Complete Paint Job with the SprayIT R500 LVLP spray gun and small compressor
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- In today’s video I do a complete paint job using the SprayIT R500 low volume low pressure gravity feed spray gun and a small 21 gallon compressor on a 3rd Generation Chevy Camaro and show you that it is possible to paint your vehicle using a LVLP spray gun and a small compressor at home in your garage.
Get yourself some merchandise from the UPK website: www.undergroun...
Grant 7 Oh My clear: buycustompaint...
R500 spray gun:amzn.to/3MMNLnN
The last parts of the video was shaking a little but I still could see the shine 👍🏾👍🏾 “ When Grant 7 & The King together boy you know you in trouble “ 💪🏾💪🏾
Appreciate you Sprayway I honestly don’t know why the end of the video started tweaking 🤦🏽♂️
Two of my favorite TH-cam Channels, you all have inspired me to bring my old rides back to life, and I plug yall every chance I get to all my other car buddies...Thank you!
@@torreyt948 I appreciate that and hope the channel continues to help!
Man one of my favorite youtube channels
along with spray way customs . Hope my ride comes half as good as y'all's paint jobs. Keep up the fine work brother. Appreciate all the useful content.
@@allenlackey116 I appreciate that Allen and I know your project is going to turn out great!
Never painted before, but from the video it looks like you mix up one batch of clear and do the entire car. How much of a car can you do with a single batch of clear and how much clear do you need in total, a gallon?
It really depends on the clear you’re using and the mix ratio also what you’re doing when you’re painting the car as far as if you’re doing the inside and outside of the car, so a gallon is where you want to start but you may need more
THANKS ONCE AGAIN YOU CAME TO THE RESCUE,BEFORE I HAD PUT ALL MY CLOTHES ON BACKWARDS,BUT NOW I UNDERSTAND
@@lesliwells5433 glad I could help 💯
Man I've learned soooo much from your channel brother. I hadn't painted a car in 30 years, but I've got a project truck I've been building and I'm almost ready for paint. I've shot the primer using my sprayit, was curious about the grant 7, I've got a few test panels (hoods & fenders) I'm going to practice on. But just wanted you to know I've really enjoyed learning from ya.
Glad I could help in anyway possible Mark and you’ll love that Grant7 Oh My clear! I appreciate you checking out the videos!
ME AGAIN, UPK,the people's champ,I need to know how long did it take on a small compressor like yours to paint that whole car from start to finish?
Took me a couple hours to do the 2 tone from start to finish
I started back in the 70s with a Craftsman 30 gallon compressor and working outside paint and bodywork.
You don't need all the high dollar stuff to get it done just gotta be resourceful .
Nice job...
Thanks Larry I appreciate that and appreciate you checking out the video and you’re absolutely right and I do my best to show people that want to do this kind of work that they can do it and they don’t have to break the bank doing it!
I sincerely appreciate this video and comments from you both, I'm a regular guy in the garage, I would suspect it would make perfect scene to use a very large compressor if I was working in a production shop, but at home probably not.
P..S your shop is perfect size, very cool.
You are a great teacher. The hum of the compressor the sway of the spray almost hypnotized but then real action began with the Grant 7 . I’ll practice being able to spray the clear like you but we all know you are the King no one else can move the way you do! Shake , rattle and roll. Sometimes laughing is therapeutic! Thanks my friend
😂😂😂 thanks Ralph I really don’t know what happen to the video but I will make sure it doesn’t happen again lol…I appreciate you checking out the video 💯
IT WAS TOO MUCH SAUCE FOR THE CAMERA!!!! LOL..... but if everyone just hits pause, you can see the car clear.... UPK did his thing as always
Lol Thanks Grant I appreciate that and I’m gonna put up a short video of the Camaro outside
Yeah that’s what I was gonna say too. Oh my shocked the camera!
@@wcpportfolio 😂😂😂
I just sprayed my first panel with this gun, and it is amazing!! It lays down so smooth!! You have to keep it moving so you dont run it. Im used to slower passes to get my shine with my HBLP guns. With this gun, you can make fast passes and still get a great shine with no dry spots. It uses way less paint than my Devilbis GTI, and almost no orange peel. LOVE THIS GUN!!!
Awesome to hear your experience with the spray gun 💪🏾💯
That's good to know. I'm used to using Iwata and Devilbis. I just bought the A610 spray gun on Amazon. I'll make sure I keep this in mind.
New to the channel …. I like how you and trigger man have shown me you can put base on a bit heavy ! .. im sure it will help keep everything smooth 💪🏻💪🏻😎
@@lawncuttingplusdelta I appreciate you subscribing to the channel and I hope it continues to be helpful to you 💯💪🏾
Are you getting an entire coat with the paint pot that comes with the gun or did you find a bigger one? I just don't get very far with that stock cup. I don't know how I'm going to get a wet clear coat if I have to stop and refill the cup. Signed confused first time rookie, Steve p.s. I have the a610 aeropro
I stopped using the cups that come with the spray guns and started using disposable cups which can be really helpful when doing a overall paint job, I’ll try to do a video demonstrating how you can go about doing it
You worked your compressor to death on the black Camaro. But great job.
Question: do you find the R500 gun is a difficult gun to use because it is an LvLP? User of the gun is to go slower. And would you paint a urethra paint over a 1 k primer from a spray can? Thank you for video
Thanks Robert I appreciate you and I don’t think it’s difficult to spray with because of it being lvlp also I have painted urethane over a 1k spray can
what's up UPK,i am a little confused on the difference between basecoat balancer what it's used for how to use it, explain basecoat blender, explain basecoat binder i think it is intercoat for candies and wet beds,please explain and do you use all 3
@@lesliwells5433 it’s just clear base coat that can be used for custom work and for blend work and I use blender from time to time depending on the job I’m doing
@@UndergroundPaintKing this is confusing, regular basecoat paint,basecoat balancer,basecoat binder,and basecoat blender
@@lesliwells5433 those are what go into a base coat to make a base coat
ALL THESE BASECOATS MAN ,I JUST MIGHT HAVE TO BUY ME A BASECOAT FOR THE WINTER,HEYIT'S A COAT,HA HAHHHAHAHHHH
@@UndergroundPaintKing THANKS I HAVE IT NOW BEFORE,I HAD ALL MY CLOTHES ON BACKWARDS,I AM GOOD NOW,I UNDERSTAND
UPK I am going to try lowering my pressure down to 30psi when spraying Grant 7 I am still struggling with it has great shine just getting solvent pop on flat panels think I am laying it on way to heavy Thanks for content
You may need to give a longer flash time instead of lower the pressure but try both and see if you get better results
ain't gonna lie to ya the prep job looks like you could do it better though KING
@@pnuematicshc6376 I appreciate you ❗️
I wish your camera wasn’t messing up, cause I wanna see how it really looks?
@@Mark-um3hm if you go to the end of the video it will have part 2 for you to click on
Thanks man, this video will help me and my boy paint his car.
@@seanhall4098 you’re welcome and good luck to you 💯💪🏾
Nice job UPK - I always liked that body style. Like SprayWay said it was a bit shaky at the end but the paint looked great - have a good week my friend :)
Thanks Jerry I appreciate you as always and don’t know what caused the video to become shaky at the end 🤦🏽♂️…have a good week my friend!
@@UndergroundPaintKing 👍
That's some expensive clear...but I want it for my C10 project... I'll use something more budget friendly for all my other projects, but I want that truck show quality... awesome Camaro though...turned out nice...🖖🏿😎👍🏿
It’s not cheap but definitely worth the money Road Rash!
Looks like it... I had to keep pausing the video to look at still shots, lol, but that looks good... that's the shine I want on my truck, like it's coated with a layer of glass...
@@Road_Rash that was no cut or buff also
Even better! But I bet if you did cut & buff it, it would look like a black mirror... pretty damn close now... a slick black paint job will never go out of style, no matter what trends come & go, but they are a bit over done these days, especially when it comes to motorcycles, I'd love to see it in a nice custom metallic, or pearl, with some graphics of some kind...turn that joker into a sure 'nuf panty dropper! Lol!
@@Road_Rash 😂 I agree, black is definitely over done these days!
The paint job was to clean that the camera got fucked up recording it
😂 appreciate that Stoneyisland💯 I don’t know what happened with the footage at the end but I did a part 2 so that you could see the finished product 🤘🏾
I bought the sprayit 2 gun kit from watching your videos. Thanks for sharing knowledge and I hope they hook you up for pushing their product.
Thanks M C I appreciate you checking out the videos but they definitely not hooking me up lol but as long as my people winning I’m good!
Spray it seems to do a better job than Campbell hausfeild what you think
If I had to choose I would definitely go with the SprayIT Joaquin
great job as always brother LVLP for the win
Thanks bro I appreciate you checking out the video 💯
Spray it with the Sprayit! 👍 I’m amazed at the minimal over spray that LVLP has. I always love it when the clear goes on. 😁
Thanks for another great video. 👏
Thanks I appreciate you Blue2824 and I agree that watching clear go on is satisfying 💯
I noticed the very low overspray too. My 1st time on the channel but not my last!
@@barnes29510 yes very low on the overspray!
Are you from Tampa and do you know AJ Mitchell
No I’m not Tampa and don’t know AJ, sorry!
I been wanting to get my hands on some grant 7 !! Where can I get this wet wet at !!
Go to BuyCustomPaint.com to get yourself some Oh My Clear Fernando💯
First!!!! And I appreciate your support---- THE LVLP KING STRIKES AGAIN!!!!
Appreciate you as always Grant7 and you have a great product on your hands💪🏾
why is your video shaking so hard i cant even see your nice paint job at all lol ?
I don’t know what happened when I uploaded the video to TH-cam but there is a part 2 and the video isn’t shaking lol
What size small compressor you used
21 gallon compressor
I just painted my front end and engine compartment after watching your Sprayit videos and it came out slick! Thanks UPK!
Thanks Luis I really appreciate hearing success stories and appreciate you checking out the videos!
@@UndergroundPaintKing you're welcome! Keep it up with the videos!
@@luisrivera3440 I’ll definitely keep the videos coming
@@UndergroundPaintKing What model gun is that for the clear? Also why must you put out such great content?😂. Keep it up bruh💪🏾
Single stage with this gun.. what would you run pressure at??
It really depends on the material you’re spraying to determine what pressure to run and I would do test panels before spraying your actual project to have everything dialed in like you want. Here is a video I did on a single stage paint job using this spray gun
th-cam.com/video/OkAbRWjHwOc/w-d-xo.html
Oh my!! Turned out great! You paint like a machine, smooth!
Thanks Garage Hack I appreciate you checking out the video…I’ve had a few people tell me I paint like a robot but I think that’s a good thing lol!
Why not start at the top then work your way to the bottom
You can start at the top if you like, I like to start at the bottom just in case something in my spray gun breaks free from another paint job that I might have done, that way the trash that might land in the paint job is at the bottom and not the top in a noticeable area. Just something I have learned over time but starting from top to bottom is perfectly fine
That R500 is a great gun! Do you like it?
I definitely like the R500 Robert
you paint the tires and everything on that one bruh
I didn’t paint the tires, just the car! I appreciate you checking out the video 💯
So when the compressor kicks on do you need to stop spraying and let it catch up? Will pressure get too low ? When will I know to stop spraying and let it catch up if I’m using like a 26 gallo harbor freight . Good stuff
You should be able to spray consistently with this lvlp spray gun because it operates at a lower cfm requirement so if the compressor kicks on you can still keep spraying
@@UndergroundPaintKing thank you ! Your videos are great . You make it easy to understand. Thanks bro
@@ksduathlete you’re welcome and I’m glad I could help!
Another one out of the park what's up with the shaking
I don’t know what caused the video to shake like that but I’m going to post a short video of the finished product of the Camaro…I appreciate you rocking with me Arnie!
Do you use a single stage paint very often?
I don’t spray single stage often Robert
What adapter from harbor freight did you use
This video here should help with that James
th-cam.com/video/VsYHUuriffU/w-d-xo.html
I dont know if its just my phone or the video but the last lil bit its shaking bad upk
Mine too!
Yeah I don’t know what happened with the video and why it’s doing it…it definitely didn’t upload like that 🤦🏽♂️
@@UndergroundPaintKing its ok man stuff happens i always enjoy ya videos u & Sprayway only painters i watch
@@terryburton971 I appreciate that and I’ll figure out what happened
That was a good test for the lvlp/sm. Compressor set-up! Spraying some high solids clear...
Just got to the shakey part now, getting dizzy😳😂looks like you are painting during an earthquake!
😂😂😂 I don’t know what happen to the footage because it definitely wasn’t like that when I uploaded the video 🤦🏽♂️…I appreciate you checking out the video Bear Budget Garage!
I can’t see nothing that looked good at the end this should of been in R. Kelly‘s video leg shaking song
😂😂😂 I have part 2 of this job
Here is part 2 th-cam.com/video/qK8ZenH9dKc/w-d-xo.html
Very well done. What brand and how much paint did you used? Thank you
I used shopline on this project which is a ppg product and it was about a gallon of sprayable material
Hey man! I painted my SUV in my garage it came out pretty good lvlp got the job done for sure, thanks for your help and keep up the good work 👍👍👍
That’s what I like to hear Claudio…I appreciate you checking out the videos and I’m glad they helped!
Quedó como de fábrica, o sea de show.
Gracias Luis, ¡te agradezco que hayas mirado el vídeo!
thanks for doing what you do. i just got a car to restore, and you're giving me hope that i can repaint without breaking the bank.
Nice 💯 you definitely can restore it yourself 💪🏾
What black base did you use? Looks great! Can wait to do the same; appreciate you taking the time to share your techniques; really enjoy your videos & reviews
Thanks MrDasilvaf I appreciate you and the base I used was a shopline black base which is a ppg product…I hope the channel continues to help out!
Hey man.
Witch one is better?
Aero 500?
Or
Spectrum?
What size compressor are you using
@@UndergroundPaintKing
26 kobalt
@@realtruth97 I would go with the Aeropro
o ya bring the mirror!!!!
I appreciate that Dave!
They ki11 pimpc ripmain
One of the best to do it Tony!
I don't know about the paints you used, but I was watching the performance of the LVLP gun and it-si-bit-si compressor. It may just be your style, but it looked like you were overlapping the passes with base about 75% and with the clear more like 85%. I always use an old siphon gun and my overlap is only 25 to 50%.
Yes I tend to spray 75% overlap on base and clear but I probably should be 50% on my base and 75% on my clear
killer job
Thanks Robert, I appreciate you checking out the video 🙏🏽💯
#UPK
I love how you are using probably the cheapest 20 gallon compressor HFT sells to paint your cars you know the”Pros” say it cant be done😂
Is the spray it R500 the same gun as the AeroPro R500/A610?
Great guns if you have a small capacity compressor!
You can prime, flake, base coat and clear coat with the same gun.
😂 we been proving the pros wrong for a while now, I’m my opinion they are the same spray gun but as you said they do a great job!
Here is a video I did on that topic
th-cam.com/video/LWCHXFZLwP8/w-d-xo.html
@@UndergroundPaintKing i just custom paint motorcycle parts as a side hustle hobby so the two stage 26 gallon fortress exceeds my requirements for air. I can run my DA sander and polisher I use the A 610 and the Lime line gun Which is also a good gun but is a 1.3 nozzle only
I use it for base coat. It is also LVLP.
The HVLP guns over work my little compressor.
Enjoying your videos BTW.
@@Swampyssidehustlehobbyshop appreciate you checking out the videos Swampy, I would like to see some of your work if you don’t mind sharing!
@@UndergroundPaintKing I don’t know how to post pictures here
Great job..
Thanks Donald, I appreciate you checking out the video 🙏🏽💯
Hello King, Great video and thanks for your time.
question. I want to go old school and paint lacquer paint. Have you done that and do you have video on it? What lacquer paint you recommend?
Thanks for checking out the video Borna Nel, I haven’t done a video on spraying lacquer paint and I honestly don’t have a recommendation for lacquer, I’m not 100% sure but I think you can go with Nason and they may have a lacquer paint that you can go with
Hey King, I forgot to thank you for turning me on to Spectrum cups. I've been paying $5 for 3 generic lids and liners at my local paint store for a couple of years. I just got the Spectrum ten-pack refill for $9.99. I should take you to Red Lobster...
You’re welcome and I do my best to help my people save money 💯💪🏾
Dam boss your the master I’m inspired so I’m Gona order my gun up tonight and use it on my newest project 63 chevyII nova super sport I’m convinced I can pull this off
Thanks Gary, I appreciate that and you definitely can tackle your project yourself 💯💪🏾
I don’t like lvlp. They just don’t atomize well. I can tell I’ve been painting for years. It does a decent job just looks too blotchy I could also hear the moisture from the lines struggling as it was spitting a bit. I don’t think that was the product. More like overheat compressor. My solution. Since 230 is diff to find and the compressors are a ton of cash simple. Buy a cheap used 25 gal and have 2 air lines. Run 2 compressors switch hoses everytime u feel losing pressure. Easier on both compressors and make like simple a quick switch hose while spraying no wait time for catch up. No dry spot and no need for lvlp
A lot of DIYers are looking for a spray gun they can use at home and with a small setup and the SprayIT does a good job and I get plenty success stories of people who have success with them so I’m sorry you don’t care for them but there are others that do!…everyone just has to find what works best for them and I’m glad you found what works best for you…appreciate you checking out the video Tsty5
I was about to try and spray bomb my 2000 Honda Accord sedan because I have a small air compressor but I think I'm going to checkout your channel to find out what gun, material, etc you use. I'm doing some airbrush work too (trying to promote my skills). I'm almost 50 and it's now or never. I'm tired of trying to be perfect; I'm just gonna go for it!
Go for it!!!…I know you have the skills to knock it out the park 💯
So watching you spray the trunk with the Oh My Clear … looks like you double the pass or complete over lap ?
Awesome watching your clips !
I do a 75% overlap when spraying clear, I’m glad the videos help!
She looking good! Had to pause the video so I’m could see without the shaking and HOT DAMN is all I got to say… question: how long would you let this cure before maybe taking it to a race track and subjecting it to rock chips? Asking for a friend 😉
Lol I don’t know what happen with this video James but I appreciate you as always and I would wait a good week or 2 and let the clear dry good
I'm in Australia and about to paint a project car I've been watching your vids and learnt a heap from you thanks. I had a lot of trouble trying to buy the sprayit gun they seem to be sold out everywhere I think I found the same gun under a different name r500 from China does that sound right? Thanks again.
I’m glad the channel has been helpful Chris and I hope it continues to help and yes that is the correct spray gun the R500 which you can get from china and at a good price from what I have been told!
Base coat/clear coat is so forgiving. My ole' man put a spray gun in my hand at 15 (34 yrs ago) loaded with acrylic enamel. He said, "boy if you run this paint job. You better be halfway gone before I see it."😆 And omg if you streaked it?! My pops learned with synthol and acrylic enamel. But anyway, you got a new Sub. I like your vibe. Have a good one
😂😂😂 that’s a great story and I bet you learned how to lay that paint without getting runs!…I appreciate you subscribing to the channel and I hope it’s helpful in anyway possible 💯
Man I would love to try one of the guns but I also know that you can paint out standing paint jobs with anything you are blessed with a great talent
Thanks Danny I appreciate that and appreciate you checking out the video!…give it a go with one of these spray guns I’m sure you’ll do your thing with it 💯
Which one would you chose if you only have the money for one sprayit or harbor freight black widow
@@dannylee9138 for the price of a black widow you could get 2 SprayIT spray guns
Nice Job, Question for your great knowledge, do I need to use a sealer when spaying a urethane base coat? As a DIY person I have always shot single stage Acrylic Enamel then do a cut and buff. Just bought the Spectrum HTE and going to switch it up to a 2 stage on this Flip I'm working on. Again awesome job, keep up the great work and look forward to seeing more.
Thanks William I appreciate you checking out the video…I recommend spraying a sealer but it’s not always necessary to spray sealer so it really depends on the condition of the vehicle that you’re spraying
Video went crazy at the end🤪
😂 yeah I don’t know what happened but there is a part 2
@@UndergroundPaintKing #upk i will check it out
Beautiful work! All done with a Sprayit. Wow! What size air compressor would you recommend as you inspired me to paint my car with the Sprayit?
I think 21-30 gallon compressors are good for the SprayIT Huey, appreciate you checking out the video!
Hey, just got my Spray-it delivered this week and used it today to paint and clear some plastic pieces. Not much of a test for the gun, but seems to work well. Used just my 20 gallon compressor. Probably going to use it for base mostly. No high solids clears. I seen that video🙄. I sprayed some Speedokote medium solids clear. Also bought the Harbor Freight Spectrum pps refill kit as I already had cups and all that. Works just as well as the other Chinese pps cups I have purchased off Amazon and Ebay. It's what I'm used to. I'm 10 minutes from a HF so i'm just going to pick them up instead of ordering like I have been. Can always find something else I think I need while i'm there....
It works great for small jobs…let me know what you think of it after a few jobs
Awesome job sir, didn't look like you were having any trouble at all what the lvlp thanks for another great video
Thanks Sheldon, I appreciate you checking out the video and the spray gun did a great job!
Nice work Champ! You turned that dud into a stud! You ever have a problem putting tape over fresh paint for that two tone? I didn’t know you could tape it up so quick. Could you do the same for single stage paint?
Thanks Matthew I appreciate that and I don’t have any problems when doing two tone paint jobs and as far as single stage I would let the paint dry a lot longer if not completely before doing my second color just to make sure I have no issues
Slick
Thanks L. Boogie I appreciate you checking out the work!
If you could put a picture up of it in the community post. At the end it was so shaky I couldn't see the final results really
I’m going to put up the video of the Camaro outside Brandon…I appreciate you checking out the video!
What size cup did you use for the whole car? 22oz or 28oz? Thanks! Outstanding information. Keep it coming, you’re giving people confidence to go out and try it.
I believe the cups are 22oz…I appreciate you checking out the video Scott!
Thanks my cousin has an old iRoc that’s been buried under clothing for 15 years
You need to convince your cousin to unbury the IROC and give it new life Geoff…I appreciate you checking out the video!
How much paint to paint a car this size?
The mix ratio on the paint that I use is 1:1 meaning 1 part paint and 1 part reducer, so in my case I get a gallon of paint and a gallon of reducer which makes 2 gallons of sprayable materials. Typically a gallon will get a vehicle this size painted inside and out
Thanks King!
@@patdesignsinc you’re welcome!
Great video as always sprat jobe came out realy nice specially spraying black what is the cfm and gallon compresaer was you using for that gun ?
Thanks Husky I appreciate you checking out the work and the compressor is my 21 gallon and the cfm is 4.3 I believe
Brilliant once again Paint king, thank you!! Just curious, how much blank paint did you end up needing for the car? I have a simlar sized job and not sure how much to buy.
Thanks C A I appreciate you and I used a gallon of sprayable material, so the base I use mix ratio is 1:1 so that’s half a gallon of the base and half a gallon of the reducer
There goes that man again Mama...
Looking good man...some silver SS stripes would have looked good too. 🍻
You’re right Johnny them silver stripes would have been nice 💯…I appreciate you checking out the work!
That R500 is doing good for you on the black Camaro! Good job. I use a R500 also.
Thanks Robert I appreciate you and the r500 does a great job!
I don't know who you are or what you do but youtube algorithm recommended this video. Good job and I wish your success in the future!
Thanks Ken Y I appreciate you checking out the video and I wish you nothing but success in everything that you do and I hope the channel is helpful in anyway possible!
King, you are the boss! Very nice technique, like a robot!. You make it look easy, but we all know it's kinda tough to get it slick.
That clear seems thick?💪💪
Thanks Stanley I appreciate you and you’re right this clear is thick, one coat of clear is equivalent to 2 coats of clear and definitely gives great UV protection 💯
I'm painting the same car with the same gun. I just uploaded a video of me starting it up after a few months.
I’ll have to check you out Anthony…I appreciate you checking out the video!
Nice paint job as always, very informative. Couldn't get past the shaking at the end but good content. UPK
Thanks John I appreciate you and I don’t know what happen with the footage because it didn’t upload that way but I’ll be putting up a short video of the finished product
Nice been watching a lot of videos thinking of starting my bodywork on my 81 caprice
Go ahead and do it Fam 💪🏾 it’s nothing like doing the work yourself and seeing what you’re capable of 💯
Thank you for these videos. I've had this gun for a few years and painted a few boats but not a car yet. You've helped me feel confident with going ahead and repainting my truck. I appreciate it brother Keep up the excellent work.
Thanks I appreciate you and I’m glad I could be of help in any way 🙏🏽 I’ll definitely keep the content coming!
You ever try the SILCO brand clears….the european clear i believe is the high solids at 58% solids and mixes at 2:1 as well i use it on everything and its awesome…..its great just off the gun…..no cutting or buffing needed if you know what your doing and best of all you get about 2 gallons of usable product for a hair under $200……refinish depot out of vegas is who i get it from!!!
@@trentdawg2832 I’ve never used it but I’ll look into it, I appreciate the info Trent!
@@UndergroundPaintKing yeah it goes on like butter and basically your done……cutting and buffing is optional or unless you have some correcting to do………i just finished primering the c/10 last night with white primer…damn near tepted to just put clear over it ……have you ever heard of anyone clearing primer? Im not really gonna do it but damn the primer went down PERFECT
@@trentdawg2832 I’ve had someone talk about clearing over primer but I’ve never seen it done
I noticed that you painted it with the mirrors on the car. was it difficult to get good coverage on the part of the door that the mirrors mount?
I can adjust the gun to get coverage back there but it’s best to remove the mirrors
Great job! After watching your vids, I'm ready to buy the sprayit and compressor. I need a lot of practice, but I think it's worth it. Appreciate the videos it's a great learning tool.
That’s good to hear Roderick I’m glad the channel could help in any way possible!
how much horses power did the compressor have. and did u cut and buff?
2.5hp and no cut and buff
thanks
@@Nutflame55 you’re welcome 🤘🏾
Will a 26 gallon 1.8 hp work?
@@Nutflame55 depending on the spray gun you use , if the compressor will supply the spray gun consistently you should be good
It’s most definitely official!!!! Thanks for the teachings my brother.
I appreciate that Nahji and I hope the channel continues to be helpful!
How long did you wait after the second basecoat to due the first clearcoat?
I like to wait 20-30 minutes to let it flash before applying clear
Nice work! What pressure are you running out of the tip?
Thanks I appreciate you…I don’t remember what pressure I sprayed at when I did this vehicle but I put it in the video for the base and the clear
You did that big bro 💯 🔥🔥🔥🔥
Thanks bro I appreciate you checking it out 💯💪🏾
Good evening if u can get a video of car bfore u do anything too lol
I actually showed the car in another video Cleveland but it start showing the cars before I paint them
Came out sexy gotta try that clear and gotta get me a LVLP I’m getting by with my spray guns and my 29 gallon air compressor but sometimes I run out of air and have to wait when I’m going a big hood or two doors at once always learn something new from you’re video keep up the great work brotha
Thanks Ali I appreciate you and a lvlp spray gun might be just what you need to help you out and eliminate the issue of running out of air!
@@UndergroundPaintKing yup It will I’ll have to order me one or possibly buy the kit that comes with two I need a little gun for painting small parts
What kind of paint cups are you using
I’m using the spectrum pps cup system from Harbor Freight
Also what about your fan pattern is it open for
Love all your videos just bought r500
@@williamharris631 it was full fan and full fluid
@@williamharris631 I appreciate you checking out the videos 💯
Great job there King !!! You got the shakes bad there King nice car …
😂 Joan I appreciate you and I really don’t know what happen to the video when I uploaded it
impossible to watch after 29:14
@@TheAdeybob there is a part 2 at the end of the video that shows the end result, something happened with the footage being downloaded on to TH-cam
@@TheAdeybob here is part 2
th-cam.com/video/qK8ZenH9dKc/w-d-xo.htmlsi=Xn-186regb4A8T5Q
Excellent work. Thank you for the teachings.
You’re welcome Bruno, and I appreciate you checking out the video!
So you don’t really take the car apart for painting?
Some cars don’t get taken all apart and some do just depends but you’ll definitely get the best results taking it apart
Nice Job. Which lvlp gun are you using?
Thanks Keith I appreciate you checking out the video and I’m using the SprayIT spray gun