How To Repair A Vacuum Handle - Don't just use tape!

www.vacuumspot....
When your vacuum hose splits don't just tape it up and don't rush out to buy a whole new vacuum hose. Follow the simple steps on this video and you should be able to repair most vacuum handle problems.
The vacuum handle I used in this video is a 32mm size and is part number BEPC
www.vacuumspot....
If you have a 35mm handle fitting then you will need BPP035
www.vacuumspot....
Follow me on twitter @VacuumGuru
VacuumSpot Blog
www.vacuumspot....

[@RyokanDaigu]

Thanks for mentioning that the hose cuff screws in the opposite direction! I was wondering why it wouldn't screw on. Also, one should not press too hard on the clips of the clip ring, because they might break (which happened to one of mine). Finally, if you are not able to pull the broken part of the hose out of the hose cuff (because it is glued), simply start pulling on the spiral-like material of the hose and it will progressively detach itself from the hose cuff as you pull.
A really useful video! Thanks to you, I was able fix my hose in just a few minutes, reusing the original parts and not having to go to the store. All I did was to disassemble, cut off the broken part and put everything back. Wonderful!

[@VacuumspotAu]

Having owned a shop for years I have seen this repair confuse many a vacuum owner. I have a similar video embeded on our site and it gets watched many times

[@peterg91]

Great man, even in 2023. God bless you!

[@shrinivasvaze]

Thanks man! you have saved me 100 euros which i would have spent on a new vacuum cleaner :) thanks a ton!!

[@amira.2260]

Thanks for the great video. It saved me from buying a new Vacuum. I ordered the parts from he vacuumspot online shop and they were delivered in 3 business days. Just one note: the problem mentioned in the video about the click ring: I have the same issue, and I had to fix with a lot of force, but it did not click naturally on a Voltra vacuum cleaner (model 2006).

[@darkthemesociety]

Thanks Bro. You saved me buying a new hoover :)

[@rodturner6757]

1:10 Alec finally gets the tape off :-)

[@WJCTechyman]

Electrified hoses are a bit more complex but the tip still fundamentally applies. Rainbow hoses are a bit tricky as well but same idea, you just have to take the time to remove the pieces of hose from the cuff, add adhesive and then thread it in. Oh, they call it a cuff because it resembles cuffs on various shirts, jackets and sweaters.

[@882ashok]

Thanks a lot Alec for your video. I could repair my vacuum handle in 2 mins :-).

[@slodown3670]

Thanks! You saved me a few £s!!

[@chessdude67]

Duct Tape is the answer to all problems on planet earth! :)
Your fix it looks a bit better, lol! Thumbs up!
Tim 

[@WJCTechyman]

I know this is an old comment but are you familiar with Red Green? He usually fixes random stuff with, "The handyman's secret weapon: Duct tape!"

[@thehonestkitchen4308]

I can fix my mom's vacuum cleaner now. I think I love you. :¬)

[@Sarah-tx9wz]

Hi Alec, helpful video. What if it breaks at the other end, near the vacuum cleaner?

[@Euodia-kg4gr]

Hi how can i make my own clips for my vacuum hoover to attach the top back to the basket. Can you please help

[@AdamsCarWashVids]

i have a electrolux model 337 and the original hose is loose on the machine end of it, and sometimes it comes out and due to the design it does not use a click ring and hose cuff. before i go down to my local godfreys (vacuum shop and service center for those not in Australia) to get it repaired or replaced i thought why not try TH-cam and see of what it has to offer

[@shubus1598]

Thank you Bhai 🥹🤌

[@NigadooNB]

Good video but my Shark Navigator vacuum does not have a hose handle like this one and can't be repaired like this one shown. So my only option was to buy a new handle or tape it which I did. I live in Canada.

[@NYTruthseeker]

Help, my vacuum hose in USA does not have the click release part, appears to be permanent. any thoughts? Thank you!

[@paulinecamillo7045]

I love you Thank you!

[@vacuumboy6.0]

simple Simon really easy

[@desireuys2794]

My hose bends near the machine. How can I fix that? Can I lenghten my hose a bit? That you for the video!

[@susmitasunar9174]

Thank youu

[@GlennDavidBeatty]

Alec, we have an ancient but rarely used Whirlpool FC7000XMO and the hose is hosed and needs replacing. Part number is 744191 and/or WPL-4148437 - either way it is no longer made. Please recommend a person to fix this issue...and/or where I can buy a hose to replace it (any color but black)... will ship it anywhere in the u.s. - please respond asap! Glenn

[@cherylgillam4365]

I have Wertheim 5030 that has split in the same spot as the one in your video. Can I fix it the same way. Mine is the first type of handle for the 5030. Not the gas handle looking one. I do not want to have to pay $169.00 for a new one if I do not have too. Any help would be appreciated. Thanks

[@inuhoshi1]

Where can I get hose caff? Is this fit any kind of hose?

[@lonnieg5900]

How do I know which size the hose is? Diameter or circumference?

[@saranga6869]

Thanks M8t!!

[@lesleyleibel8178]

How to remove a handle on a kenmore elegance hose

[@adippaudel3588]

sorry but i couldnt find the lock on samsung SC4130. could anyone help me??

[@sracbufe9050]

Struggling with it as well as it only has just 2 holes in the two opposite sides, but no bit in them to push in. Did you find any solution to it?

[@beejay2431]

you don't seem to be in the USA. I repaired Vacs for some 20 plus years in the USA and have NEVER seen that type of vac. hose. Therefore that's a simple repair in your country, not mine, but thanks for the video anyway.

[@mariadow4716]

i never tape the hose up on my henry hoover

[@marktodd700]

by Teresa: easy fix but doesnt apply to a rexair rainbow :( no clicky thing

[@JimTom.]

not for some, thats wat the video is for.......