Creality Ender 5 S1 Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 พ.ย. 2024

ความคิดเห็น • 78

  • @NuarStanger
    @NuarStanger ปีที่แล้ว +17

    Stringing can be dialed in in the slicer software. Retraction distance and speed need to be tweaked.
    As for the bed adhesion. Raise your z offset a little bit. It will print the 1st layer just a little farther away from the bed and won't "push" the molten filament as much into the build surface. Mess around with it a little bit and i'm sure you'll have it dialed in the way you like it.

    • @shivam_in
      @shivam_in 11 หลายเดือนก่อน

      Won't it affect other layers as well, offset will be used in all layers?

  • @802Garage
    @802Garage ปีที่แล้ว +10

    Very interesting to hear your perspective since some others with far more FDM experience have had issues. This is why reviews from multiple angles are important. That spider man print is particularly impressive. The stringing can likely be fixed with either a minor retraction change or combing setting. Good stuff!

    • @Whodini1010
      @Whodini1010 ปีที่แล้ว +1

      Bro no way you’re into 3D printing too
      Big fan btw

    • @802Garage
      @802Garage ปีที่แล้ว

      @@Whodini1010 I am indeed as of fairly recently! Already neck deep in research, hahaha. Planning to 3D print the V10 Impreza throttle body adapter prototype. Thanks a ton!

    • @Whodini1010
      @Whodini1010 ปีที่แล้ว +1

      @@802Garage please make a video on that !

    • @802Garage
      @802Garage ปีที่แล้ว

      @@Whodini1010 Def plan to. So much to release. Thank you!

  • @Pugwash.
    @Pugwash. ปีที่แล้ว +3

    Nice review. I've had mine for a few weeks now and quickly dialled out the stringing with retraction distance and filament temperature.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      Yeah, I still need to do mine. It works fine for what I need

  • @Danny30197
    @Danny30197 ปีที่แล้ว +1

    The fact creality has reached out to you baffles me, unheard of smaller youtubers to be picked inb my eyes so big respect to creality for knowing whos worth helping

  • @LuisLopez-pq6ke
    @LuisLopez-pq6ke 11 หลายเดือนก่อน

    This review helped a ton. I'm a tabletop gamer looking for something simple for me to make stuff for RPGs and board games, so a simple ready go option is nice.

  • @JUNIORCLP
    @JUNIORCLP ปีที่แล้ว

    Honestly, Ive been hovering around this printer for a few weeks wondering If It was for a beginner like me, Ive literally Saw 30+ vídeos about It.. and yours a vídeo with 13 minutes (and i Saw really long ones) .. really set my mind into getting one tomorrow, and convered all the things ive really wanted to know, simple and direct, thank you sir, keep UP the great work, New subscriber added.

  • @TonyGrant.
    @TonyGrant. ปีที่แล้ว +5

    I'd like to see someone do a review on the Ender 5 Plus. It has a bigger and even more stable build plate. For some reason there are very few reviews of it on youtube.

  • @jonathangould1255
    @jonathangould1255 3 หลายเดือนก่อน

    Just bought it as it’s half price at the moment. Looking forward to getting it and setting it up.

  • @aruzmesci5207
    @aruzmesci5207 ปีที่แล้ว

    I absolutely love your reviews. I will probably but a resin printer one day, and your reviews are extremely helpful in knowing what I'd be getting myself into. I'm sure you heard this a million times, but if you like the idea of "plug and play" FDM printers, you might like the Bambulab printers. They're kind of expensive and the build area is not significantly bigger, but these also produce very good quality prints quickly without any significant assembly required.

  • @alexhirst2699
    @alexhirst2699 ปีที่แล้ว

    Great review, I have had this printer for a couple of months and had no problems. This is my second printer the fist was a Elegoo Neptune 2 s. That took me longer to put together then the Ender 5 S1 I also bought the Sonic Pad which is excellent and works well with the printer. Just now waiting for the enclosure.

    • @ejeZ327
      @ejeZ327 ปีที่แล้ว

      Hola no tuviste problemas con la nivelación automática?

  • @_M_a_r_t_i_n_M
    @_M_a_r_t_i_n_M 9 หลายเดือนก่อน

    I'm so tempted to pull the trigger on one of these right now, currently owning two Sovol SV06 Plus machines.. After having moved onto Klipper firmware, I am BADLY wanting a CoreXY printer and to move away from bed-slingers entirely. If this machine had a 300X300 buildplate, I would already have one in the mail.. I will sleep on it and see how I feel tomorrow. What he said bout tall models at higher speeds with bed slingers is very true.

    • @daavc7252
      @daavc7252 3 หลายเดือนก่อน

      Check out the endor 5 s1 plus. Has a bigger plate

  • @cybergnetwork588
    @cybergnetwork588 8 หลายเดือนก่อน

    Stringing is not always a retraction settings as per other comments. New fast printer profiles in slicers tend to keep the nozzle way too close to the print while travelling. Most likely, it will drag on the infill. In my case, the nozzle was not 0.4mm anymore because of the dragging. It was a tiny bit more and for this reason, it was extruding a tiny bit more filament. Said filament was the cause of the stringing. As soon as I've replaced the nozzle, no more stringing. Obviously, to increase the nozzle lifespan, I've increased the Z hop from 0.1mm to 0.2mm as well as disabled Reduce infill retraction. Last thing to change in the slicer was to comment out, in the start gcode, the retraction happening between the purge lines and the beginning of the print as it would not extrude for the first few millimetres of the print. Takes 2 minutes to swap a nozzle as opposed to troubleshoot for hours. At least, you are getting this out of the way. Keep in mind that it does not take much dragging for the nozzle to behave as such. Only a 1/4 spool is enough.

  • @Jozza420
    @Jozza420 ปีที่แล้ว

    Awesome review man, been thinking of picking up an fdm printer nice to get the beginner's perspective on it 🤟

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      thanks, really appreciate the comment

  • @emilcost8613
    @emilcost8613 ปีที่แล้ว +1

    Your channel is so good, it's actually exciting to see you've posted a new video! Love the camera work and the editing is incredible. Such a good channel!

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      Wow really?! this comment has made my day!

  • @daavc7252
    @daavc7252 3 หลายเดือนก่อน

    O bought mine yesterday its on its way. Whrn i sae your batman cask i wsnt one for my 6 yo son also. Wherr did u find the prints? If i msy ask?

  • @Jump_Today
    @Jump_Today 9 หลายเดือนก่อน +1

    Print at 220 no more strings

  • @calvincrick7887
    @calvincrick7887 ปีที่แล้ว

    Thanks for a great review

  • @wildhogget69
    @wildhogget69 8 หลายเดือนก่อน

    What a great overview, I am wanting to get into 3d printing I have no idea, I just want to print things nothing as big as a helmet What 3d printer in your opinion

  • @russellj911
    @russellj911 6 หลายเดือนก่อน

    I have this printer and I wish I’d returned it when the p1p came out.

    • @russellj911
      @russellj911 6 หลายเดือนก่อน

      It’s for sale haha

  • @MrDaneis
    @MrDaneis ปีที่แล้ว

    I cant wait to see what you think of the Anycubic M5s. Might be my first resin printer if it all checks out

  • @bigdawg111
    @bigdawg111 4 หลายเดือนก่อน

    Mine has been a beast (sonic pad).

  • @68Lyndon
    @68Lyndon ปีที่แล้ว

    Love the video. Have you tried the Ender 5 plus? Be interesting to see how the bigger build plate fares.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +2

      Creality won’t work with me anymore

    • @mxracingunlimitedltd7784
      @mxracingunlimitedltd7784 11 หลายเดือนก่อน

      @@FauxHammer Why what happened? I literally bought this printer because of a few reviews which were mixed and confusing, then i saw your review video and it was just a lot more clear and i decided to get this exact model from Creality. Great video btw!
      I was also considering the Ender 5 Plus but with the sale it was still 100$ more than this and i got this one for $300 new from microcenter on a sale they were running..
      I got the acrylic enclosure side panels, and they also make a nice top piece to finish the enclosure as well now. So besides the bottom it's pretty sealed up now actually..

  • @michalkowalski480
    @michalkowalski480 ปีที่แล้ว +1

    Nice printer but I have a lot of issues with it. The first printer stopped working on the 2nd day, oder a new one and it wasn’t working at all. Both had hotend issues.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      Ooof that awful.

    • @michalkowalski480
      @michalkowalski480 ปีที่แล้ว +2

      When it runs, it runs nicely but to get it run is problematic unfortunately

  • @GraczWatch
    @GraczWatch ปีที่แล้ว

    Good job. I hope you get your hands on the Creality K1.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      looks nice, but I'm a beginner FDM printer, not sure what value I could add. Next one for me is the Harlot Pro! I know my resin printers very well.

    • @CyberninjaX01
      @CyberninjaX01 ปีที่แล้ว

      ​@@FauxHammer looking forward to your review of halot pro....I'm torn between that and the GK Two..so hurry up and review already ...I NEED TO BUY ONE 😅

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว

      @@CyberninjaX01 I wish I could advise you now. But it’s not arrived yet

    • @CyberninjaX01
      @CyberninjaX01 ปีที่แล้ว

      @@FauxHammer I await patiently 😅

  • @lynnmckenney1987
    @lynnmckenney1987 ปีที่แล้ว

    No matter how many times I level my ender 5 s1...it refuses to consistently print...well..anything.
    I just want the thing to work...I've never gotten it to print 2 prints back to back that actually finish after a year of ownership.

    • @sonicapollo
      @sonicapollo 9 หลายเดือนก่อน

      Not sticking to the bed? You might need to adjust your z offset.

  • @arfifteen9344
    @arfifteen9344 ปีที่แล้ว

    This vs Sovol SV06 plus. Which one should I get?
    Thanks in advance!

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      Never heard of Sovol SV06, I hope the community can answer

  • @mathiasrennochaves3533
    @mathiasrennochaves3533 ปีที่แล้ว +1

    Ask Creality their k1 max for a review... Your channel would get a lot of views because off the hype and you would have a printer just the way i think you would like based on the things you had said on this review.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      I'll ask, not sure what Value I could add by reviewing it.

    • @802Garage
      @802Garage ปีที่แล้ว +1

      @@FauxHammer Reviews from people with less experience are super important because many, many people will be looking at any given as their first or their first upgrade!

  • @daleburgess6223
    @daleburgess6223 ปีที่แล้ว

    Very nice :D that some Space Hulk terrain you were printing by any chance?

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +2

      It is terrain that could be used in Space Hulk.
      HVAC Tunnels by The Dragon's Rest

    • @leonandrews2668
      @leonandrews2668 ปีที่แล้ว

      Lol

  • @mathiasrennochaves3533
    @mathiasrennochaves3533 ปีที่แล้ว

    Why your timelapse at 7:50 was so weird on the bed part?

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว

      because I just set up a camera on record, most people prroperly jerryrig a trigger to capture each layer. I;ve no idea how to do that.

  • @msp5616
    @msp5616 ปีที่แล้ว +1

    Saw this on sale from the creality store for £379... bargain ?

    • @daavc7252
      @daavc7252 3 หลายเดือนก่อน

      I bought one . 300£

  • @jeffreyvansteenberg5351
    @jeffreyvansteenberg5351 ปีที่แล้ว

    Been following for a short while and have been watchiing you because i want to jump to resin and I was totally with you until I heard you say you were an Apple guy. *sigh* I'm out.
    Just kiddng - Love your vids! Even if you are an Apple guy.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      Sorry, I do appreciate Android. But working in a tech jo, when I come home. I'll get too distracted with the tinkering you can do with Android phones. I like to be brain dumb in the evenings, iPhones are dumb.

  • @daniel-is6zf
    @daniel-is6zf ปีที่แล้ว

    I prefer the kits . Lets me learn the printer what I need to keep an eye on and most of the time they're open source for parts .. da Vinci were bastards for rfid-ing they're spools...

  • @badewannenwikinger2522
    @badewannenwikinger2522 ปีที่แล้ว

    Thx for this Video. I use my ender 5 S1 with a Sonic pad.. This works great:) I have a question.. can you share your Profile?

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว +1

      i have no idea how Klipper works, so I didn;t bother with the pad. But my profile is what came as default and i literally just lowered the layer height.

  • @hexesandheroes
    @hexesandheroes ปีที่แล้ว +1

    It's not core X Y.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว

      No?

    • @rahyan.
      @rahyan. ปีที่แล้ว

      ​@@FauxHammer No.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว

      @@rahyan. how so? What am I missing?

    • @rahyan.
      @rahyan. ปีที่แล้ว +2

      @@FauxHammer It's a Cartesian printer as you have a dedicated motor for each axis. It does look (a little bit) like a Core XY though.
      The misses are only some speed and way more durability. With a Core XY you could've reached better speeds, but it's kinda useless as the 250mm/s are already impressive.
      As for durability, you'll only have to check if the wheels aren't getting wear, if they are (it generally happens after 2-3 years of ownership and lots of prints), you can replace them. You can also check if the belt is properly tightened only if you have some printing issues, if they're not, you can screw it back.
      You somehow confused it with a Core XY printer due to the fact that you're new to FDM printers (as I am too. But I'm always seeing Core XY machines and Cartesians ones as well as different types). The wheels directing the y axis (and the movement of the x axis) are a giveaway that it's not a Core XY.
      I hope this helps.
      By the way if you see this comment (or if you read till here), I'd like to know how your printer holds up after >1 month of use.

  • @jwlee9791
    @jwlee9791 9 หลายเดือนก่อน

    lucky for you... it just didn't work for me out of the box... i had better luck with Ender3. I am still having bad lucks with some prints after a year of owning this.

  • @tombo7719
    @tombo7719 ปีที่แล้ว

    Ender 3 S1 Pro is no good, and after 1.5months using, Creality has ghosted me and no longer returning messages, a nearly $500 printer that doesn't work, damn near brand new, and a brick.
    I will NEVER buy a Creality again, and I started with a Creality CR10 S5 6yrs ago.

  • @wgambier2000
    @wgambier2000 ปีที่แล้ว

    my Creality Ender 5S1 is the worst printer I have ever owned with enclosure and sonic pad.nothing easy about this printer biggest waist of money and time.
    I would trade it in a minute for a anycubic kobra plus 2 anytime.

    • @FauxHammer
      @FauxHammer  ปีที่แล้ว

      Really, you’d trade this for a bed slinger? It wasn’t that bad for me.

  • @rotebeete1267
    @rotebeete1267 10 หลายเดือนก่อน

    Sorry, but the Ender 5 S1 ain't a good machine. Don't believe me? Go on, buy it and find out yourself. 😉

    • @FauxHammer
      @FauxHammer  10 หลายเดือนก่อน

      It was good at the time, it;s been quickly replaced

    • @fraudbuster1456
      @fraudbuster1456 8 หลายเดือนก่อน +2

      Sorry, but you don’t criticize it without stating at least a reason why and preferably a verbose explanation if you want people to take your comments seriously. While stating that you don’t like it, you have given nobody else reason to avoid it. That leaves the impression of the original video and therefore makes your comment redundant. Maybe edit your comment so you sound more informed and experienced.

    • @calvinchao05
      @calvinchao05 4 หลายเดือนก่อน

      Agreed, been using an Ender 5S1 with Sonic pad, PEI Sheet, and Acrylic enclosure. I learned a lot having to tinker with it but out of the box the sonic pas and software wasn’t working and I had to flash it… I love to tinker but when I spend more time tinkering rather than printing…. Its not a good experience

  • @georgeyboyhowe1685
    @georgeyboyhowe1685 ปีที่แล้ว

    poor quality prints creality have there fan boys i have a prusa mk3s+ last 4 years no problems and prints perfect