I'm glad that you're video is still available, it made all the difference with installing this rack. You're so correct, the instructions are garbage. However, I am very grateful again for your video and the simplicity of completing of your installation instructions. Blessings!
The front tire of the motorcycle must rest down into the cradle and be secured with a large clevis pin and hairpin. This step is necessary in case a strap is broken or comes loose during transport. A second clevis pin is supplied. Depending on the size of your motorcycle, this pin may not be needed. If this pin is not used, secure the motorcycle tire with a strap (not included).
Hello and thanks for your excellent instructions. The only thing I disagree with or did differently than you was the first step in the beginning. I found it much easier to put the 8 bolts in with the bracket right side up as opposed to upside down. Cheers!
I have a Honda CRF125...very close to your bike size 😆 Thank you very much for this instructional video. I plan to use this video when I get this ramp...now costing about $119 on amazon. I plan to park my truck next to a small hill or bump of a hill if I can find one to at least help with the ramp slope created by my GMC K2500 3/4ton truck. Thanks again. Very helpful.
Great Job, I ended up putting those middle bolts the other way because My tires rubbed on the threads sticking out, still don't understand that stabilizer clamp
Just got one pretty much identical at Princess Auto (Canada) paid $120 and just used it today for the first time and seems to be good. 1986 CR250 back tire will not fall in the saddle for the pin but just strapped it and it was all good
I think you installed the stabilizer on the hitch backwards - the small leg of the "L" should be against the rack and the large leg flat against the bottom of the receiver so when you tighten the u bolt it pushsd the rack up snug against the inside top of the receiver.
Thanks for the tips, I just picked this up for my ebike (3.25 fat tires)...I paid like $70+ more than you did though :( This steel is not that thick to charge that much more....Plus my shipping box was damaged & almost shredded and lost some of the locking washers/nut/bent loading ramp...I am contacting Amazon about what to do about that. Cheers!
Just bought this exact same carrier and hit TH-cam up for a little better understanding. You are right. The instructions are crap. This video came in very handy.
Thank you for this video. My helpful neighbor and I would still be in the garage scratching our heads if not for your instructions. I will be carrying a 56 pound Lectric XP 3.0 E-bike. Can someone recommend some tiedown straps?
I just ordered mine for my e bike weighing at 120 80 without the battery really does sound like the best bang for you’re buck !! Sadly it’s at 120 now !):
Matching up all the hardware helps. Putting all the bolts, washers and nuts pretty much shows you what goes where. The hitch stabilizer is crap, I purchased the $10 harbor freight one and it’s much more stable
Excellent upload. I appreciate it very much. My rack arrived yesterday evening and with video it will be pretty easy to assemble. Those instructions that came with it are indeed bad! I'll be using this for my 80lb ebike so I'm sure it will hold up well. Might leave out 2 of the long bolts so the tires kinda drop in. Thanks again! What is the purpose of those long bolts with pins?
1) I bought mine for $120 on Facebook marketplace 2) I don’t understand if I’m supposed to remove one of the bolts to make a sort of basket for the tire to seat. 3) the back tire rolled off the carrier last night and I dragged the bike about 40 feet to a stop. 4) it is flimsy and I hate it.
I bought the same carrier to haul my 150cc scooter on my motorhome. Great video, though I would have liked to see your bike strapped down and see you haul it. I had to buy a double reciever for my hitch as the ramp is much too short to get my scooter onto the carrier. So the double hitch hangs lower and this works. I also have a bike rack I had hoped I could use with it also but it is too close to carry bicycles along with the scooter. I put the scooter on the carrier and it was very shaky so I ordered a hitch stabilizer such as you are using here. The company claims this carrier can hold up to 500 pounds but even my 230 pound scooter makes me nervous on this. Make sure you do not exceed the tongue weight on your hitch. Mine is 300 pounds. I have 2 other motorcycles both of which weigh around 500 pounds each. This carrier would never work and even it could carry those bikes the hitch would not suffice.
Thanks a ton for making this video! I was going to get the Harbor Freight model on a sidewalk sale, but I missed it. My budget is tight and I don't want to overspend on something I'll only use a few times a year. Any updates or information on how it held up would be appreciated, but I'm most likely going to get this one. My bike is about 225lbs, so I think this should do fine. My other is a Honda Metro scooter and a GZ250 that is a bit heavier than my other bike. Do you think this will do okay with 350lbs or so on it? That's my heaviest bike fully loaded. Thanks again!
Did- Customs, one question… I just received mine today, exactly the same, question is, how can I know what kind of hitch receiver I do need for a Ford Ranger’95??????…. Thanks in advance and also thanks for this vid, helpful!.
Thank you so much! I could have never done this with those horrible instructions! You're awesome! Next time if the item from Amazon does not have a free return I will never order it. That's how they get you!
dang it already doubled up in past year i got it for like 130 +tax so 150 out the door. i just got this to take my grom on a move from cali to kentucky. sucked though i was supposed to leave last week or so but then when i ordered, the first got returned because the packaging they said was all messed up. so had to reorder it and wait for about 4-5 days extra. and one of the butterfly nuts wont screw on for me one works perfect.. so ill have to try to find a nut for that before i leave tomorrow. though i just might throw the ramp inside the truck. did you tie it down with the spare tire on or off? sick bro its all we need for small bikes.
Just assembled my own and wondered if you figured out what the two "bolt with pin" is for? I wasn't sure if it was to stabilize the ramp with those holes or why it has pins at all. Any thoughts? Do you use them?
I believe the 2 long bolts with the holes at the end are put in place after the bike is put on . The bike tires drop down into the holes where the bolts aren’t . This immediately stabilizes the bike .Then you put the bolts in threw the tires to secure the bike .
Did he say at the beginning that a lot of us wouldn’t be able to assemble it? Then at the end he tried to load it from the wrong side with a large tire in the way???? Seriously
Hi I am from ECOTRIC and do you have any social media accounts that I can reach out to? We really appreciated this video and we want to talk to you about this video.
NO WAY!!.....I would never trust this junk for a full size bike, period.....LOOK at every Real bike carrier on the market, they are Much Much thicker.....use common sense.
7BLACKSMITHS Steel Motorcycle Scooter Dirt Bike Carrier Hauler Anti Tilt Hitch Mount Rack Ramp&2'' Receiver Trailer Hitch Pin (Carrier) www.amazon.com/dp/B07D3QW3PF/ref=cm_sw_r_cp_api_i_MkJLFbZKEX56E?_encoding=UTF8&psc=1 I believe this is it
@@DIDDLYWAYNE On Amazon they are that price. With the increased interest in E-Bikes you can hardly find these in stock so so the demand has gone way up and so has the price unfortunately.
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
I'm glad that you're video is still available, it made all the difference with installing this rack. You're so correct, the instructions are garbage. However, I am very grateful again for your video and the simplicity of completing of your installation instructions. Blessings!
Glad it was helpful!
The front tire of the motorcycle must
rest down into the cradle and be
secured with a large clevis pin and
hairpin. This step is necessary in
case a strap is broken or comes loose
during transport. A second clevis pin
is supplied. Depending on the size
of your motorcycle, this pin may not
be needed. If this pin is not used,
secure the motorcycle tire with a strap
(not included).
*Fits my car perfectly with my new **Latest.Bike** raker , very easy to set up and take down. Great quality and price, very happy with this purchase!*
Hello and thanks for your excellent instructions. The only thing I disagree with or did differently than you was the first step in the beginning. I found it much easier to put the 8 bolts in with the bracket right side up as opposed to upside down. Cheers!
I put it in my truck receiver a lot easier building it while it's hanging on the truck
I just used this method today actually.
I have a Honda CRF125...very close to your bike size 😆 Thank you very much for this instructional video. I plan to use this video when I get this ramp...now costing about $119 on amazon. I plan to park my truck next to a small hill or bump of a hill if I can find one to at least help with the ramp slope created by my GMC K2500 3/4ton truck. Thanks again. Very helpful.
Thank you so much the direction were garbage. I wouldn’t have been able to assemble it without you. Thank you
Great Job, I ended up putting those middle bolts the other way because My tires rubbed on the threads sticking out, still don't understand that stabilizer clamp
Just got one pretty much identical at Princess Auto (Canada) paid $120 and just used it today for the first time and seems to be good. 1986 CR250 back tire will not fall in the saddle for the pin but just strapped it and it was all good
Blessings! Excellent tutorial. The included instructions didn’t give the details I needed, thank you for providing the intricacies.
I think you installed the stabilizer on the hitch backwards - the small leg of the "L" should be against the rack and the large leg flat against the bottom of the receiver so when you tighten the u bolt it pushsd the rack up snug against the inside top of the receiver.
My nephew and I assembled this last night thanks to your video. Really appreciate it man!
Thanks for taking the time to get that together. Will save me some head scratching as those instructions were absolute garbage.
Kevin Larsen of course! I’m glad I could help
Very thorough explanation! Thank you so much. Yeah the instructions I got were absolutely terrible. Worthless lol thank you
Thanks for the tips, I just picked this up for my ebike (3.25 fat tires)...I paid like $70+ more than you did though :( This steel is not that thick to charge that much more....Plus my shipping box was damaged & almost shredded and lost some of the locking washers/nut/bent loading ramp...I am contacting Amazon about what to do about that. Cheers!
Just bought this exact same carrier and hit TH-cam up for a little better understanding. You are right. The instructions are crap. This video came in very handy.
Glad I could be of assistance!
Thank you for this video. My helpful neighbor and I would still be in the garage scratching our heads if not for your instructions. I will be carrying a 56 pound Lectric XP 3.0 E-bike. Can someone recommend some tiedown straps?
Your video saved me hours of frustration. Thanks!
This is so helpful! Thank you. Got ours in the mail but it didn't come with instructions at all, not even on the website.
I just ordered mine for my e bike weighing at 120 80 without the battery really does sound like the best bang for you’re buck !! Sadly it’s at 120 now !):
Matching up all the hardware helps. Putting all the bolts, washers and nuts pretty much shows you what goes where. The hitch stabilizer is crap, I purchased the $10 harbor freight one and it’s much more stable
Excellent upload. I appreciate it very much. My rack arrived yesterday evening and with video it will be pretty easy to assemble. Those instructions that came with it are indeed bad! I'll be using this for my 80lb ebike so I'm sure it will hold up well. Might leave out 2 of the long bolts so the tires kinda drop in. Thanks again! What is the purpose of those long bolts with pins?
Standing on that side of your bike, especially with that spare tire, I just knew you were going to drop your bike. Good job holding on to it.
Thanks for the video, it made the assembly much easier.
Step by step, was way better than the crap instructions provided. Thanks!
1) I bought mine for $120 on Facebook marketplace
2) I don’t understand if I’m supposed to remove one of the bolts to make a sort of basket for the tire to seat.
3) the back tire rolled off the carrier last night and I dragged the bike about 40 feet to a stop.
4) it is flimsy and I hate it.
I bought the same carrier to haul my 150cc scooter on my motorhome. Great video, though I would have liked to see your bike strapped down and see you haul it. I had to buy a double reciever for my hitch as the ramp is much too short to get my scooter onto the carrier. So the double hitch hangs lower and this works. I also have a bike rack I had hoped I could use with it also but it is too close to carry bicycles along with the scooter. I put the scooter on the carrier and it was very shaky so I ordered a hitch stabilizer such as you are using here.
The company claims this carrier can hold up to 500 pounds but even my 230 pound scooter makes me nervous on this. Make sure you do not exceed the tongue weight on your hitch. Mine is 300 pounds. I have 2 other motorcycles both of which weigh around 500 pounds each. This carrier would never work and even it could carry those bikes the hitch would not suffice.
Probably easier to stand on the right side of the bike when loading so you don't run into the tire lmfao
Lolol 😂
That was horrible to watch lol
Great Video! Thanks! I just got it put together. I still don't what those 2 bolts at then with the snap clamp is for lol!!
Looks like a great/cheap rack to carry my Electric Bike. Thanks
Dude! Thank you for the video 👍🏻. Made it super easy to set up
No problem! Glad I was able to help you out!
It'll be nice if there's one of this kind for two bikes😊
You are missing 2 flat plates, thats why the steel is bending when you tightened the bolts. very week without them. good luck
Doesn’t come with 2 flat plates.
Mine didn’t either...I had same issue :(
Thanks your video really helped
Excellent job!
Thanks a ton for making this video!
I was going to get the Harbor Freight model on a sidewalk sale, but I missed it. My budget is tight and I don't want to overspend on something I'll only use a few times a year.
Any updates or information on how it held up would be appreciated, but I'm most likely going to get this one. My bike is about 225lbs, so I think this should do fine. My other is a Honda Metro scooter and a GZ250 that is a bit heavier than my other bike.
Do you think this will do okay with 350lbs or so on it? That's my heaviest bike fully loaded.
Thanks again!
No problem! This is a great option for people like us out there trying to get the greatest bang for our buck!
Did- Customs, one question…
I just received mine today, exactly the same, question is, how can I know what kind of hitch receiver I do need for a Ford Ranger’95??????…. Thanks in advance and also thanks for this vid, helpful!.
Well the hauler requires a 2” receiver
@@DIDDLYWAYNE … but is different in every truck/ car???🤔….. I’m asking becouse of the holes in the chasis….
Can I put 2 dirtbikes on this somehow? The way the ramp goes on looks like I would be able to maybe get a pitbike on there
So since you have had this rack for a few years now. How has it done? Has the carrier held up?
Thank you so much! I could have never done this with those horrible instructions! You're awesome! Next time if the item from Amazon does not have a free return I will never order it. That's how they get you!
Sweet license plate
dang it already doubled up in past year i got it for like 130 +tax so 150 out the door. i just got this to take my grom on a move from cali to kentucky. sucked though i was supposed to leave last week or so but then when i ordered, the first got returned because the packaging they said was all messed up. so had to reorder it and wait for about 4-5 days extra. and one of the butterfly nuts wont screw on for me one works perfect.. so ill have to try to find a nut for that before i leave tomorrow. though i just might throw the ramp inside the truck. did you tie it down with the spare tire on or off? sick bro its all we need for small bikes.
Same as me… paid you ver 140…..I’m not the only one 🤣
VERY NICE video....Thank You !!
Thanks for the video. It helped a lot man!
Just assembled my own and wondered if you figured out what the two "bolt with pin" is for? I wasn't sure if it was to stabilize the ramp with those holes or why it has pins at all. Any thoughts? Do you use them?
I believe the 2 long bolts with the holes at the end are put in place after the bike is put on . The bike tires drop down into the holes where the bolts aren’t . This immediately stabilizes the bike .Then you put the bolts in threw the tires to secure the bike .
It's almost $150 this year and 100cc bike is a tiny bike I bought this for a Honda 125cc super Cub and that is a tiny bike
Didn’t show how to actually get the hitch onto the truck, the part I’ve been struggling with
Just slide it in the hole? Lol 2” reviver
Thanks🙌🏻
can you kindly give me the link to buy this. Thanks.
Hi what’s the link to buy this exact same dirt bike carrier? Thanks
7BLACKSMITHS Steel Motorcycle Scooter Dirt Bike Carrier Hauler Anti Tilt Hitch Mount Rack Ramp&2'' Receiver Trailer Hitch Pin (Carrier) www.amazon.com/dp/B07D3QW3PF/ref=cm_sw_r_cp_api_i_MkJLFbZKEX56E?_encoding=UTF8&psc=1
7BLACKSMITHS Steel Motorcycle Scooter Dirt Bike Carrier Hauler Anti Tilt Hitch Mount Rack Ramp&2'' Receiver Trailer Hitch Pin (Carrier) www.amazon.com/dp/B07D3QW3PF/ref=cm_sw_r_cp_api_i_MkJLFbZKEX56E?_encoding=UTF8&psc=1
@@DIDDLYWAYNE thanks a lot mate :)
@@kk1hunnid26 no problem bud!
Your a rack angel 😇 bro just got it for the surron x it cost me $130 you said $80 SMH but thanx
Well. It was $80 back when I bought it
How did it work for you . What size bike do you carry
So what's that silver paper weight for
thank u for the video
is that 2 inch hitch insert to ur hitch? it's what I need. is it called "Direct Aftermarket Motorhaul Carrier?"
Hey I’m looking for a rack do you have a link to this ?
I’d rather just keep ramp in my trunk tbh. Unless I’m traveling a long time not planning to ride no point in screwing it on there lmao
Used it when I had an SUV
Hinder your process.... yep, sure does. Take the spare off and throw it in the back..
Did he say at the beginning that a lot of us wouldn’t be able to assemble it? Then at the end he tried to load it from the wrong side with a large tire in the way???? Seriously
Lol
Can someone send me the link for this item
Hi I am from ECOTRIC and do you have any social media accounts that I can reach out to? We really appreciated this video and we want to talk to you about this video.
Sure thing! You can message me on my Instagram @diddlywayne
thanks for the help! the given instructions are the worst
Did you also try to load your crf450r on that motocarrier?
Mine cost 123.00
you think it will hold big bikes?
Yes
NO WAY!!.....I would never trust this junk for a full size bike, period.....LOOK at every Real bike carrier on the market, they are Much Much thicker.....use common sense.
Funny - 10/4/2022 - I just paid $120 - the instructions SUCK - big time
What model is this from amazon?
7BLACKSMITHS Steel Motorcycle Scooter Dirt Bike Carrier Hauler Anti Tilt Hitch Mount Rack Ramp&2'' Receiver Trailer Hitch Pin (Carrier) www.amazon.com/dp/B07D3QW3PF/ref=cm_sw_r_cp_api_i_MkJLFbZKEX56E?_encoding=UTF8&psc=1
I believe this is it
These are now $239.95
Depends where you buy from
@@DIDDLYWAYNE On Amazon they are that price. With the increased interest in E-Bikes you can hardly find these in stock so so the demand has gone way up and so has the price unfortunately.
@@michaelbattista1334 dang! That’s unfortunate
I bought this same bike carrier for $108 dollars 💸 off Amazon, I was robbed! Seriously 😳 robbed
ha ha ha ha ha ha ha haa ha ha ha ha ha ha ha...............
Just paid 150🫣🥹
Just paid $135…. Check you bank account 🤦♂️
This video was made 2 years ago lol. Back when it was $80 🤦🏻♂️
@@DIDDLYWAYNE .. yeah, you right, my kid told me so….
Could this hold an 450 bike?
Absolutely
NO WAY!!!.......there's No way on earth I would trust this junk for 300lbs+......it's NOT thick enough, period.
U talking to much bro god damn
Lmao then you make a video