Yo red fire...your video helped me to completely installed my healtech gear indicator on my 2008 R1. I love the video bro, keep up the good work...I followed your instruction and was able to take my bike apart safely and put it back together without a problem...I program and reset the gear indicator just as you explained and it’s working perfectly fine 😊👌🏽
I checked out the alarm and I'm comparing it with the amazon offerings. By the way, I installed my Idea gearshift indi two days ago with your help. Thank you very much. And by the way, don't worry about the haters on here. Your vids always help. At least count yourself lucky you are not in the states with all the antif riots and looting.
Very Helpfull thank you so much for saving me the Time to search the Cables and Connectors, you should sell this Video to the Manufacturer of the Gear Indicator
This video been done awhile back ,and I like it very helpful best out of the most I've watch.i have a 2006 r6 I think it's the same concept .thank bredda"yo sound like a 🇯🇲
@@rickybritish one think I dont get fully....which wire yo seh the green wire goes to on the crack sensor the whiteish looking wire or the darker looking wire??
I also understand that you installed an alarm and a GPS tracking device system...any word on which system is best for my bike...and do you have a video on installation of the alarm system and GPS tracking device?
Rudy Brown-Vidal I am using this alarm system m.aliexpress.com/item/32850540493.html And this tracking device th-cam.com/video/EFxcIo4AxvU/w-d-xo.html .i had a video somewhere but the installation is not so hard I didn’t connect the cut off or the remote start because in Germany the bike have mobiliser and I can’t bypass it.
I used this one and it’s loud € 51,89 27％ Off | Original OEM SPY 5000m Two Way Anti-theft Motorcycle Security Alarm System With 2 LCD Transmitters Remote Engine Start a.aliexpress.com/_BOQL6g
I did everything like u said , but when I turn the bike one it just stay on L dosent change for 1 gear , i conect the on the white wire I should conect to the gray?
Hi I can't see where you connect green wire in camshaft sensor? White or grey wire can you say? I connect to white wire it is a big problem? Everything works fine
The red wire is positive you can also connect it to any power wire the battery any key on wire to the brake wire if you connect it to the battery it will stay on when the bike is off,I did one for a friend and I connected it to the brake wire so when you turn the key (key on) the brake light come on and the indicator get power.
Thx for the vid ... Ive done it excactly the same... Only thing is... It wont go past learning the 2nd gear... Tried to reset it i dont know how many times.. But it Just wont work..
I had the same problem to start with,just reset and try again it should count down from 6 to 1 when you reset and you should see a L then try to get the rave over 3000 and go up the gears
Hi, I have 05 r1, I followed the way you connected the wires but when I connect the red wire to the brown wire using the connector and turn on ignition. The gear indicator doesn't come on. Any tips on what I'm doing wrong?
You need to find a power source so I find next to where I connect the green wire a connector with 2 wire connect the red wire it could be any power so when you turn the key it get power and turn on
So I plugged in the big white connectors to each other, made the green wire go into the white wire, then made the red wire go into the brown wire. I turned on the ignition and the L flashed, then when I started it, it flashed faster and a blinking 1 was shown. Whenever I was going in 1st ear though, it would not save it or show a 2. It would just keep flashing the 1. Any idea on what to do?
You need to get a straight road with not too much traffic,put it in 1 gear ride it with over 3000rpm,when the one gear is save you will see a N then change to 2 gear after seen the n go up the gears and that should help.
I can see where 3 ppl don’t like my video,I does don’t see what’s there not to like this video help so much ppl to get there bike 🏍 indicators up and wrong did I say some wrong?
I need your help do you connect the green wire to the female or male part of the camshaft. I have it connected to the male and for some reason it’s not giving me the signal to start in first gear. Please help! Just say male or female.
@@rickybritish ok. I got that part right, and everything comes on but it never gives the signal to go in gear 1. Do you think it’s because I connected the green wire to the male part? I. Connected the wire to the white wire but on the male part.
Moin Ricky! Bin auf das video gestoßen da ich gerade an meiner MT01 etwas rumschraube! das scheint so als ob das genau dasselbe ist mit den kabeln und steckern! danke !!! greetz
Danke! Hat funktioniert! Hab von der Fußbremse das Stromführende Kabel genommen (waren leider beide schwarze) und das andere an den Stecker vom Camshaft ... musste ich rausoperieren- war aber ähnlich wie bei deiner R1 ! Endlich, war echt doof ohne Ganganzeige! 😋👍🏼
![HEALTECH GIPRO GEAR INDICATOR INSTALL! [ULTIMATE YAMAHA R6 BUILD EP. 5]](http://i.ytimg.com/vi/LhnM8SRbnAw/mqdefault.jpg)
![HEALTECH GIPRO GEAR INDICATOR INSTALL! [ULTIMATE YAMAHA R6 BUILD EP. 5]](/img/tr.png)
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
Thank you,it was very useful.greatings from Greece!
Just installed mine thanks to you. Great video mate 👍👍
Your welcome
Your a legend brother 💯🙏
Thank u mi genna, I just bought this and your video is gonna help me a great deal! Respect boss
Me Breda any help you need just give me a shout seen
Vielen Dank für die ausführliche Video-Anleitung. Hat super funktioniert und mir enorm geholfen.
Alexx Rosso I am glad it did. I am trying to get 1k subscribers
My g respect! You make that real simple for me!💯 nice bike too btw
Yo red fire...your video helped me to completely installed my healtech gear indicator on my 2008 R1. I love the video bro, keep up the good work...I followed your instruction and was able to take my bike apart safely and put it back together without a problem...I program and reset the gear indicator just as you explained and it’s working perfectly fine 😊👌🏽
Rudy Brown-Vidal I am so glad I could help someone else,thanks bro
Rudy 7 need some subscribers I would be more than great full if you could
@@rickybritish I fixed it bro, thanks man. Good video.
@@haqi9fly what was it causing the problem
@@haqi9fly bro your welcome where the man writing from
You saved me lot of time, cheers 🤜🤛
Yours welcome bro
I checked out the alarm and I'm comparing it with the amazon offerings. By the way, I installed my Idea gearshift indi two days ago with your help. Thank you very much. And by the way, don't worry about the haters on here. Your vids always help. At least count yourself lucky you are not in the states with all the antif riots and looting.
Bro I think about that always and say I am happy I am not there but feel it for the ppl
very well explained thanks for your time
Your welcome
Very Helpfull thank you so much for saving me the Time to search the Cables and Connectors, you should sell this Video to the Manufacturer of the Gear Indicator
xVicylx need some subscribers I would be more than great full if you could
@@rickybritish hey bro do you connect the green wire to the white wire or the gray one? Because it looks like you point to the white.
@@haqi9fly the white or the lighter color one.
This video been done awhile back ,and I like it very helpful best out of the most I've watch.i have a 2006 r6 I think it's the same concept .thank bredda"yo sound like a 🇯🇲
Moores Clarendon to be exact yes Jamaican 🇯🇲
Moores Clarendon to be exact yes Jamaican 🇯🇲
@@rickybritish bless up mi boss.good video I'll order my gear indicator soon.if I have issue for what ever reason can I link yo?
@@rickybritish one think I dont get fully....which wire yo seh the green wire goes to on the crack sensor the whiteish looking wire or the darker looking wire??
@@damioncunningham4502 the whiteish wire
Great video, thank you. Speed Safe 👊
I would be greatful if you coild subscribe
damn good video bro
LCodGaming X I would be more than happy if you could subscribe
Nice bro, i will do the same by your receipe 😊
Sasa Majstor need some subscribers I would be more than great full if you could
Good video 👍
David Groves need some subscribers I would be more than great full if you could
GOOD VIDEO MAN >>> I DO WISH YOU SHOWED US HOW YOU PROGRAMMED IT WITH THE SHIFTING THROUGH GEARS
I installed the gear indicator on a Honda it’s the same way they are programmed th-cam.com/video/WZ9JFSHsuQc/w-d-xo.html
@@rickybritish thanks
I also understand that you installed an alarm and a GPS tracking device system...any word on which system is best for my bike...and do you have a video on installation of the alarm system and GPS tracking device?
Rudy Brown-Vidal I am using this alarm system m.aliexpress.com/item/32850540493.html
And this tracking device th-cam.com/video/EFxcIo4AxvU/w-d-xo.html .i had a video somewhere but the installation is not so hard I didn’t connect the cut off or the remote start because in Germany the bike have mobiliser and I can’t bypass it.
RBG, what type of alarm do you have installed? I'm looking for a system that connects to the battery and is real loud. Thanks.
I used this one and it’s loud € 51,89 27％ Off | Original OEM SPY 5000m Two Way Anti-theft Motorcycle Security Alarm System With 2 LCD Transmitters Remote Engine Start
a.aliexpress.com/_BOQL6g
So do you connect the green wire to the gray or white wire? Because you sad gray wire but it looks like you connected the green to the white wire.
White or lighter colored wire
I did everything like u said , but when I turn the bike one it just stay on L dosent change for 1 gear , i conect the on the white wire I should conect to the gray?
L is not bad it mean learn,so you need to find a fraught road and learn the gears
Did you get it sorted ??
Hi
I can't see where you connect green wire in camshaft sensor? White or grey wire can you say?
I connect to white wire it is a big problem? Everything works fine
Ignas Kuvakinas white
@@rickybritish Thank bro 👌
Ignas Kuvakinas more than happy if you could subscribe
Hello, the red wire of the indicator went on to the brown wire?
The red wire is positive you can also connect it to any power wire the battery any key on wire to the brake wire if you connect it to the battery it will stay on when the bike is off,I did one for a friend and I connected it to the brake wire so when you turn the key (key on) the brake light come on and the indicator get power.
id like to see it working buddy
stephen strassen th-cam.com/video/8Cuh2tgAK_Q/w-d-xo.html
Hi great video. I just put one on my 06 green wire goes to light grey wire is that correct thanks
Yes light
Terry did you get it to work???
@@rickybritish thanks bro working now cheers
@@rickybritish yes thanks its working now
Thx for the vid ... Ive done it excactly the same... Only thing is... It wont go past learning the 2nd gear... Tried to reset it i dont know how many times.. But it Just wont work..
Reset the gear indicator turn the key on and off about 7 times then take it on a straight road and go up the gears.
I had the same problem to start with,just reset and try again it should count down from 6 to 1 when you reset and you should see a L then try to get the rave over 3000 and go up the gears
Tony van den Oever hi did you get your gear indicator working ???
Tony van den Oever did you get it to work if not I will make a video for on Saturday and show you how to reset and reprogram it back ok let me know
Tony van den Oever th-cam.com/video/8Cuh2tgAK_Q/w-d-xo.html
Hi,
I have 05 r1,
I followed the way you connected the wires but when I connect the red wire to the brown wire using the connector and turn on ignition. The gear indicator doesn't come on.
Any tips on what I'm doing wrong?
The red wire is power wire you can connect it to any power source,I did my friend bike I connected it to the brake key on switch.
Hi Nazif did you get the indicator to work ??
Hi i didn’t understood were do you connect the red wire?
You need to find a power source so I find next to where I connect the green wire a connector with 2 wire connect the red wire it could be any power so when you turn the key it get power and turn on
Ok done, thanks 🤙
So I plugged in the big white connectors to each other, made the green wire go into the white wire, then made the red wire go into the brown wire. I turned on the ignition and the L flashed, then when I started it, it flashed faster and a blinking 1 was shown. Whenever I was going in 1st ear though, it would not save it or show a 2. It would just keep flashing the 1. Any idea on what to do?
You need to get a straight road with not too much traffic,put it in 1 gear ride it with over 3000rpm,when the one gear is save you will see a N then change to 2 gear after seen the n go up the gears and that should help.
th-cam.com/video/8Cuh2tgAK_Q/w-d-xo.html check out this video and let me know if you fix it.
@@rickybritish I rode in 1st gear at 4000k rpm for 30 seconds but it didn't show the n or 2 gear
The red wire is power 12v key on and the green should be connected to the camshaft wire one of the 2 wires coming from the camshaft sensor.
Which country do you live in ??
I need a video for a Gen 1 Hyabusa. Can you help?
Bayou Raider sorry mate I am really not sure I found this video maybe it can help th-cam.com/video/ek7y5tSP31Y/w-d-xo.html
need some subscribers I would be more than great full if you could
I can see where 3 ppl don’t like my video,I does don’t see what’s there not to like this video help so much ppl to get there bike 🏍 indicators up and wrong did I say some wrong?
Rickybritish German because people can’t help themselves. I think people look on TH-cam to find videos with no dislikes just to dislike them.
Great video! Dont care about jealous people😃👍
I need your help do you connect the green wire to the female or male part of the camshaft. I have it connected to the male and for some reason it’s not giving me the signal to start in first gear. Please help! Just say male or female.
@@haqi9fly green wire to the crankshaft signal and the red wire need to be connected to a power so when you turn the bike key then you have current
@@rickybritish ok. I got that part right, and everything comes on but it never gives the signal to go in gear 1. Do you think it’s because I connected the green wire to the male part? I. Connected the wire to the white wire but on the male part.
Moin Ricky! Bin auf das video gestoßen da ich gerade an meiner MT01 etwas rumschraube! das scheint so als ob das genau dasselbe ist mit den kabeln und steckern! danke !!! greetz
Jay mitdeTurbo super Dankeschön jay
Jay mitdeTurbo Wo lebst du?
Danke! Hat funktioniert! Hab von der Fußbremse das Stromführende Kabel genommen (waren leider beide schwarze) und das andere an den Stecker vom Camshaft ... musste ich rausoperieren- war aber ähnlich wie bei deiner R1 ! Endlich, war echt doof ohne Ganganzeige! 😋👍🏼
bei Kiel (Nord Ostseekanal)
Jay mitdeTurbo ok
is this the same thing as an r6 2008?
GoldMineTurtle I am not sure
GoldMineTurtle need some subscribers I would be more than great full if you could
Mi need fi ask yo ah question blood,yo have ah direct contact?
RICOakaDUDE direct contact to what ?
RICOakaDUDE Send me a text on 0152 37521190
RICOakaDUDE sorry blood just see your message
Red Fire yo dah number deh nah work