Titanium lug nuts are perfect 👌😁 Titanium lug nuts are 29% stronger and nearly 50% lighter than steel which results in a decreased rotational wheel mass. I know where can you get it at a great price 😁😁
Do they by any chance have purple cap ones? I been looking everywhere and cant find where to buy them. Only place i found them was ebay but at $68 which I know at that price they are kncok offs
I don't believe so, unfortunately. I would definitely avoid ebay. The ammount of fakes on that site are vast. The last thing you want is to have lug nuts sheer off when driving. The caps come out easily and could be painted or anodized to whatever color you desire.
If i’m running normal wheel spacers on my G with my Work wheels will I have to take off the caps or no? Also are these the extended versions or normal ones? Thank you
Depending on your spacers. It comes down to how long your studs are. Are they built in to the Spacer or are the spacers slipped over the lugs studs? If the studs are extended you'll probably have to use these lugs without the caps. If they are standard sized lug studs on your spacers, the caps can be left on. These studs are longer channeled than standard lug nuts by at least double the channel length.
@@carlos889574 If your studs are longer than OEM . I don't forsee these lug nuts fitting with the caps on. But extended studs vary so much, I would contact the company (Or SubiSpeed) to ask what the allowable length is for studs on these lug nuts.
@@fidelj3025 STI wheels are tapered. They torqued well. And held torque. My Freind bought my STI and he's had zero issues. The STI wheels are Enkei, which makes aftermarket wheels. I see no reason they would make the seat any different for the STI wheels.
@@Mikey6048 yes all stock wheels are tapered but the if you compare the stock and aftermarket lug nuts they both taper off differently. Stock is a wider taper vs the narrow taper of the aftermarket and won't seat properly. The narrow taper of the aftermarket lugs will have a small gap from the wider taper of the stock wheels
The sockets are low profile "Thin walled". To make sure they work with all standardized rim lug nut cavaties. Unfortunately, I do not own this vehicle any more and am not able to measure the sockets. I apologize for the inconvenience. I would contact "SubiSpeed" and ask them. Thier customer service is pretty helpful. And they might be able to get the answer you seek. If you do get an exact answer. Please update this post, and I will add this information to the description section of this video for other viewers.
You'll need 14x1.25 thread pitch. www.evasivemotorsports.com/store/product/project-kics-r40-iconix-black-14x125-164-locks-red-cap/ Or Part number KICS-WRIA15KR
@@Mikey6048 I change the oem lug bolt to a wheel stud size 14x1.5 lug thread now would the project kics r40 fit the oem wheels? cause project kics said it don’t fit oem wheel but I feel like the oem gr supra wheel are like aftermarket wheels
@@teamhonzilla I don't see a reason why they wouldn't fit. It's not like these Lug nuts are any wider than factory Acorn style nuts. They actually appear slightly skinnier. You won't actually know unless you order a set, since you altered the OEM spec slightly. I hate to say order a set from a company that allows returns, and see if they fit. I personally feel that they should. The lug nut gaps in the wheel should be pretty accommodating. But I can't guarantee that information as accurate.
@@hectorgarcia8744 Is the material right? Meaning the material of these lug nuts? If that's your question. Yes these are Forged Chromoly Steel. They are incredibly strong.
Awesome vid! Thinking about getting a set of these!
Titanium lug nuts are perfect 👌😁 Titanium lug nuts are 29% stronger and nearly 50% lighter than steel which results in a decreased rotational wheel mass. I know where can you get it at a great price 😁😁
They look pretty damn cool
They are very nice lug nuts. So far they have proven to be very strong and haven't marred the wheels.
Dont lose that card because thats the code for your lock key and youll have to provide that if you ever need to order another key
Thank you. I didn't know this. I'll let the guy who bought my STI know. Thanks for the information.
Project mu has the same ones 🔥🔥
Do they by any chance have purple cap ones? I been looking everywhere and cant find where to buy them. Only place i found them was ebay but at $68 which I know at that price they are kncok offs
I don't believe so, unfortunately. I would definitely avoid ebay. The ammount of fakes on that site are vast. The last thing you want is to have lug nuts sheer off when driving.
The caps come out easily and could be painted or anodized to whatever color you desire.
Omg,110gm gain!! That will make me lose 1/4mile n runs more fuel. No heavy breakfast!
But seriously as he said, dont lose the key socket!
If i’m running normal wheel spacers on my G with my
Work wheels will I have to take off the caps or no? Also are these the extended versions or normal ones? Thank you
Depending on your spacers. It comes down to how long your studs are. Are they built in to the Spacer or are the spacers slipped over the lugs studs? If the studs are extended you'll probably have to use these lugs without the caps. If they are standard sized lug studs on your spacers, the caps can be left on.
These studs are longer channeled than standard lug nuts by at least double the channel length.
@@Mikey6048 thank you so much and yes the 15mm spacers are extended. But if I would get non extended lugs they would fit fine with the caps correct?
@@carlos889574 If your studs are longer than OEM . I don't forsee these lug nuts fitting with the caps on. But extended studs vary so much, I would contact the company (Or SubiSpeed) to ask what the allowable length is for studs on these lug nuts.
@@Mikey6048 thank you so much
Do u think this nut lugs will fit perfectly with the sti wheels ?
They work well on these STI wheels. These are the 2015 version. Lug nuts are basically universal as long as you get the right thread pitch.
@@Mikey6048 the taper on the end of the lug nuts are meant for after market wheels not stock.
@@fidelj3025 STI wheels are tapered. They torqued well. And held torque. My Freind bought my STI and he's had zero issues. The STI wheels are Enkei, which makes aftermarket wheels. I see no reason they would make the seat any different for the STI wheels.
@@Mikey6048 yes all stock wheels are tapered but the if you compare the stock and aftermarket lug nuts they both taper off differently. Stock is a wider taper vs the narrow taper of the aftermarket and won't seat properly. The narrow taper of the aftermarket lugs will have a small gap from the wider taper of the stock wheels
Hi...can you tell me, what is the outside diameter of the 2 socket keys. I have the Rohana RC10, the lug nut hole diameter is only 0.900". Thank you.
The sockets are low profile "Thin walled". To make sure they work with all standardized rim lug nut cavaties.
Unfortunately, I do not own this vehicle any more and am not able to measure the sockets. I apologize for the inconvenience. I would contact "SubiSpeed" and ask them. Thier customer service is pretty helpful. And they might be able to get the answer you seek.
If you do get an exact answer. Please update this post, and I will add this information to the description section of this video for other viewers.
Would they fit gr supra oem wheels? Thanks
You'll need 14x1.25 thread pitch.
www.evasivemotorsports.com/store/product/project-kics-r40-iconix-black-14x125-164-locks-red-cap/
Or Part number KICS-WRIA15KR
@@Mikey6048 I change the oem lug bolt to a wheel stud size 14x1.5 lug thread now would the project kics r40 fit the oem wheels? cause project kics said it don’t fit oem wheel but I feel like the oem gr supra wheel are like aftermarket wheels
@@teamhonzilla I don't see a reason why they wouldn't fit. It's not like these Lug nuts are any wider than factory Acorn style nuts. They actually appear slightly skinnier.
You won't actually know unless you order a set, since you altered the OEM spec slightly. I hate to say order a set from a company that allows returns, and see if they fit.
I personally feel that they should. The lug nut gaps in the wheel should be pretty accommodating. But I can't guarantee that information as accurate.
@@Mikey6048 Thank you for the fast reply 🙏
For $300 lug nuts i hope this never get scratched right😂🤦♂️🤷♂️
If you're careful you should be fine.
Are steel crosmoley right???
I assume you mean Steel Chromoly? And "Right" meaning what exactly?
@@Mikey6048 yeap sorry i write it wrong
@@hectorgarcia8744 No worries. What's your question though?
@@Mikey6048 about the material
@@hectorgarcia8744 Is the material right? Meaning the material of these lug nuts? If that's your question. Yes these are Forged Chromoly Steel. They are incredibly strong.