Holy crap, a model maker who understands that not everyone has an airbrush! The amount of hate I have received in some modeling circles when i say i brush paint because i cannot afford and airbrush is frankly staggering.
Really? Dang I can’t afford a airbrush setup aswell, I got discouraged when I saw the lack of brush paint support. I also can’t afford 50 different spray cans. So I’m using 10ml Timiya bottles. Hope it works :/
@@everythingrc2324 you could pickup one of the new battery powered airbrushes. Some are actually quite good, and only cost around $50. Same price as a kit basically.
I started Military Scale Modelling in the 1970's ... back then brush painting was ubiquitous AND an Art Form - there's nothing cheap or second rate about it compared to Air Brushing, but it requires a level of skill just like anything else. The fact that Brush Painting allows an entry level enthusiast to get into the hobby for less should not be confused with a lesser result ... it's the way it was always done, these days you just have more options.
@@Curioventura P.S Playing Devils Avocado on Tamiya Paint ... that scarring that was mentioned can in some cases work for you, particularly in the case of Scale Military Armour - Tanks for instance. A lot of the texture found on the surface of Tank Turrets - those with large area of cast steel - absolutely possess that kind of rough and ready surface texture. It is something that Modellers usually TRY to add for more realism by using things like Mr Surfacer etc. So ... depending on whether you want, need or require a finish that is slick and perfect vs not ... either of those paints may suit your task better than the other.
I know this video is 3 years old. So I hope you get this. I really appreciate your video. You brought something to my attention that I did not know. I have watched many videos on brush painting. I do not have an airbrush so I use brushes. I just got back in to modeling after 45 years. I wanted to get back in to it. I never have trouble with the build or or fabricing any part or detials. I have a problem with painting. I for got everything. I really thank you for this video. It was the best I've seen yet. I have subscribed and will loke forward to seeing more. Any kind. With the way you explain things any of your videos will be worth watching. Thank you for your time. You stay safe and happy.
Thank you so much for the kind words and even if it's 10 years later, I still respond to comments and appreciate them. I may do a revised version of this video in time. We'll see but thanks again George.
Thank you so much for this. Had been building models as a teenager at the end of the 90s without any clue how to do it. Models looked terrible but I had fun anyway. Now my wife gifted me a Haunebu II Kit to keep me entertained during long calls in the homeoffice. Your video has helped me tremendously in understanding how to get good results and even enjoy the mistakes I'm making as part of the journey of improving. Good stuff mate. Cheers from Germany.
Thanks! I am very new to gunpla painting and I was thinking to start with handbrush, and I found this video! You are surely very professional by the way you explain! I hope for another handbrush tutorial coming up!
Seriously, I know this is an older video but please believe that it is still helpful. I applied your advice of using a soft brush and a soft brush stroke to three kits today. Thanks again bud.
Some very valuable advice, I used brushes for the models and with Tamiya, Vallejo and Testor paints. I learned the importance of brushes and smooth strokes and waiting patiently for the first coat to dry before applying the second coat.
Thank You! Im just starting and this has been one of my biggest holdbacks is the painting. I just want to start simple and work my way up and this helps a million! Thanks for the brand name recommendations!
I really appreciate this video. I'm looking into brush painting some gunpla, but I've got no experience painting anything aside from canvas. Your video gave me a lot more information than i was expecting, but it'll definitely be extremely useful in helping me buy my supplies and determine my approach. Thanks a ton!
Tamiya is brilliant with a brush, but you have to do things differently. 1) use acrylic retarder, this slows down the super fast drying of Tamiya paint. 2) Don't overbrush the paint. I notice you going over the same area many times, no need, Tamiya (especially if you use a little retarder) sucks right in to the details, leaving no brush strokes. Even if you slop it on. Further coats can be applied, just don't overbrush areas (this can reactivate the paint underneath), and preferably use some acrylic retarder.
I wish I knew about the retarder thing earlier... bought a Tamiya "flat flesh" color and while it is a bit too dark for my taste, it was very good for what you said - sticking to surface and "sucking into" the details. But it dries waaaay to fast and is hard to use without either constantly drawing small amounts of it from the bottle, or using said retarder.
I know this was from two years ago, just found it. Thank you for the very interesting video. I have two airbrushes but one needs to know how to brush with brushes. Judy in Nova Scotia, Canada
those are good tips, thanks. I'm just getting back into model building and haven't got an air brush kit yet. I've gotten good results brush painting with Revell Aqua Color and Vallejo Model Air paints.
I cannot put into words at how useful this video is. For the 2 years I've been into painting models (well I've only painted 4 since I'm 14 and I don't have much of a budget with Tamiya models and paints) I've always wondered what am I doing wrong why does my finish looks so bad, this video is a super big help
Great video! I do a lot of miniature painting so I have plenty of citadel paints - the only issue I can think of is maybe the colours not being 'Gundam Official' but I do quite fancy priming my entire PG Freedom and attempting a metallic finish 😂
Finally, this is the video I was looking for since I am currently just starting on my painting journey and I couldnt get the technique of properly painting with tamiya acrylics just right. It always left a scarring on the paint and it rubs off while applying second coat too. THANK YOU SO MUCH FOR THIS VIDEO it helped a lot. Simple yet useful
When it comes to brushing I have been using mostly acrylic craft paint and testors enamel . I feel like enamels need to be thinned alittle for it to spread nicely and not leave brush strokes behind. Tamiya in general covers good but needs to be thinned a hair too.I also think it depends on the color. Whites, blue, and reds definitely need to be thinned or it will cake up on you. Silver or aluminum colors spread evenly without thinners.
Gonna go start painting after 2yrs of building gunpla. I gotta sub after watching that. Great tutorial. Idk if i can get citadel in my country, but the technique you taught will help me.
I have been doing some hand brush painting on some kits for a while now, and it's been a trial and error. This video simplifies in a great way over others I've seen and have given me some great tips to improve my skill, thank you! I mostly use Vallejo, but I want to try citadel now. Keep up the awesome work!
As a hint, even where your surface texture is not "just so", like with where you had some roughness with the Tamiya paint, you can still sandpaper the paint texture itself with a good hobby level "wet/dry" fine sandpaper pack you can get from Hobby Lobby. Even your best sprayed on finishes need smoothing, and a good clear coat to cover any "repairs" done with sandpaper, etc.
Solid test! don't see side by sides often. I will say Tamiya needs to be thinned about 2:1 or 1:1 paint to thinner. I paint all my gunpla like this and you get much better results than here. Tamiya's X20-A has a mild detergent that will break surface tension and remove brush strokes right before your eyes. Adding a bit of their flat-base to the mix will give you nice matt finishes and make the paint adhere better to the plastic. Tamiya is my favorite, even if it requires more prep!
Nice tip! I'm living in Japan, just starting into painting, and wasn´t make much sense to me pay more on Citadel, as it is imported here, while Tamiya is home produced... :D
Great video I own a airbrush but dont use it very often as its a hassle to clean and switch paints im a mostly ship modeler and mainly stick to tamiya as I find it a huge pain to try and find citadel paints for my ships as the names are all fictionalized. Amazing video taught me some new stuff thanks.
Thanks! After using Ez Dope to shrink the tissue, you can lightly brush the plane. Tamiya paints work well for this. I have limited knowledge on stick and tissue builds but I do know others have used Tamiya and other model paints for this with success
Thanks for the video. Yes, not all of us can fit an airbrush into our budgets...I'll also be using craft acrylics for the same reason & from what I've seen on videos, I'll have to prime a couple of coats then 2-3 thinned paint coats handbrushing. I guess 24hrs is cure time before next coat of paint eg Deco Art Acrylics?
First off, Thanks for this video. OK, I'm building a 1/32, 1/48 scale fighter plane what would be best size brush and type paint to let's say paint wings of plane? Thanks
This was a GREAT video. I have been into GUNPLA for about year now. 30 kits in and wanting to try painting. Bene pretty confused though and this video helped me a lot!
what kind of Citadel paint are you using? There are base, layer, technical, contrast, shade, etc. What are the differences? What do you use to clean your brushes? Where do I find the Grumbacher brushes?
Great video, i just want to ask do i need to use thinner for the tamiya acrylic paint, im planning to use the brushing technique to repaint a bus model do you have any tips on doing that?
Very nice video, thanks! Do you have any advice with regards to Vallejo Model (not Vallejo Game Color, or Vallejo Air). Would you put it near the Tamiya side, or more on the Citadel side?...
Thanks! They work well, kind of in the middle of Tamiya and Citadel as far as viscosity out of the bottle. They're a good choice and it's solely up to your preference
Brilliant video. I'm going to start using citadel. I don't have the space or cash for an airbrush and I've tried Tamiya. What's your opinion on a base coat using a rattle can then a top up using the citadel paints? I like making tanks
Thanks! I'd be careful using a rattle can. The spray comes out thick and the last thing you want is to lose detail on the model because of excess paint filling up those details
Quick question. The citedel looks better, but the other paint in shiny. So with the citedel, looks like you will need a clear coat, but not with the other. Is that right. I’m planning on building the supernatural impala. What would you suggest. Wish o could just find one already painted, but most kits come unpainted
Do I have to prime the parts I want to paint with primer? I just want to add small details that would be from stickers and don't really want to buy an entire can of primer just for these small things. It's for a hg strike freedom revive if that matters
Hey is there a way to paint translucent coloured paints onto clear plastic without using an airbrush setup? I have a car model that came with lights that are all clear and the taillights need to be a translucent red.
If there is a way, im not too sure how to do it with the types of enamels, lacquers and acrylics we generally use. I know how to do with the cheap water acrylics you get from hobby shops but that's an entirely different thing I'd have to experiment with
Thanks from a brand new subscriber! How much time is ample time between coats? I build model cars almost exclusively, so I would appreciate any advice about brush painting a large, smooth surface, like a car body, please. Thanks again!
Excellent video my man. I don't wanna invest on an airbrush just yet. But I want to be better at painting and customizing my models. The one question I have is on base coating. How do I do a base coat to make sure the paint sticks besides washing and cleaning the parts?
Ive used some random acrylics for a long time and they work fine imo but i started using tamiya and theyre good too. For me tamiya paint dries and looks less shiny. Both are good so it doesnt really matter, whatever works is fine.
question. i bough a paint(any color) out from hobby shop. its been sitting there for a while and the paint pigment and thinner seems separated. whats the proper way to prepare my paint
I want to hand brush a 1:350 warship model, especially how to paint the hull. To get this wright is my question ? Should I use little rollers or is it possible to paint with a pencil? Thank you.
One question about the Tamiya.. I know you mentioned the bubbles already but what about the parts that still have that wet look, even though it's completely dry? Any idea what causes that? Is it from painting too thick of a layer?
are you using water to clean your brush after using the tamiya paints ? i ask this because i always have difficulty with adding water to them as i have always been led to believe that they are solvent based and not water based paints
Would love to try Citadel for brush painting military models but they have such weird names, how do I know what colours are equivalent to the Tamiya colours?
@@Curioventura Do you have a recommendation on where to start? I have the pipettes for mixing my paints. Would you say 3:1 paint to thinner would be a good place to start or would that be too much thinner?
What do I need to do, If I want to make custom figures on marvel legends? Do I need a technique before and after painting tips? Cuz I just have tried to paint on figure with model color paints and after drying the paint comes easily off. Did I did maybe something wrong? Or the paints are not good enough for plastic? I want to know!
The surface of the figure needs to be completely wiped down with alcohol so you have a clean surface. Then you need to primer the figure. 1-2 light coats. After that, apply your paints. Once the paint is dry, spray the figure with a protective clear coat. That should give you a good paint bond however you don't want to pose the figure excessively after any paint job because you'll stress the paint where the joints are. You can do some clearance sanding in the joints however to give them just enough space so when paint is applied, it won't rub. You also Sand the entire figure with 1000 grit to give the paint something to bite onto as well before you paint. I hope this helps
hello- apologies if this has already been answered, but will any brand of acrylic paints work fine with gunpla or do i NEED to buy the more expensive brand paint sets? i already have my kolinsky brand brushes, tamiya brand panel liner ink, godhand brand nippers and so on- my wallet is really feeling the pain and my wife is starting to grow concerned with my new hobby lol- im trying to save a buck where i can when i can and was wondering if any water based acrylic paint set will do or do i need citadel or whatever
Good prep work lol. I usually don't prime with brush painting ad the paint goes on thicker with it and the more layers you put on, the more you run the risk of filling in details and panel lines. Just sand the pieces down with 1000 grit and paint if you want good adhesion but don't over sand as you'll run into the same issue with too much paint.
@@Curioventura Ya. That's what I've run into. Loosing detail. But I also tried thinning it way down. And it actually kind of worked. I'm using Tamiya Super or Supreme primer.
Habe den Kanal gerade gefunden. Ich finde es ist alles super erklärt. Sehr informativ und gut für Anfänger. Gleich abonniert. Jetzt hab ich ein neues Hobby. Just found the chanel. I think everything is well explained. Very informative and good for beginners. Subscribed right away. Now I have a new hobby.👍👍👍
Great video! I was searching this kind of video for like month, because i like to start painting with brushes. Could you make or show any video with military models done by brush? With any tips and tricks included. Great video again! Greetings from Lithuania 🇱🇹
Yes it is but just make sure you're using gloss paint or clear beforehand. It'll spread if it its applied to flat paint. You can always top coat with semi gloss or matte afterwards
What is the best brush to use to get that air-brush look in the video? any recommendations other than the one you mentioned in the video? I was experimenting with citadel after watching your video and got some brush strokes on the plastic, so definitely was using the wrong brush. great video, thanks.
Anything with real soft, medium length bristles and a light pressure to feather the paint. Also, try thinning the paint just a little to get a looser viscosity
Hello sir. Im new to gunpla but i want to stop using can spray top coat. My question is can i use clear ( gloss / matt) color for topcoat using the handbrush. Thank you fro anyone's help.
Hello and welcome! Yes you can brush clear coat on but honestly the finish will he better with am aerosol as spreads the clear evenly and you have no potential brush stroke issues
a brief, simple & clear explanation that shows how informative you are! off topic note, have you positioned the light source below your face angle? usually, it gives a tiring face look.
Hello sir I'm beginner just tell me what to buy ? Acrylic pain for sure primer for sure how about fx tamiya clear coat ? I will be happy to let me know how to spend
I'm new and was referenced your channel, and this video easy to understand! My question is which Citadel paints would I be looking at off Amazon? I'm seeing base and layer, and still learning differences.
thank you! I'm just now learning how to paint Gundam kits and yours is by far more beginners friendly if I may say. Just the right info that I need! thank you
Amazing video, straight to the point with no fancy tools to mess around. I’ve been looking for a video that talks specifically about brush painting with Tamiya paints and good thing I found this one! Just one question, do you need to thin down Tamiya paints for brushing? I’d heard that they are already thin enough to use from the bottle.
I appreciate that you appreciate the presentation of this video lol. Tamiya paints are fairly thin out of the bottle but you can get away with thinning them a bit further. The metallics are thicker than non metallics so those would do better thinned a little bit more
@@Curioventura gotcha, I did a test run of Tamiya black without thinning and gave it around 3 thin coats but it still has a little bit of brush strokes, how long do you think I should let a coat dry and will a satin/matte coat hide the brush marks since they are pretty minor unless you bring it close. I’ve recently gotten back into the hobby after 4 years and plan on working on Amusing Hobby’s Last Production Ferdinand, Takom’s PLA Type 94 and the Tamiya 1/350 Yamato and would like to practice before I start. Thoughts on Ammo Mig paints and Vallejo? Are they thick or as thin as Tamiya? Sorry for the long question.
is that citadel paint a citadel base paint? I am starting to get into Gundam 1/144 kits and I originally used Testors acrylic kits and it went nice on my first one, but I think that they are old and I am having trouble mixing them. I have 3 iron-blooded orphans Gundams two of which are built and I think that the second one could be a good test for the citadel paints. What are your thoughts? Any suggestions?
The citadel paint tutorials are ok but they are showing tabletop board game figurine painting and I have tiny feeling that they are made of different materials.
Is that model your painting the side cowling of the gundam exia gashapon bust I happen to own two one fully built with led unit and another just the frame and armour peaces ✌️ the fitment is arse but nice model if you can be patient
Holy crap, a model maker who understands that not everyone has an airbrush! The amount of hate I have received in some modeling circles when i say i brush paint because i cannot afford and airbrush is frankly staggering.
Really? Dang I can’t afford a airbrush setup aswell, I got discouraged when I saw the lack of brush paint support. I also can’t afford 50 different spray cans. So I’m using 10ml Timiya bottles. Hope it works :/
They'll work. Try citadel paints as well; they're specifically made for brush painting . Thin them with a little water and you're good
@@everythingrc2324 you could pickup one of the new battery powered airbrushes. Some are actually quite good, and only cost around $50. Same price as a kit basically.
@@HE-162 huh must new a new thing I’ve never seen that. I’ll dry look into it man thanks for the information!!
You can get an entry level airbrush kit with compressor for $100.
I started Military Scale Modelling in the 1970's ... back then brush painting was ubiquitous AND an Art Form - there's nothing cheap or second rate about it compared to Air Brushing, but it requires a level of skill just like anything else. The fact that Brush Painting allows an entry level enthusiast to get into the hobby for less should not be confused with a lesser result ... it's the way it was always done, these days you just have more options.
Well said
@@Curioventura P.S Playing Devils Avocado on Tamiya Paint ... that scarring that was mentioned can in some cases work for you, particularly in the case of Scale Military Armour - Tanks for instance. A lot of the texture found on the surface of Tank Turrets - those with large area of cast steel - absolutely possess that kind of rough and ready surface texture. It is something that Modellers usually TRY to add for more realism by using things like Mr Surfacer etc. So ... depending on whether you want, need or require a finish that is slick and perfect vs not ... either of those paints may suit your task better than the other.
I know this video is 3 years old. So I hope you get this. I really appreciate your video. You brought something to my attention that I did not know. I have watched many videos on brush painting. I do not have an airbrush so I use brushes. I just got back in to modeling after 45 years. I wanted to get back in to it. I never have trouble with the build or or fabricing any part or detials. I have a problem with painting. I for got everything. I really thank you for this video. It was the best I've seen yet. I have subscribed and will loke forward to seeing more. Any kind. With the way you explain things any of your videos will be worth watching. Thank you for your time. You stay safe and happy.
Thank you so much for the kind words and even if it's 10 years later, I still respond to comments and appreciate them. I may do a revised version of this video in time. We'll see but thanks again George.
Thank you so much for this. Had been building models as a teenager at the end of the 90s without any clue how to do it. Models looked terrible but I had fun anyway. Now my wife gifted me a Haunebu II Kit to keep me entertained during long calls in the homeoffice. Your video has helped me tremendously in understanding how to get good results and even enjoy the mistakes I'm making as part of the journey of improving.
Good stuff mate. Cheers from Germany.
Vielen Dank!
Thanks! I am very new to gunpla painting and I was thinking to start with handbrush, and I found this video! You are surely very professional by the way you explain! I hope for another handbrush tutorial coming up!
Thank you and yes, there will be another video on it!
Greatly appreciate your advice, You saved a order that I thought I was gonna miss a deadline for. Thank you so much man.
Again, very underrated channel. Hope you grow big!
Finally, the perfect video for us new to the hobby. Much appreciated!
Wow thank you so much for the kind words! Glad this helped you
Seriously, I know this is an older video but please believe that it is still helpful. I applied your advice of using a soft brush and a soft brush stroke to three kits today. Thanks again bud.
Some very valuable advice, I used brushes for the models and with Tamiya, Vallejo and Testor paints. I learned the importance of brushes and smooth strokes and waiting patiently for the first coat to dry before applying the second coat.
I've had a LOT of problems with brush strokes in my paint (especially when using Tamiya). This has proved to be very helpful! Thanks!
That makes me 😊
Use retarder.
Thank You! Im just starting and this has been one of my biggest holdbacks is the painting. I just want to start simple and work my way up and this helps a million! Thanks for the brand name recommendations!
I really appreciate this video. I'm looking into brush painting some gunpla, but I've got no experience painting anything aside from canvas. Your video gave me a lot more information than i was expecting, but it'll definitely be extremely useful in helping me buy my supplies and determine my approach. Thanks a ton!
One of the best videos I’ve seen for new people like me into the hobby and I’ve seen a few.
Thank you!
Tamiya is brilliant with a brush, but you have to do things differently. 1) use acrylic retarder, this slows down the super fast drying of Tamiya paint. 2) Don't overbrush the paint. I notice you going over the same area many times, no need, Tamiya (especially if you use a little retarder) sucks right in to the details, leaving no brush strokes. Even if you slop it on. Further coats can be applied, just don't overbrush areas (this can reactivate the paint underneath), and preferably use some acrylic retarder.
All excellent points. Thanks for sharing them
I wish I knew about the retarder thing earlier... bought a Tamiya "flat flesh" color and while it is a bit too dark for my taste, it was very good for what you said - sticking to surface and "sucking into" the details. But it dries waaaay to fast and is hard to use without either constantly drawing small amounts of it from the bottle, or using said retarder.
I thought brush painting with acrylics was impossible. You are a true master!
I know this was from two years ago, just found it. Thank you for the very interesting video. I have two airbrushes but one needs to know how to brush with brushes. Judy in Nova Scotia, Canada
Glad this helped you Judy! I'm always around lol
those are good tips, thanks. I'm just getting back into model building and haven't got an air brush kit yet. I've gotten good results brush painting with Revell Aqua Color and Vallejo Model Air paints.
I cannot put into words at how useful this video is. For the 2 years I've been into painting models (well I've only painted 4 since I'm 14 and I don't have much of a budget with Tamiya models and paints) I've always wondered what am I doing wrong why does my finish looks so bad, this video is a super big help
Genuinely makes me feel really good this helped you! Thanks!
This video was exactly the knowledge I was looking for. Thanks alot. Really.
Thank you so much. Just started modeling again after 40 years and doing a lot of brushing .
Great video! I do a lot of miniature painting so I have plenty of citadel paints - the only issue I can think of is maybe the colours not being 'Gundam Official' but I do quite fancy priming my entire PG Freedom and attempting a metallic finish 😂
Just make em Gundam Official on your own hahaha
Thanks for this. I'm hoping to paint scale models with my citadel paints but am struggling with the colour conversions.
Been looking into a bunch of videos for this, is the most perfect one thank you very much for the information!
Thank you!
Excellent demo and explanation... thanks a bunch!
Finally, this is the video I was looking for since I am currently just starting on my painting journey and I couldnt get the technique of properly painting with tamiya acrylics just right. It always left a scarring on the paint and it rubs off while applying second coat too. THANK YOU SO MUCH FOR THIS VIDEO it helped a lot. Simple yet useful
When it comes to brushing I have been using mostly acrylic craft paint and testors enamel . I feel like enamels need to be thinned alittle for it to spread nicely and not leave brush strokes behind. Tamiya in general covers good but needs to be thinned a hair too.I also think it depends on the color. Whites, blue, and reds definitely need to be thinned or it will cake up on you. Silver or aluminum colors spread evenly without thinners.
Gonna go start painting after 2yrs of building gunpla. I gotta sub after watching that. Great tutorial. Idk if i can get citadel in my country, but the technique you taught will help me.
Thank you! Just about any kind of paint will work with these techniques
@@Curioventura so i guess i only need a good soft brush. And a sacrificial gundam kit. 🤣
I have been doing some hand brush painting on some kits for a while now, and it's been a trial and error. This video simplifies in a great way over others I've seen and have given me some great tips to improve my skill, thank you! I mostly use Vallejo, but I want to try citadel now. Keep up the awesome work!
Thank you, Im so glad this helped!
As a hint, even where your surface texture is not "just so", like with where you had some roughness with the Tamiya paint, you can still sandpaper the paint texture itself with a good hobby level "wet/dry" fine sandpaper pack you can get from Hobby Lobby.
Even your best sprayed on finishes need smoothing, and a good clear coat to cover any "repairs" done with sandpaper, etc.
Solid test! don't see side by sides often. I will say Tamiya needs to be thinned about 2:1 or 1:1 paint to thinner. I paint all my gunpla like this and you get much better results than here. Tamiya's X20-A has a mild detergent that will break surface tension and remove brush strokes right before your eyes. Adding a bit of their flat-base to the mix will give you nice matt finishes and make the paint adhere better to the plastic. Tamiya is my favorite, even if it requires more prep!
Thanks for all of the input! Great points 👍🏼
Nice tip! I'm living in Japan, just starting into painting, and wasn´t make much sense to me pay more on Citadel, as it is imported here, while Tamiya is home produced... :D
Thank you! Yeah I'd rather the Tamiya only because of my comfort level with it and the results are fantastic
Great video I own a airbrush but dont use it very often as its a hassle to clean and switch paints im a mostly ship modeler and mainly stick to tamiya as I find it a huge pain to try and find citadel paints for my ships as the names are all fictionalized. Amazing video taught me some new stuff thanks.
I'll keep it simple like the video... Great job explaining the basic process and the comparisons. Thanks for the tips. Give me hope. Subbed!!!
Thanks!
Useful video! It`s really helped me. Thank you so much
That's a very nice video, I'm just getting started on modeling, clarify it a lot. Thank you.
Thank you, glad this helped you
Very good tips on brush painting
Thanks for the video
been a lot of help for doing my first paint job. Thanks!
Thanks!
Excellent video, how would you paint stick and tissue free flight planes by brush and which paint to use. Thank you for your advice.👍👌👏
Thanks! After using Ez Dope to shrink the tissue, you can lightly brush the plane. Tamiya paints work well for this. I have limited knowledge on stick and tissue builds but I do know others have used Tamiya and other model paints for this with success
Thanks for the video. Yes, not all of us can fit an airbrush into our budgets...I'll also be using craft acrylics for the same reason & from what I've seen on videos, I'll have to prime a couple of coats then 2-3 thinned paint coats handbrushing. I guess 24hrs is cure time before next coat of paint eg Deco Art Acrylics?
Those should be dry within an hour to 2 enough for another coat
@@THEleatherface24 Thanks
First off, Thanks for this video. OK, I'm building a 1/32, 1/48 scale fighter plane what would be best size brush and type paint to let's say paint wings of plane? Thanks
Thanks. Something wide, soft and I'd go for thin coats, multiple layers
This was a GREAT video. I have been into GUNPLA for about year now. 30 kits in and wanting to try painting. Bene pretty confused though and this video helped me a lot!
This is really good video! Thumbs up! And i really appreciate the recommendation because thats what beginners need.
I once was a beginner and knew the exact things I wanted to see and be exposed to. Thanks for mentioning that and ill continue to do my best to help 😁
Thanks man,this was the only video I understood, every tutorial was too complicated even though it was written "For beginners" right in the title.
Thank you and I'm glad this helped you!
what kind of Citadel paint are you using? There are base, layer, technical, contrast, shade, etc. What are the differences? What do you use to clean your brushes? Where do I find the Grumbacher brushes?
Great video, i just want to ask do i need to use thinner for the tamiya acrylic paint, im planning to use the brushing technique to repaint a bus model do you have any tips on doing that?
Thanks and yes, a little thinner would be ideal. Multiple thin coats is the way to go
@@Curioventura does it make the paint smoother and not show the brush marks?
Any recommendations or any coating to spray on the paint so it doesn’t rub off
Any acrylic clear in a can would work but the spray patern wouldt be as fine of a mist as you may want.
Very nice video, thanks! Do you have any advice with regards to Vallejo Model (not Vallejo Game Color, or Vallejo Air). Would you put it near the Tamiya side, or more on the Citadel side?...
Thanks! They work well, kind of in the middle of Tamiya and Citadel as far as viscosity out of the bottle. They're a good choice and it's solely up to your preference
Trying to paint my apple pencil into looking like a #2 pencil. Can i used a 2k clear over the acrylic paint to seal everything off?
Yes. I've done it numerous times with no issues. Just make sure the surface is clean and you're good to go
Brilliant video. I'm going to start using citadel. I don't have the space or cash for an airbrush and I've tried Tamiya. What's your opinion on a base coat using a rattle can then a top up using the citadel paints? I like making tanks
Thanks! I'd be careful using a rattle can. The spray comes out thick and the last thing you want is to lose detail on the model because of excess paint filling up those details
@@Curioventura I have heard that if you place it in warm water it makes it finer? But regardless I'm going to get some citadel paints. Thank you 😊
Quick question. The citedel looks better, but the other paint in shiny. So with the citedel, looks like you will need a clear coat, but not with the other. Is that right. I’m planning on building the supernatural impala. What would you suggest. Wish o could just find one already painted, but most kits come unpainted
The paint I used for the Tamiya was satin black so it has a slight sheen to it. I'd advise clear coat for everything that's going to be handled a lot
Do I have to prime the parts I want to paint with primer? I just want to add small details that would be from stickers and don't really want to buy an entire can of primer just for these small things. It's for a hg strike freedom revive if that matters
No you don't have to. Just make sure you wipe the pieces down with alcohol first so you're applying the paint to a completely clean surface
@@Curioventura Oh thanks! I was debating for a while now whether or not to buy an entire can of primer and paint for such small detailing
Hey is there a way to paint translucent coloured paints onto clear plastic without using an airbrush setup? I have a car model that came with lights that are all clear and the taillights need to be a translucent red.
If there is a way, im not too sure how to do it with the types of enamels, lacquers and acrylics we generally use. I know how to do with the cheap water acrylics you get from hobby shops but that's an entirely different thing I'd have to experiment with
@@Curioventura If you ever do a video on that I’d love to see it. I wish kit makers would put the effort into making pre coloured clear pieces.
I know you can dye them. Search for videos on here but I know it's not hard to do
Thanks from a brand new subscriber! How much time is ample time between coats? I build model cars almost exclusively, so I would appreciate any advice about brush painting a large, smooth surface, like a car body, please. Thanks again!
Depends on the paint you're using but if it's acrylics, about 20-30 mins is sufficient.
Thanks!
Excellent video my man. I don't wanna invest on an airbrush just yet. But I want to be better at painting and customizing my models. The one question I have is on base coating. How do I do a base coat to make sure the paint sticks besides washing and cleaning the parts?
Thanks! You can wetsand the pieces with 1000 grit sandpaper. That will ensure good adhesion.
Ive used some random acrylics for a long time and they work fine imo but i started using tamiya and theyre good too. For me tamiya paint dries and looks less shiny. Both are good so it doesnt really matter, whatever works is fine.
Should I prime before using the citadel paints or are they mixed with primer by default to use on my kit before adding colors/details I want?
No need if brush painting really. Just make sure the surface is prepped right and has no oils from your hands on it
Thanks for the information. What is the thinner : paint ratio for tamiya?
I do 50/50
@@Curioventura thank you
question. i bough a paint(any color) out from hobby shop. its been sitting there for a while and the paint pigment and thinner seems separated. whats the proper way to prepare my paint
I want to hand brush a 1:350 warship model, especially how to paint the hull. To get this wright is my question ? Should I use little rollers or is it possible to paint with a pencil? Thank you.
Should you still primer a gunpla kit before hand painting or just go straight to it. Im hella new to all of this
No need. Just make sure the surface is wiped down with alcohol and you're good to go
How do you clean up your brushes in between coats and then after you’re completely done using them?
Alcohol. I shake the bristles in it,dry them and then make them into a point to let them dry when I'm done
You just earned a subscription my guy, awesome stuff!
Thank you!
One question about the Tamiya.. I know you mentioned the bubbles already but what about the parts that still have that wet look, even though it's completely dry? Any idea what causes that? Is it from painting too thick of a layer?
What kind of brushes do you use for tamiya paints?
are you using water to clean your brush after using the tamiya paints ? i ask this because i always have difficulty with adding water to them as i have always been led to believe that they are solvent based and not water based paints
90% isopropyl Alcohol. Water is not great to use with these paints. Only thin them with either the Tamiya thinner or as I use, 90% iso
Any need for priming with brush painting? Getting tired of gundam markers and probably gonna give this a shot
Not really
Curioventura so just straight on bare plastic and I should be good?
I've yet to see anyone prime for brush painting but if it gives you peace of mind to do it, then go for it 👍🏼
Would love to try Citadel for brush painting military models but they have such weird names, how do I know what colours are equivalent to the Tamiya colours?
Just pick the colors you want. They're great on their own without direct comparison
Do you find that citadel has better coverage or opacity that Vallejo model color?
Did you use thinner for the Tamiya paint?
Regular isopropyl alcohol, yes
Hello I’m just wondering if you have to sort of prepare the paint before use like I have Tamiya acrylic paints and do I have to shake it before use?
Yes stir it shake well.
If I thin my Tamiya acrylic paints before brush painting, does it work any better? Just curious. Very helpful video.
Itll make the pain flow better but I'd go little by little with adding the thinner till you hit the consistency you want
@@Curioventura Do you have a recommendation on where to start? I have the pipettes for mixing my paints. Would you say 3:1 paint to thinner would be a good place to start or would that be too much thinner?
I'd say try less at first as you can always add but you can't take away. Let me know what ended up working for you so I can pass that on along here 👍🏼
@@Curioventura okay I'll let you know. I guess it's alot of trial and error. We'll see what works.
Do you have recommendations when it comes to a primer for hand painting?
Question .. how long for tamiya paint to dry ?? And .. usually how many layer to paint to get the best result ?? Sorry quite new in this👉👈👉👈
Usually 2-5mins. However many layers is needed for color coverage. 2-3 works. No problem, ask away! I'm here to help 👍🏼
What do I need to do, If I want to make custom figures on marvel legends? Do I need a technique before and after painting tips? Cuz I just have tried to paint on figure with model color paints and after drying the paint comes easily off. Did I did maybe something wrong? Or the paints are not good enough for plastic? I want to know!
The surface of the figure needs to be completely wiped down with alcohol so you have a clean surface. Then you need to primer the figure. 1-2 light coats. After that, apply your paints. Once the paint is dry, spray the figure with a protective clear coat. That should give you a good paint bond however you don't want to pose the figure excessively after any paint job because you'll stress the paint where the joints are. You can do some clearance sanding in the joints however to give them just enough space so when paint is applied, it won't rub. You also Sand the entire figure with 1000 grit to give the paint something to bite onto as well before you paint. I hope this helps
Thank you for this. There aren't enough videos covering hand painting
Glad it could be of help!
hello- apologies if this has already been answered, but will any brand of acrylic paints work fine with gunpla or do i NEED to buy the more expensive brand paint sets?
i already have my kolinsky brand brushes, tamiya brand panel liner ink, godhand brand nippers and so on- my wallet is really feeling the pain and my wife is starting to grow concerned with my new hobby lol- im trying to save a buck where i can when i can and was wondering if any water based acrylic paint set will do or do i need citadel or whatever
What's the best primer to use with a hand brush?
Good prep work lol. I usually don't prime with brush painting ad the paint goes on thicker with it and the more layers you put on, the more you run the risk of filling in details and panel lines. Just sand the pieces down with 1000 grit and paint if you want good adhesion but don't over sand as you'll run into the same issue with too much paint.
@@Curioventura Ya. That's what I've run into. Loosing detail. But I also tried thinning it way down. And it actually kind of worked. I'm using Tamiya Super or Supreme primer.
Habe den Kanal gerade gefunden. Ich finde es ist alles super erklärt. Sehr informativ und gut für Anfänger. Gleich abonniert. Jetzt hab ich ein neues Hobby.
Just found the chanel. I think everything is well explained. Very informative and good for beginners. Subscribed right away. Now I have a new hobby.👍👍👍
vielen Dank!
Great video! I was searching this kind of video for like month, because i like to start painting with brushes. Could you make or show any video with military models done by brush? With any tips and tricks included.
Great video again! Greetings from Lithuania 🇱🇹
Glad this helped and I'll see what I can do!
is it okay to panel line using tamiya panel line after hand painting my gunpla using tamiya acrylic paint?
Yes it is but just make sure you're using gloss paint or clear beforehand. It'll spread if it its applied to flat paint. You can always top coat with semi gloss or matte afterwards
I always use Vallejo paints. Ive got no complaints, besides they dry too fast so you have got to make a wet pallette for them
I almost gave up on hand painting till I saw this video. Thanks man
What is the best brush to use to get that air-brush look in the video? any recommendations other than the one you mentioned in the video? I was experimenting with citadel after watching your video and got some brush strokes on the plastic, so definitely was using the wrong brush. great video, thanks.
Anything with real soft, medium length bristles and a light pressure to feather the paint. Also, try thinning the paint just a little to get a looser viscosity
Do you think I can use it for diecast metal ?
I'd use enamels for die-cast
Hello sir. Im new to gunpla but i want to stop using can spray top coat. My question is can i use clear ( gloss / matt) color for topcoat using the handbrush.
Thank you fro anyone's help.
Hello and welcome! Yes you can brush clear coat on but honestly the finish will he better with am aerosol as spreads the clear evenly and you have no potential brush stroke issues
@@Curioventura thanks a lot been looking this answer mostly people dont know bcoz no one tries topcoat on hand brush
Lmk how it works out for you
Could i use the acrylic paints i use for painting pictures?
As long as everything is primed so as to give those acrylics something to bite on, sure
Great information on basics for use brush even re learned my bases for use and I will wait see next video for Airbrush still no much experience
a brief, simple & clear explanation that shows how informative you are! off topic note, have you positioned the light source below your face angle? usually, it gives a tiring face look.
Thanks! Yeah lighting wouldn't have mattered that much as well, i was pretty dead tired filming this hahaha
Great video, which primer did you use?
Hello sir I'm beginner just tell me what to buy ? Acrylic pain for sure primer for sure how about fx tamiya clear coat ? I will be happy to let me know how to spend
Great job helped a lot. What do you think about Vallejo acrylic paints?
Thank you and they work well. Just have to thin them a bit with water
I'm new and was referenced your channel, and this video easy to understand!
My question is which Citadel paints would I be looking at off Amazon? I'm seeing base and layer, and still learning differences.
Awesome and I'm glad it helped you! Base would be the start
what kind of brush are you using? I just got the citadel paint
Windsor and Newton 0000 brush
thank you! I'm just now learning how to paint Gundam kits and yours is by far more beginners friendly if I may say. Just the right info that I need! thank you
what specific brush should I got for if I'm painting gunpla? I tried to google yours but couldn't find it
Check out Windsor and Newtons soft bristle brushes. It's best if you go to an art store and see them in person
Amazing video, straight to the point with no fancy tools to mess around.
I’ve been looking for a video that talks specifically about brush painting with Tamiya paints and good thing I found this one!
Just one question, do you need to thin down Tamiya paints for brushing? I’d heard that they are already thin enough to use from the bottle.
I appreciate that you appreciate the presentation of this video lol. Tamiya paints are fairly thin out of the bottle but you can get away with thinning them a bit further. The metallics are thicker than non metallics so those would do better thinned a little bit more
@@Curioventura gotcha, I did a test run of Tamiya black without thinning and gave it around 3 thin coats but it still has a little bit of brush strokes, how long do you think I should let a coat dry and will a satin/matte coat hide the brush marks since they are pretty minor unless you bring it close.
I’ve recently gotten back into the hobby after 4 years and plan on working on Amusing Hobby’s Last Production Ferdinand, Takom’s PLA Type 94 and the Tamiya 1/350 Yamato and would like to practice before I start.
Thoughts on Ammo Mig paints and Vallejo? Are they thick or as thin as Tamiya? Sorry for the long question.
Use a softer and denser bristle brush and don't press down hard when applying the paint. See if that helps. Both paints you mentioned are fine
@@Curioventura note taken, thank you for taking the time to reply. Most tutorial channels don’t, can’t wait to get started.
is that citadel paint a citadel base paint? I am starting to get into Gundam 1/144 kits and I originally used Testors acrylic kits and it went nice on my first one, but I think that they are old and I am having trouble mixing them. I have 3 iron-blooded orphans Gundams two of which are built and I think that the second one could be a good test for the citadel paints. What are your thoughts? Any suggestions?
The citadel paint tutorials are ok but they are showing tabletop board game figurine painting and I have tiny feeling that they are made of different materials.
Yes they are base and definitely use them. They are far better paints then testors
Wait, you can brush paint tamiya acrylic without thinner?
You can lol
@@Curioventura dang...
What brush are you using? Thanks for the tips and info
I said the exact brush in the video. Im away from my work area now to tell you this second
th-cam.com/video/5u_2FJQZ84s/w-d-xo.html
Thanks, I didn't catch the name at first
Nice Vid! May i ask did you primed the part?
Is that model your painting the side cowling of the gundam exia gashapon bust
I happen to own two one fully built with led unit and another just the frame and armour peaces ✌️ the fitment is arse but nice model if you can be patient
@maxbuckley9762 nope, it was from a 1/60 exia but good guess lol!
Can tamiya acrylic thin with water?
90% or 70% isopropyl Alcohol. I wouldn't use water