Dave has helped me before fix my friends 47re a broken second gear strut . He took time years ago to explain to me how the triple disc convertor holds more than the single back when folks said there was no difference in holding . I guess that's been put to bed lol . I always been a fan of Dave's products.. if I had a automatic I want there products
@@Junior-hd2hc mine got some but it feels like is shaking when I applied it, I have to give her a little push to back up , im going to open the fluid pan to see whats going on.
Alright I took apart my transmission, nothing was worn except the OD housing. The snap ring that needs to be pressed on was broken and the clutches werent pressed on. Gonna try and drive it this weekend.
So if you needed to replace just the housing, there is no need to disassemble the internal overdrive section? Sounds like something I could actually do myself if that were the case (I don't have a press). Great video.
@@AndrewBrowner Worked good for me.. I shoved a #2 pencil in the parking paw to get it out. Going on 3 years without an issue. Got my housing from Cascade.
@@andrewjessen764 i got the housing off, the park rod stayed with the transmission, ive heard its a pain to get it back behind the pawl, did you just slide the housing on and spin the output slightly to get it to pop behind the pawl?
Where do you measure the width of the piston at when selecting the correct spacer. That information is of no use without knowing where you measure the piston at.
Dave has helped me before fix my friends 47re a broken second gear strut . He took time years ago to explain to me how the triple disc convertor holds more than the single back when folks said there was no difference in holding . I guess that's been put to bed lol . I always been a fan of Dave's products.. if I had a automatic I want there products
That last part I think was pretty important from what I've heard, glad you mentioned it. But would be nice to see where you measured that "width".
the 5 disc pack is recommended when overhaulin a 42RE with the stock 2 or 3 discs
This would have been a good time to show installing the repair shim.
does this part can fix the reverse issue ? thanks
Does urs not have any reverse or did u get it fix?
@@Junior-hd2hc mine got some but it feels like is shaking when I applied it, I have to give her a little push to back up , im going to open the fluid pan to see whats going on.
Alright I took apart my transmission, nothing was worn except the OD housing. The snap ring that needs to be pressed on was broken and the clutches werent pressed on. Gonna try and drive it this weekend.
Also when I open the pan I saw pieces of the snap ring that broke
@@Junior-hd2hc saw nothing was wrong?? Betcha that reverse drum was scared something terrible & or band seriously needed to be replaced?🤔...
So if you needed to replace just the housing, there is no need to disassemble the internal overdrive section? Sounds like something I could actually do myself if that were the case (I don't have a press). Great video.
Same situation I’m in
put me down for the same problem, going to give it a go and just throw the known good parts in a new unbroken housing and hope for the best
@@AndrewBrowner Worked good for me.. I shoved a #2 pencil in the parking paw to get it out. Going on 3 years without an issue. Got my housing from Cascade.
@@andrewjessen764 i got the housing off, the park rod stayed with the transmission, ive heard its a pain to get it back behind the pawl, did you just slide the housing on and spin the output slightly to get it to pop behind the pawl?
@@AndrewBrowner Yes I believe so
witch trans is this one its just like minebut i dont no yr or witch one it is it has been replaced ty
Very helpful thanks!
Fiber steel
how do you check the clearence?
Where do you measure the width of the piston at when selecting the correct spacer. That information is of no use without knowing where you measure the piston at.
how to align the axis inside
Thank you.
Tengo sin serevsa