I’m curious why you cut an H for the tie down bracket? Wouldn’t it better to install the tie down bracket directly to the bed and use the H cut for the other piece of the tie down use you can easily attach it? I’m thinking the nuts will get loose if the bed rug is in between the tie down bracket nuts?
Hi Great Video, my truck has the 400 watt outlet and lighting, do you use the same method you used for tie downs for them? Or is there another trick that might work for them? Thanks in advance.
Hello, my 2022 Ford F150 has the tailgate workstation, would I be successful removing the station and putting the tailgate rug under the station and then resecuring the station to the top of the tailgate rug? I would like to avoid just the bed rug only due to the cut edge snagging on my gear as I load and unload. Thank you, Rich, in Minneapolis, Minnesota.
We currently only recommend going over the Work Surface or trimming off the tailgate portion of the BedRug, if you plan to use the Work Surface. The main issue I've personally seen is that the Work Surface is plastic, and not rigid enough to lay flat when the bolts are tightened back down. Since the BedRug is cushioned, that also makes it compressible, so the locations with the bolts will draw down further than the rest of areas, making the Work Surface sort of "lumpy". There may be a way to modify things so that it works better, but we haven't found it yet.
@Realtruck I've never heard of a Bedrug Impact Bed Liner. But I've heard of a Bedrug (Courtesy of Brian Waters Outdoors on YT). Are they the same thing?
Good product. The only thing is there is no company logo on the bedrug at all. They only have it on the top part of the liner front right. I only have the bed rug it's self (don't need the sidewalls done and there is no company logo. To prove that it is what you paid for.
Hey there, it should install the same way. Although, you will have to peel the tailgate portion up when you want to access the work surface. Hope that helps!
I saw one where they used some canned stuff called adhesion promoter where the tape attaches to the spray in surface which is supposed to help it stick to the rough surface.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Had mine installed professionally for $100 - money well spent.
Fantastically detailed (but not too much!) video. The most helpful I've found anywhere on the internet. Thank you!
Best install video I have seen for Ford F-150 BedRug.
Glad it helped!
I just bought one of there and love it.
The floor could be a little more skid resistant though.
Everyone seems to be afraid to cut out for the lights. I installed one of these in an 18 Raptor and the light cutout is pretty easy to do.
This is a awesome video. Thank you very much. I just bought a 2021 f150 and this video helped me with deciding what to buy for my bed
Glad we could help!
Thanks for this great video. This made up my mind to get one. Headed over to your site, delivery was quick! Thanks again.
This was a great instructional video! It helped me out a lot! Much better than the paper instructions provided. Great job!!!
Glad it helped!
So can I install just the floor carpet part and add the sides without zippers later? Looks like it is removable due to velcro. :)
I’m curious why you cut an H for the tie down bracket? Wouldn’t it better to install the tie down bracket directly to the bed and use the H cut for the other piece of the tie down use you can easily attach it? I’m thinking the nuts will get loose if the bed rug is in between the tie down bracket nuts?
Hi Great Video, my truck has the 400 watt outlet and lighting, do you use the same method you used for tie downs for them? Or is there another trick that might work for them? Thanks in advance.
Hey Gil, yes you would need to make relief cuts for access to the plug. Hope that helps!
Hi Gil, I had this same question. Did you end up installing it with the plug and lights? And if so, did you come across any issues?
I have the 7.2kw Propower on-board. How would i accommodate the electrical outlet panel?
Hello, my 2022 Ford F150 has the tailgate workstation, would I be successful removing the station and putting the tailgate rug under the station and then resecuring the station to the top of the tailgate rug? I would like to avoid just the bed rug only due to the cut edge snagging on my gear as I load and unload. Thank you, Rich, in Minneapolis, Minnesota.
We currently only recommend going over the Work Surface or trimming off the tailgate portion of the BedRug, if you plan to use the Work Surface. The main issue I've personally seen is that the Work Surface is plastic, and not rigid enough to lay flat when the bolts are tightened back down. Since the BedRug is cushioned, that also makes it compressible, so the locations with the bolts will draw down further than the rest of areas, making the Work Surface sort of "lumpy". There may be a way to modify things so that it works better, but we haven't found it yet.
What if a spray on bedliner is already done? Will the adhesive stick for the Velcro?
Bedrug claims you’ll need a spray in bed liner install kit. Mine is in the mail. I’ll update you if it’s really needed or not
Am I missing something, why are there massive uneven sides? Big ripples like it doesn't sit flush/flat on the bed sides?
Hey there, it sits flush against the undulated sides of the bed. Hope that helps!
@Realtruck
I've never heard of a Bedrug Impact Bed Liner. But I've heard of a Bedrug (Courtesy of Brian Waters Outdoors on YT). Are they the same thing?
Great tutorial!
Good product. The only thing is there is no company logo on the bedrug at all. They only have it on the top part of the liner front right. I only have the bed rug it's self (don't need the sidewalls done and there is no company logo. To prove that it is what you paid for.
What about installing with a sprayed bed liner?
I seen a video on you tube where a guy put it over his spray in bed liner and it was ok
Thanks for the video
What is the number for this model??? I need one for a 2021 Raptor
How do you install the tailgate piece if you have a work surface tail gate?
Hey there, it should install the same way. Although, you will have to peel the tailgate portion up when you want to access the work surface. Hope that helps!
Good information
1:12 ASMR truck bed edition.
Why doesn't anyone show the installation on a truck with a spray in bed liner??
There’s video on your question. I guess just search bed-rug . It’s a white F150 in the video. Good luck.
I saw one where they used some canned stuff called adhesion promoter where the tape attaches to the spray in surface which is supposed to help it stick to the rough surface.
Can this be installed on a bed if it has a spray in bed liner? My liner has a rough surface and not sure if the Velcro tape would stick to it.
What do you do for the generator access and the bed light?