Chevy Traverse Traction Control / StabiliTrak Problem Most Likely fix!
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- Vehicles have many different parts to keep it running smoothly and safely. Overtime, many of these parts will start to fail and need to be replaced or cleaned. Your throttle body is one of these parts that plays an important role in the proper functioning of your vehicle. This Video shows you how to remove and clean or replace your throttle body on a Chevy Traverse 2009-2017.
To Support Flashback502, please send donations to:
PayPal: www.paypal.me/...
Or
Fan Mail, Products & Donations:
Flashback502
Po Box 20201
Louisville, KY 40250
![ILLSLICK - WINTER IS COMING [Official Video]](http://i.ytimg.com/vi/dwTMeM1zIhQ/mqdefault.jpg)
Did this last night on a 2012 Traverse and it worked like a charm! Running nice today!! Thank you so much - I’m no mechanic by far but you made it easy!!
Thanks man. I followed your instructions. Cleaned out the throttle body with the correct spray. It started up and there was no reduced engine power. The engine light was still on so I took off the positive battery terminal and put back on and that cleared out the engine light. Drives better than ever.
You're very welcome thanks for commenting hope you subscribe like and share.
This is the issue I am having with my Traverse. The Traction control light comes on, the Service Air Bags, and sometimes it has Engin Power Failure and won’t accelerate. I believe it to be the Throttle Body so I will check it out. Thanks for sharing.
I never would have associated the Service Traction Control error to the Throttle Body or Throttle Position Sensor. Stupid programming in my opinion. I did this Throttle Body cleaning yesterday and so-far our Traverse is running fine again. I didn't actually have any throttle body or carburetor cleaner handy so I used starting fluid. I cleared the error codes and we're good to go. Thank you for this video!
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
i randomly tried this because my stabilitrak kept randomly coming on and messing my car up. I was desperate for a solution and only thing i could do was push the traction control off before driving and even then it wouldn’t fix it all the time. There was barely any grease on the sensor or on the throttle intake. But i sprayed the sensor cleaning stuff on both, wiped it off really good. And so far it hasn’t came back on at all. So i’m hoping it’s a permanent fix, and if it is - thanks for this video! ❤️
Your welcome. Hope it fixes the problem. Please like subscribe and share
A whole lot of oil dripping out of mine. You saved the day for me. You the man 👍
glad could help please subscribe like and share and check our my other helpfull videos.
Thank you so much. Solved the problem right away you sir are a genius.
You're welcome! Please subscribe like and share and check out our other helpfull videos
I had no issues with mine. As part of maintenance I cleaned everything and the oily filter area he showed , drove fine. Decided to do a seafoam on the intake and it now shows this message.
Dude, you are my hero. Thank you.!!!!
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Thank you so much you help a lot I was gonna take it to the shop but thank goodness I watched your video save me money ❤❤❤again thank you
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
OnStar was connected to these cars now OnStar is discontinued it's services to cars older than 2013 the system on these car are unable to read ECM.....Chevy owe us owners some money in my opinion
This saves me a lot in my 2013 chevy traverse…DIY👍👍👍
Great to hear!
forgot to add, i did this to my Buick Enclave and it fixed the issue
Thanks I may have other questions about my traverse you seem to know more than everyone else I feel like my car just keeps having issues but I love the vehicle
Your welcome glad could help please subscribe like and share and check out our other helpfull videos.
Would this cause my engine to lightly shake because i had those lights pop up and my engine was lightly shaking??
Thank you! This was very helpful! Do you know anything about why the odometer light is on when I start the car and then it dims out.
Sorry not sure, glad could help
What does the throttle have to do with traction control?
Will this cause a “Service traction control” light?
Thank you so so much for this!!!! I did this today and it saved me so much trouble!!! You’re amazing!
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
my 2014 has been doing this and every mechanic i talk to says something different so im going to try this
Hope it helps. Glad could help Please subscribe like and share 🙏.
Thank you really needed this
You're very welcome! Glad I could help. Please subscribe like and share and check out our other helpfull videos
I have a 2012 Chevy Traverse LS and my issue is that the brakes always tighten up when I’m on a hill or on the interstate. I literally have to pull over and wait for the brakes for hours to loosen up yet the Stabilitrak light pops up as well as the ABS light.
Well, I'm still having trouble with my 2012 chevy traverse, cleaned the throttle and so what. The contraction service light is on and stabilitrak.
Ugh so frustrating 😫
Did he clean that collar with that throttle body cleaner? He didn't say. I'm currently having this issue with my Traverse...
Yes, you should clean your collar also. Please like subscribe and share
Thank you sir for this video
You're very welcome glad could help please subscribe like and share and check out our other helpfull videos.
That’s oil from the engine that’s in there it gets in there from that small tube that is connected to the part that connects your TB to the air box. Being that these vehicles (07-13) are prone to timing chain issues i do my own oil changes every 4000 miles and clean that oil from that part every time so it does not build up to the point of becoming an issue
It found out that there are several issues which cause the ECM to shut down traction control and reduce power to 3 cylinders. It looks like chevy installed a safety protocol that is too sensitive and will shutdown on the slightest error signal. The wheel sensor in my Traverse kept shutting the system down.
I did this and it worked for a while, but the issue is now back and im pissed off. Took this all apart again and throttle body and plenum still clean. i might try the TPS
Hello.. The stabilititrak light come on and off on my chevy traverse 2019.. what could be the issue?
Thanks in advance!!
Can be many things but check your tire pressure, common cause of problem. Please subscribe like and share 🙏.
What was the cleaner you used? And you pointed to things that with the black of everything I had no clue where you were pointing
It's also you break pedal sensor that's what fixed mine it's Under $30 dollars
Thanks for sharing this info 👊🏾
You're welcome
If you clean it like you said and it works will the warning lights that come up go away on its own?
If that's your only issue then it should after driving about 10miles.
I have a trailblazer that says service traction control, I don’t have any reduced engine power and I cleaned the throttlebody with throttlebody cleaner, I still have service traction control, any thoughts?
Starter my 16 traverse last night. The whole car was shaking the engine was sounding weak. The Lights came on saying traction control disable, then Stability message came on along with the light.
Let it idle for a few minutes, restarted it and was fine. But light was still on. Would this help fix the issue as well?
did this on my 2015 taverse and now my ABS / Stabilitrak / Traction Control lights are gone, but i am getting brake pedal vibrations/jumping like i have a worn rotor. anyone have any ideas? is this an ABS issue? could be a rotor issue but this only started happening right after cleaning out the throttle body
I have a 2014 traverse that the throttle continues to advance at start. The rpm’s run up really quick. I shut it down it and so far starts correct the second try. Any ideas what this could be?
Can you spray a MAP sensor the same way?
I have a 2010 Traverse that died while driving it. The display says traction control off and it won't start. It will run on starting fluid but that's it. I've checked fuses and replaced the fuel pump and confirmed fuel to the Schrader valve at the engine but still won't start. Any help????
Did this but the problem came back I was so hopeful
You are a champ. Thank you!!
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Did you have to relearn throttle body
My 2013 Buick enclave i replaced sparkplugs scanner code a mis fire check engine still on cleaned throttle body cleaned map sensor traction control stabilizer appeared and engine shaking
Sorry to hear.Please subscribe like and share and check out our other helpfull videos
So if I do this my light will go off that came on right after we did the brakes and that is now on my dash and it says traction control and stabilizer bar never seen it but one time before this but went off now it won't and plus my ABS light came on to
Do you have to erase the codes after doi g this?
Ok but why my traction control n brake light comes on at the same time. Somebody please help me
You may need to check your brake fluid and you may have a problem with your ABS. Please like subscribe and share
Thank you!
I got these alerts after I changed my struts and got it realigned. No change in power at all. i tried this method in your video and no change. Was told to remove the negative battery terminal which i did and that still didn't fix it. Now what?
I’m having problems with mine the traction control comes on and it won’t start
Your TC may need to be serviced, please subscribe like and share and check our my other helpfull videos.
Mine was dirty like that but it ended up being the fuel pump.
Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Mine keeps having Stabiltrak come on and car won’t get power again to start. Jumping it won’t even help. We changed fuses on ECM too.
My 2013 Chevy Traverse LT turns the TC light on and reads Service Stability Track and Service Traction Control. We have not cleaned the throttle yet. Is this simple to do myself or should I have a mechanic do it? The suv runs normal I don't feel any difference but it's concerning when I'm driving and it turns on. If anyone with the same situation please advise if you solved the problem. TIA
That's not my issue. My issue is while I'm driving the vehicle the brake is pressing down causing the stablizertrak service traction control light to come on . I'm steady having to pull the brake back up with my feet. To keep the light from coming on
Gotta be from KY
L's up👍🏾
Unfortunately this didn't work for me
Mines says same thing, and shakes hitting bumps, and no control in the rain . What suggestions could be the issue?
Your traction control sounds like it needs to be serviced.
Bro what? Scan for codes….diagnose it after that…da fuc?
That's crazy, cause on my Silverado.I don't have to do all that Must be a manufactured default..
It didn’t work
Hace this problem + a lot of white smoke coming out of the exaust, smells like raw gasoline