.
Super ❤
This is brilian idea, good job
Hi!! Very good tool!, Congratulations, Carlos Alberto from Brazil
BRAVO PRIJATELJU.
Bellissimo lavoro!
Idee semplici e buone.
Congratulazioni!
Super Video.Danke!
La mas inspiradora pagina. Saludos desde Panamá Big Fans.
Un clásico , no nos deja de sorprender... muy interesante vídeo , sin comentarios....
Muchas gracias por el video
thanks for the video
isolation removal tool is fantastic !
All 3 tools are good.
The last solution to tricky .. better use cutter blade directly .. for no 1 and 2 I agree good solution.. thanks for share
Good ideas 👍
I watch you from Iraq ❤️ You are awesome keep going ❤️
Creatività e precisione. Davvero molto bravo
Merci pour vos nouvelles astuces. Bonne continuation et à très bientôt.
Wow like my friend 👍
Bravo!
Great tools.thank you so mutch...
Top top top....
Amazing..
Thank you
Super si, najvise mi se svidjaju stvari oko lemljenja, fluksa i sl.
Lemilica T80, tinol zica..
Pratim te doveka.
Hvala ti.
nice video
Cool ideas keep them up
Good shearing tutorial 🙏🙏
Last idea was impressive.
Very smart daniel 👍🏻
Super
WoW grande!!! Bellissimo lo spelafili, meglio di quelli in commercio!
The last one is quite useful
Bellissimo, continua così.. sei il numero 1 in the world.
Simplemente, sensacional, felicitaciones por tu canal
Nice creative ideas
Super idea sir
Top job come sempre; utili e raffinati. Grazie.
Ehi Daniele, buongiorno. Mi è piaciuto molto il tuo tagliafili / spelafili. Che idea assolutamente geniale. Grazie compagno. Dall'Australia. Ciao... :)
Super Einfälle meinen Respekt!!! Weiter so 👍 💪 🇩🇪
Good my dude
Awesome IDEAS !!! 😎👍🏻👍🏻👍🏻
The best one...
love it
Great 👍
Grazie per queste tuo vídeo.
The last is awesome
super cool
Very good...👍
bravissimo come sempre!!
il rivetto filettato funziona anche in un foro cieco, ovvero ha una buona tenuta, riempie uun foro poco largo all'estremita? ci sn anche misure piu lunghe, tipo da 1 cm o circa? grz
che bell'invenzione quella dello spella cavi!
Great job, good job, see you all
Nice tools
great!
Ножик для снятия изоляции очень понравился!
Useful! Your genius is my favorite subscription. Allen, U.S.A.
gercekten süper yetenek ve beceri takdir ediyorum
👏👏👏👏👏👏 cool idea
Fantastico amico, non capisco che gusto ci trovano a mettere i Dislike, non li meriti!
Lasciali mettere, si vede che qualcosa non gli è piaciuto :-) Problemi loro, io non ci faccio caso.
@@DanieleTartaglia Qualcuno, l'ho preso anch'io, e sembrava strano, poi, ho un piccolo canaluccio, ci può stare... Vuoldire, che facciamo qualcosa meglio di loro, lasciamoli rosicare... Buona serata... Ottimo lavoro, comunque!
Excellent photography
Ciao Daniele, very good this projects!😉
Great video. Thanks
What was that first thing called? A nut sert or something? Where do you buy those?
The cable stripper is really great. I will make my own later. Thanks a lot. Your work is always precise.
Keep safe in Italia. Are you living in Italia?
For me this cable stripper seems useless. I do same cable stripping with usual knife with trapezoidal blades. Same result, and faster. But I really like his ideas with rivets. Rivet guns are quite expensive, and if you need to install just few rivets this devices can really help you.
I would like to disagree. The cable stripper works similar to some "professional" tools I own, and should work fine and keep your fingers safe (and also look better than my tools). The rivet tools, on the other hand, seem to work but are really slow. I own a couple of rivet guns, and normal rivets as well as rivet nuts only take a couple of seconds to mount using them. And they are not really expensive, for 20 to 50 bucks you can get some decent ones that save you a lot of time if you use rivets more often. If they save me a few hours of work, they've paid themselves off.
Sorry, I am not familiar with rivet guns since I have not used it before. But for wire stripper, I have used some professional ones. It is really good of course. But for doing the thing in a different way, especially do it use your hand made tools it gives you some sense of accomplishment. Otherwise the invention channel in TH-cam has no meaning existence. His work always precise even from small things. I like his work very much. Also I will Hacker his work in a different way. In fact, recently I have done one of them. Just begin. I am shamed my rough work compare with his fine art masterpiece. You can check here if you want to say no again. Thanks. th-cam.com/video/nTv8POgD8Fo/w-d-xo.html @@wernerviehhauser94
@@TubeUnderdeveloped interesting idea!
@michel777ification factory-made knife looks worse than this device? Hmm, interesting thought... Not agree! And if it you can not control the depth of cutting, maybe you just need more practice. Of course, I know about special tools "cable strippers". Yes, I use them when working in workshop. But, for portable use I prefer small and multifunctional tools which I carry in a small bag with me.
excelente..
Grande, che percorso scolastico bisogna fare per fare questo?
Quello che fa lui non lo insegna nessuna scuola, è un dono che se lo hai sei molto fortunato...
Very admiring!!! Really appreciate your hard work... 👍🏻
Tronçonneuse télescopique
Bro. You are geneous. It's excellent, superb idea. Its a innovative & very useful tool. I appreciate your brilliance. Wish you all the very best for the future projects.
Maestro.
Sempre originali
awesome bro 👍👌
wow
Ingenious talented and very creative, great video Thank you for teaching.
el rivet se ve que no es tan duro, de que material es o como se pide, hay de varios materiales y cual usaste? Gracias
The third diy it’s a great idea 👍🏼
Seguo tutti i tuoi lavori con estremo piacere, bravo Daniele!
P.s.: l'ultimo lo farò anche io 😊 non tanto per i cavi di piccola sezione, io lavoro spesso con cavi più grandi
Infatti, ne voglio fare uno più avanti anche per quelli :-) grazie comunque
Superp video
clever and imaginative. great video.
all 3 are super , pls change topic to revetting for simplified youtube search
Mitooooo
Very helpfull idea thnx Daniele
Market lonch 👌
Really? Do have all these tools but not revit clamp or wire stripper? WOW man
You really didn´t get it. I think he has more tools than a hardware store. He just give you examples to save money and build such tools the easy way. Stupid idiot!
Grande
All very good ideas and yes the last was the best, Excellent!!
May I suggest a slight change to the stripper/cutter, I would extend the blade so it was exposed at the end, then blunt the tip and possibly tape the top.
Now you have a save pressure point to press the blade with.
Of course my suggestion may be useless🗑
This is awesome n helpful ..thankz for sharing this bro ✌😊
Woooow, thanks dude for sharing this video with us, and the last idea is the greatest, thank you again.
👍👍👍
Can you make a video on how to make Honey Comb design Grill on Acrylic without using CNC Machine?
Top demais suas ideias
Hello, can you tell me, what is the diameter at the top (flat part) at 12.4 mm countersink drill bit ??? Thank you ...
Threaded rivetting is ok, wire cutter ok but for simple rivetting , buy a manual rivetting plyer....it will be easier than buying a drill press for making a fine hole in a bolt....!!! lol...Excellent work ideas though..
un cosa da incredere ,un cortello da mondo