I need a new motherboard! My MSI A620M-E Motherboard doesn't allow CPU Overclocking! 😔 Excellent video, sir! I guess I need to try and come up with the money to get better MOBO's!
You truly inspired me to plunge into CPU Mining. I was sorta afraid because I didn't understand how to Overclock it, but you give me confidence. Your Discord is awesome, by the way! I'm trying my hand at mining Qubic at the moment! Just started last night! Any other recommendations? The hashrate on Zephyr is too high right now currently. The yield is quite low.
@TreyHiers94 never get A series mobos for mining. They're barebones and ment for the more entry level cpus. You can find b650s for about $100 USD with an 8pin cpu connector
Maybe it's different at these power levels, or on these newer cpus, but on zen 2 I found that setting a fixed vcore (0.86V) and multiplier (28) allowed for substantially higher efficiency on randomx.
Mining is a hobby, CPU tuning is your forte Sir. Thanks Rabid! You have now inspired me to finally go put a test station next to my miners, and not have it in the other room.
Hello, well thats not exactly how LLC works but its a good video still! thanks for sharing your results! Compare with the 7950x how much hash did you get?
I have a 7900x3d with msi b650 mortar mobo. I cannot find eco mode but set up power to 65watts. On 45 watts limit too much. Pbo curve cannot past more than -15 not the best chip i have i guess.
Good video, keep them coming. Would or have you ever come across this kind of error - cannot flash modified new bios because of this error message - could not communicate with the HECI. Bios protection changed to Unlocked in bios. tnx
@@RabidMining it didn’t end up working out so great for me. I’m on MSI mobos and it’s a bit harder to get eco mode going I think. My 7950x started out at 300W, plus I had a 4060 going in it and that automatically triggered the internal GPU in hive for another 50W. I ended up moving the 4060 to another rig and was able to just isolate the CPU at 47.00 ratio / 1.0V @ 165W and 20.9 kh. I think that’s the best I can do… it’s stable
Thanks for youre gued Rabid, fantastic! Helped me a lot building my first CPU riggs. I doing two identical once based on "Ryzen 9 7950x" and "Gigabyte B650M D3HP AX" but I get some strange power readings, Both are mining 124 it/s, but one is pulling 50 watts at the wall and the other 120 watts. I get the same it/s registered at the pool. But how can one just pull 50 watts? Temp is 74 and 79. Well, they are up and mining, thank you!
Same for me too Then windows 11 do a Automatic Repair 🤣🤣🤣 as it was stuck on POST i manually turn it off My bios is latest F24c Gigabyte x670e Aorus Master
Hope This Helps You Get More hashs!!
I need a new motherboard! My MSI A620M-E Motherboard doesn't allow CPU Overclocking! 😔 Excellent video, sir! I guess I need to try and come up with the money to get better MOBO's!
You truly inspired me to plunge into CPU Mining. I was sorta afraid because I didn't understand how to Overclock it, but you give me confidence. Your Discord is awesome, by the way! I'm trying my hand at mining Qubic at the moment! Just started last night! Any other recommendations? The hashrate on Zephyr is too high right now currently. The yield is quite low.
Hang in there and hope luck is on your side
@TreyHiers94 never get A series mobos for mining. They're barebones and ment for the more entry level cpus. You can find b650s for about $100 USD with an 8pin cpu connector
@TreyHiers94 the 7950x3d can not be manually overclocked. You have to use curve optimization
Maybe it's different at these power levels, or on these newer cpus, but on zen 2 I found that setting a fixed vcore (0.86V) and multiplier (28) allowed for substantially higher efficiency on randomx.
Mining is a hobby, CPU tuning is your forte Sir. Thanks Rabid!
You have now inspired me to finally go put a test station next to my miners, and not have it in the other room.
Thank you! This bought me +2kh while reducing power. Looking forward to more videos like this.
Nice!!
Bro amazing how does idle your CPU stays 29 degrees mine on idle or on BIOS is over 38 - 40
Yeah i do have LT720 360mm AIO Deepcool
You ask and Rabid delivers!
I get even further to -45. But it has another trick. Also memory overclocking affects a lot on randomx algo.
Great job Rabid!
I can't find on my Asus b650 pro art " xmp\expo high bandwidth support"😢
Excellent as always! I have an msi b650m-p I don't have eco mode.
Is it under OC - Config TDP - 65w ?
consumption before and after?
Zeph 20kh 145w to 22kh 144w qubic 140 it/s 144w to 140it/s 144w still
Ty ;-)
@@RabidMining what the CPU is that in the video?
thanks Rabid! great video
Glad you liked it!
@@RabidMining what CPU is that ?
If you don't recommend using beta is it ok to run beta on hive? I like to see my cpu temp
Beta bios but yes beta hive is fine I use it
"G.SKILL DDR5 PC5-48000 CL30 FLARE X5 J CL30-38-38-96, would there be a difference when using this product?"
48000 guessing 4800? Is a bit slower
Do you have any tweaks for the AMD SP3 cpus? Im setting up a EPYC 7551 server to use for mining and figured i would ask for some tips.
7551 isn't very good for mining it lacks the L3 cache like intel cpus
I wish you can do the same for MSI Motherboard. Should have watch your video first before getting that
Ya never tried any of them
Always thank you for the great videos. Is there a difference in hash rate between Windows 11 and HiveOS?"
Hive usually gets more hash as windows has displays open
@@RabidMining Thank you for your reply~^^
Have a happy day~
Hello, well thats not exactly how LLC works but its a good video still! thanks for sharing your results! Compare with the 7950x how much hash did you get?
Did u ever try these settings on 7950x?
Not yet is on the list
I am unable to use -20 all cores .. due to bsod issues . do I have to enable any other other than PBO ?
Can try to change the load line calibration
Nice Tweak info video.
Are you running Qubic & Zephyr mining on the same rig with 140 w/h wall?
On qubic right now
Hello, does the GIGABYTE B650M DS3H mother with 8-pin CPU power have any problems with the Ryzen 9?
Nope runs great
I have a 7900x3d with msi b650 mortar mobo. I cannot find eco mode but set up power to 65watts. On 45 watts limit too much. Pbo curve cannot past more than -15 not the best chip i have i guess.
Good video, keep them coming. Would or have you ever come across this kind of error - cannot flash modified new bios because of this error message - could not communicate with the HECI. Bios protection changed to Unlocked in bios. tnx
Hmm not sure
My R9 7950X3D, X670E Steellegend updated bios, 32Gb DDR5 6400 C32, using ECO mode -20 Curve all cores , hits only 120it/s EPOCH 102, dont know why...
High bandwidth on?
@@RabidMining memory set XMP @ 6400mhz c32 1:1 , cpu fclk 2000mhz
I went from 120 its @155W to 125 its @250W. Not worth it for my hardware I guess lol (7950X)
go 7950x or 7950x3d for 2-3 year ?
Both are great
@@RabidMining which CPU were you using in the video
@@officialyashvirgaming rewatch the first 5 seconds
How do I leverage amd ryzen master to tweak 7950x?
Set the core and volts with it in manual mode
@RabidMining thank you R.M.
I don’t have the option for negative curve with my 7900x3d 😢
:( on the latest bios? What MB?
I’ll have to check bios version. The MB is a Gigabyte A620M S2H
Probably my own fault if it’s the MB. Built my first cpu rig watching your vids and that was one of the cheapest mb I came across 🤷♂️
Does this change cpu mhz?
Ya think so
I got Ultra Extreme 😅 for my board turbo then extreme then Ultra Extreme 😅
X670e aorus master f24c bios
-40 stuck on post
It posted on -20
Thanks 🙏
You’re welcome 😊
Amazing! Gonna try this on my 7950x!!
Let me know how it goes
@@RabidMining it didn’t end up working out so great for me. I’m on MSI mobos and it’s a bit harder to get eco mode going I think. My 7950x started out at 300W, plus I had a 4060 going in it and that automatically triggered the internal GPU in hive for another 50W.
I ended up moving the 4060 to another rig and was able to just isolate the CPU at 47.00 ratio / 1.0V @ 165W and 20.9 kh. I think that’s the best I can do… it’s stable
Thanks for youre gued Rabid, fantastic! Helped me a lot building my first CPU riggs. I doing two identical once based on "Ryzen 9 7950x" and "Gigabyte B650M D3HP AX" but I get some strange power readings, Both are mining 124 it/s, but one is pulling 50 watts at the wall and the other 120 watts. I get the same it/s registered at the pool. But how can one just pull 50 watts? Temp is 74 and 79. Well, they are up and mining, thank you!
Not sure that's weird
I will try this settings on 7900x❤
Let me know
@@RabidMining i dropped 20 watts from the wall but i lost around 1.8kh, I'm using windows 10 ( xmrig)
Blue screen for me
Same for me too
Then windows 11 do a Automatic Repair 🤣🤣🤣 as it was stuck on POST i manually turn it off
My bios is latest F24c Gigabyte x670e Aorus Master
Mine -40 got stuck
But -20 it post booted fine
And in my case I even have TURBO, Extreme and also ULTRA EXTREME 😇😀