Cheap professional repair VW Transporter rear arch
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- So after 5 years of ownership on my lovely vw t4 caravelle, I decided it was time to attempt to repair the rust on the drivers side rear sill and arch.
I have a few rust patches around the van to be getting on with and repairing, Some of the repairs will require to be welded and others may just get away with rubbing it back to fresh metal then painting and filling. I have a few patches around the windscreen and some down the sills. And maybe the arches to repair as well, but we will get to the rest of it in another video, today I'm just going to focus on the drivers side of the van.
So in this video I cut out all the metal that had bad corrosion at the front lower section of the arch where it meets the sill. I treated the rest of the rust on the arch with rust off 'v. After rust treatment I etch primed the bare metal then with filler and high build primer i managed to get it all nice and smooth before spraying the red base coat LB3Y followed by clear coat. All thats left to do is allow the fresh paint to dry before polishing to blend the clear coat.
All of the paint I have used is from automotive paint supplies here in Southampton. The staff are very friendly and helpful and were able to meet my every need. Visit www.automotive... and become lost in a world of paints, fillers, and tools, some of which you would never know existed.
If you enjoy my content or find my content helpful you can donate to help support and fund more videos in the future, you can do this via my paypal paypal.me/Twig... or maybe just buy me a coffee by clicking the super thanks heart which shows you directly supporting the channel Twiggs T4
Show @harryj3399 some love
vm.tiktok.com/...
/ @harryj3399
You can find me here
/ twiggs_t4
/ twiggst4
/ twiggst4
Thanks for watching
Due to factors beyond the control of Twiggs T4, I cannot guarantee against improper use or unauthorized modifications of this information. Twiggs T4 assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Twiggs T4 recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Twiggs T4, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Twiggs T4. - ยานยนต์และพาหนะ
Them wheels are sweet!
Cracking Job 😊😊😊
That’s one lucky van having an owner like you! Looks awesome mate, 👏
🙏 thank you, been hard work and stressful 😂 getting there tho 👌 👍
Nice job buddy! looking forward to seeing it soon!
Hello a great job perfect 👍👍👍greetings from Germany 🇩🇪 👋👋👋 Kai 🙏🛠🔊🍻
Top job mate, good luck for the MOT
Thank you Graham 🤞
Nice one, a lot of time went into that and doesn't she look better for it.. Cheers
Hard work but definitely worth the effort 🙏 👍
Nice one , love your videos 💪
Thank you 🤙
Do you weld the pieces with the primer on or do you grind the edge or something before? I am looking to do this on my own T4 in the near future and wondering what the best practice is. I'd imagine that the weld would be contaminated by it, but it also probably doesent matter since its not structural. Could you perhaps explain the reasoning?
Your repair looks great, btw!
Any metal that is behind another piece of metal I use etch primer. I use zinc primer for areas that are being welded as zinc primer activates with the heat. The weld isn’t contaminated and the primer acts like a flux when it’s hot and will burn away just leaving primer around the weld.
Forgot to say new logo is great, but maybe without the exhaust smoke, looks like another engine rebuild on the cards.....👍😀
Thanks for the feedback, I can change that 👍 the only rebuild I want is for a performance build of 200+bhp 😂
@@TwiggsT4 ye and that would be worth doing it then, what a beast she would be ha ha ,cheers
What are you using to spray that with, the finish looks spot on
Thanks buddy, only rattle cans, but I got the paint mixed up at my local paint supplies, it’s polyester base with clear lacquer.
Just get harry to polish the whole van now
Haha no chance, he won’t even do his without me helping 😂
Love ark eye - its lovely 👍…..NOT!
It’s the worst 😣