How to De-Pin ECM Connectors | Engine ECM Connector Pin Removal & Connector Repair Guide

In this episode of electrical connectors repair I show you how to remove the pins from the Engine ECM connectors which are very complicated comparing to the regular, small connectors.
Join the channel for more videos and more support:
www.youtube.com/@AutomotiveDi...
- Watch the 1st Episode for removing Pins from many more connectors in the following link:
• Automotive Connectors ...
How Immobilizer Works | Transponder Chip, Immobilizer Components, How to Bypass Immobilizer
• How Immobilizer Works ...
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

[@AutomotiveDiagnosis]

Watch another episode for connector pin removal in the following link:
How to De-Pin Any Connectors Quickly & without any Expensive Tool | Connectors Terminals Removal
th-cam.com/video/gzf524fYAxE/w-d-xo.html

[@twinboost9325]

Thanks for the great video, straight to the point and worked like a charm 👍

[@AutomotiveDiagnosis]

Glad you liked it 👍👍👍

[@user-xp8ff4uk1i]

Great explanation!

[@AutomotiveDiagnosis]

Thanks my friend

[@melissafoxx4271]

omg, ty for this and the other de-pinning video. I actually have work todo at the ECM connector and was beginning to think what the hell am I thinking. Now I have full confidence on doing this. It's actually an Audi TT, which just happens to have very similar 2 connectors to the 2 you showed.. Am now subscribing.. xoxo

[@AutomotiveDiagnosis]

Thanks for your kind comment and welcome to the channel, I'm glad this video was helpful👍👍❤️

[@shawnpa]

Very clearly explained with basic tools. If you can teach it this simply, you really know what your talking about. Excellent.

[@autokiaa9563]

Perfect tutorial, I have always had difficulty to do this. Thanks

[@AutomotiveDiagnosis]

Glad it was helpful 🙏

[@MrBluegooh]

Great video, you’re a legend, thanks for your time 👍

[@AutomotiveDiagnosis]

Thanks my friend. I’m glad you liked it.

[@davidborch213]

one of the best videos explaining this procedure

[@AutomotiveDiagnosis]

Thanks for your comment. I’m glad you liked it.

[@redinarasha3229]

Well done

[@AutomotiveDiagnosis]

Thanks

[@davecarpenter4917]

Great explanation and detailed views.
Thanks and Cheers !

[@AutomotiveDiagnosis]

Thanks 🙏

[@fixitfirst7090]

Very helpful, Thanks mate

[@AutomotiveDiagnosis]

👍👍

[@azizbrahim8354]

Thank you sir for your invaluable information

[@AutomotiveDiagnosis]

Thanks for the nice comment 🙏🙏👍.

[@ldsiverling]

extremely useful.

[@AutomotiveDiagnosis]

I’m glad you liked it

[@GraditelMacedonia]

Awesome! Keep going.

[@AutomotiveDiagnosis]

Thanks a lot 🙏

[@mohsenmohsen8514]

Thanks a lot for the good video

[@AutomotiveDiagnosis]

🙏🙏👍

[@mostafasniper6919]

Thank you man

[@AutomotiveDiagnosis]

👍👍👍

[@zaltuwijri]

very helpfull thank you.

[@AutomotiveDiagnosis]

Thanks for watching

[@scienceandtechnology4310]

Nice work ❤❤

[@AutomotiveDiagnosis]

Thanks 🙏

[@ADVENTUREnGAMER]

Thanks for the video, how do you remove the cover of the other T60 (I think) connector

[@AutomotiveDiagnosis]

Hi there, sorry that I don’t have the connector right now to make a video, but if you check the other video from the link below you might get some ideas as I described many different connectors there (it helps even if it’s not exactly your connector):
th-cam.com/video/gzf524fYAxE/w-d-xo.htmlsi=oRWCqS2V7R4Tfnvk

[@vskk7144]

Thanks a lot, it's very clear, Both ur audio nd video, but after depinning, showing atleast once the female pin hole where the male pin goes in would have been more great

[@AutomotiveDiagnosis]

Hi there. Thanks for your comment. I will try to do that in the next coming video.

[@kirkcondon5996]

Great tutorial. I have been attempting to remove pins from a Lexus Anti Skid ECU, and pretty much have butchered the connector trying. What you are showing here for removing the pins from the ECM seems almost what i need to do with this ECU. Any assistance you can provide would be appreciated!

[@AutomotiveDiagnosis]

Hi there, I wish I had that car right now to make a video for you, sorry that I don't. Normally when I want to remove any pin, first I try to locate the locking tabs and anything involved. Then I select the best tool for that. There is another video explaining how to remove the pins from several connectors, that might be helpful too:
th-cam.com/video/gzf524fYAxE/w-d-xo.html

[@rm-xu6hf]

Nice video. How easy is it to insert them back into the connector?

[@AutomotiveDiagnosis]

Thanks. Yes. it is actually very easy. The only important thing is to make sure that pin is inserted in a correct orientation to be locked by the locking tab. You can also watch the following video which shows how to remove and install the pins from multiple connectors:
th-cam.com/video/gzf524fYAxE/w-d-xo.html

[@oscargarcia3983]

hello, does anyone know how to disconnect a connector with a broken release lever from an MBE 4000 ddec?

[@rubenfilippus2956]

Do you have any ideas on Mitsubishi pajero gdi v6 V25 6g74?
I just cleaned the MAF sensor but it's just idling bad and i can't drive it it's just going

[@rubenfilippus2956]

It's just going off i mean

[@AutomotiveDiagnosis]

So engine goes off when it is idling? Have you cleaned the throttle body yet?

[@rubenfilippus2956]

@@AutomotiveDiagnosis yes i cleaned it with carburetor cleaner

[@user-fr9mt4vp1h]

Caja fusibles del carro del tablero abajo de volante cada trae 31 cables no se la orden trae nemerasin los cables al final

[@AutomotiveDiagnosis]

Hi my friend, search for the wiring diagram, it will help.

[@user-fr9mt4vp1h]

Como puedo poner en orden los pines de una lincon nabigator de la caja de fusibles

[@AutomotiveDiagnosis]

You need the wiring diagram to find and tag the wires one by one, also pins locations on fuse box.

[@ks-su7qv]

Do you know how to take apart the connector's of bosch edc16cp19 the car is a Citroen c6 from 2007.

[@AutomotiveDiagnosis]

Hi there, I don't have the car right now to make a video, I'll check and let you know here.

[@ks-su7qv]

@@AutomotiveDiagnosis already broke the connector hahah but thanks.

[@madeinjapan3485]

Magneti marelli ECU connector on an aprilia shiver 750 anyone know how to depin one of them?

[@louisvillalba7695]

God bless you friend Jesus loves you ❤

[@AutomotiveDiagnosis]

Thanks my friend

[@seyedmahdiarabi3962]

👍👍

[@AutomotiveDiagnosis]

👍

[@DarkIzo]

👍