A simple way to clean fuel injectors My TikTok account vm.tiktok.com/... my account on Facebook www.facebook.c... My Facebook page / mechanic200 My group link on Facebook www.facebook.c... To support the channel
Ive been reconditioning injectors for 30plus years and there is no possible way that engine ran fine after they were attacked like that video shows. No lapping of faces Wet n dry to polish parts When "tested" it "atomised"at an incredibly low opening pressure and was dribbling/leaking fuel out. Again....no way that engine ran fine on those injectors after being buthcherd like that. Holy shit is all I can say
If such aggressive way is to clean the fuel injectors, then how are we to control man made climate and darken polluted air a cleaner environment, I think these mechanics and engineers are not at all aware of the clean air and atmosphere.
Oh get of your high horse, the guy is working with what he has got. He even says on one of the other comments his circumstances Only enable him to work like this.
Any suggestion on reading materials that teach the best rebuilding process? I've searched Amazon Books and didn't come across anything. I'm trying to rebuild mine, and TH-cam seems to lack a lot of info on diesel injector rebuilds. Thanks!
This is why TH-cam needs to put the dislike button back. Ill bet some people will think this is ok, but injectors are no joke and have very tight tolerances.
you are aware the calibration of this injector is now completely up the left not only by stripping it down but by all that aggressive banging on machined surfaces and sanding the main spool needle just because diesel squirts out doesn’t mean it performs as it should
Apparently Indian back-street auto mechanics have an immense topological resistance to chemical toxins but limited supply of gloves and microfiber cloths ?
what the technician does is a simple cleaning of the injector, he is not repairing it. I don't even check the control valve. An interesting video for those who are entering diesel electronic injection. but a long way from a professional job of remanufacturing an injector
ч-чистота. главное в работе с топливной. фильтры по 2 микрона там...все такое. я в ахуе от работы на картонке и отсутствию ультразвука, но в целом интересно конечно
It may well be that the engine with these injectors ran again afterwards ... but certainly not, as the manufacturer aimed for! Why for heaven's sake rub around with sandpaper on parts that are made on Micron, I don't understand. Gloves? You can do it, but you don't have to ... are only petroleum derivatives! Hey, with all the love I have for craft activities, but the number here is something from the horror cabinet ... please add the heading with "You shouldn't do it that way!"
You're out of your mind if you think using sandpaper on the insides of an injector is good idea. Even 2,000 Grit is too aggressive for anything in an injector.
This must be a troll video. Everything seems wrong here. From washing hands with gasoline to the way he hammers the injectors and polishing internal parts. I wouldn't put those on my car for sure.
Using the highest standards of cleanliness and precision measuring, disassembly and reassembly tools an excellent job is done of not reconditioning these common rail injectors!
Obviously no one Commenting about toxic chemicals and etc doesnt know what its like to live in one of those broke ass places to understand how high in the important list cleaning his hands with diesel is to this man or how important exact tolerances are for that matter. I bet them injectors work better after "cleaning" them lol
Circumstances forced us to work this way and not take precautions in handling materials and diesel without wearing gloves Lack of capacity and lack of services And the conflicts in my country
I am not pro or against this procedure. Obviously the environment is not that clean and the tools are not that high tech but what I can say for sure is that what you are seeing here as a leakage comes from return port of the injector. So the drops of fuel come from return port of injector not from nozzle... My opinion ...
Finally, there is someone with a positive view of work If people knew the conditions we live in, the lack of possibilities and the high cost of living Yes, I work in a simple and primitive way because of the difficult conditions in my country My country is full of conflicts, problems and lack of services Even the Internet is intermittent, and the interruption may reach more than a full month My country, Yemen, is going through its most difficult conditions without electricity, services and a shortage of medicines I'm working to be able to Thank you for this nice comment and your words are correct. Diesel drops coming out of the return hatch
I took an injector off to clean it and now the car is not starting, all the injectors are not spraying, there is pressure in the rail but the injectors are not opening. Help me please
Engineers need years to develop a good working injector and then there is this dude who cleans it with WD40 and sandpaper. I bet the car didnt run at all after that "rebuild"
Why electromagnet isnt torqued properly? And from video in the end, it leaks very badly, you can melt piston with that dripping
How to F up an injector 101
Ive been reconditioning injectors for 30plus years and there is no possible way that engine ran fine after they were attacked like that video shows.
No lapping of faces
Wet n dry to polish parts
When "tested" it "atomised"at an incredibly low opening pressure and was dribbling/leaking fuel out. Again....no way that engine ran fine on those injectors after being buthcherd like that.
Holy shit is all I can say
Are these piezoelectric injectors?
@@Trenscendent judging by the location of the leak off, I'd say they were.
If such aggressive way is to clean the fuel injectors, then how are we to control man made climate and darken polluted air a cleaner environment, I think these mechanics and engineers are not at all aware of the clean air and atmosphere.
Oh get of your high horse, the guy is working with what he has got. He even says on one of the other comments his circumstances Only enable him to work like this.
Any suggestion on reading materials that teach the best rebuilding process? I've searched Amazon Books and didn't come across anything. I'm trying to rebuild mine, and TH-cam seems to lack a lot of info on diesel injector rebuilds. Thanks!
Por tacaño te quedó gotiando trabaje para nada,por qué no le pusiste una puntera nueva y el vástago todo el conjunto nuevo
This is why TH-cam needs to put the dislike button back. Ill bet some people will think this is ok, but injectors are no joke and have very tight tolerances.
I'd be interested to see those injectors put back on what ever car they came off of and see how well it runs after. clouds of smoke I'm guessing
when he gets the abrasive paper on it though to give it a "clean"
Shocked in how poor this video is compared to mine th-cam.com/video/IHswRP1sDL4/w-d-xo.html
..
hahahahaah this how u dont do it, specially whit the all the sensors in new cars, this maybe works on Golf 2
@@diesel-technology5507 not sure about using sand paper period bit I'd say that's a very high grit
you are aware the calibration of this injector is now completely up the left not only by stripping it down but by all that aggressive banging on machined surfaces and sanding the main spool needle just because diesel squirts out doesn’t mean it performs as it should
Absolutely 💯
Which brand ultrasonşc cleaner is good
İ try vevor but i am not happy with it ;)
Apparently Indian back-street auto mechanics have an immense topological resistance to chemical toxins but limited supply of gloves and microfiber cloths ?
Correct
They are like rats
Said a random pale guy
If you are taking an injector apart like that you need to use an ultrasonic cleaner along with a carbon cleaning formula. Wd40 is not built for this
precision engineering vs caveman with WD40 and dirty cardboard...
- still leaking
what the technician does is a simple cleaning of the injector, he is not repairing it. I don't even check the control valve. An interesting video for those who are entering diesel electronic injection. but a long way from a professional job of remanufacturing an injector
this is why we need the dislike counter back!
اخي العزيز
Ketika di coba akan bocor karena di amplas😅
👍
You just know when there is a logo saying Hussein Car in the video that legit information is provided
very important to know this
HOU IS MI JOB
Pure damage.
ممكن تبعثلي رقمك عل الواتساب
ohne handschuhe :D::::D:;:_
100%leaking injector after dismantling, it has to be change with new nozzle once you dismantle
ok🤣
ч-чистота. главное в работе с топливной. фильтры по 2 микрона там...все такое. я в ахуе от работы на картонке и отсутствию ультразвука, но в целом интересно конечно
But the injector was leaking on the test bench.
Alot of fuel consumption problems😤😤😣
Congratulations for the 608k views after all criticism.That's most important,right?Don't matter what you post.
It may well be that the engine with these injectors ran again afterwards ... but certainly not, as the manufacturer aimed for! Why for heaven's sake rub around with sandpaper on parts that are made on Micron, I don't understand. Gloves? You can do it, but you don't have to ... are only petroleum derivatives! Hey, with all the love I have for craft activities, but the number here is something from the horror cabinet ... please add the heading with "You shouldn't do it that way!"
😂😂😂😂😂😂😂 تيتوضء
لايصلح هاذا الحاقن ابدا هاذا هراء ولا يمت للمهنة بصلة العيار والتنظيف والعمل الصحيح لايكن هاكذا مطلقا انت مجرد هاوي لا اكثر ولست من اهل الاختصاص
Como 'Speedy Gonzales'- 🤣... Good Job, Man!
He's teaching how to buy a new injector assembly ahaha
You're out of your mind if you think using sandpaper on the insides of an injector is good idea. Even 2,000 Grit is too aggressive for anything in an injector.
Show how you test the injector you play you uncompleted movie
Malinis na malinis gumawa si idol
should be called how not to clean a injecter if you want your car to run after
Hahahahahaha
Any boby know what kind of a cleaner he use for, there is a foam, carb & injector clener and wd40 not like that...txs
Muslim expert at work…soon in your neighborhood too
This must be a troll video.
Everything seems wrong here.
From washing hands with gasoline to the way he hammers the injectors and polishing internal parts. I wouldn't put those on my car for sure.
is it true that adding atf to your diesel fuel will clean your injectors?
There is so much wrong with this video I don't know where to begin
I think something is not right on this particular video
Good to read the comments. Summary: this isn't the way to clean diesel injectors
Bàn cân kim đẹp quá
The purpose of this video is so you know how it should not be done.
hahaha
injector 😂 gaya aj
🤣
Nunca lijen la punta de los inyectores
I wonder if that guy washer his face with the liquid or uses the liquid as a mouth wash
Cleaning The Diesel fuel injector, thanks for sharing successfull always 👍🙏
Holy cow, look at that dribble 😄
The injectors were ruined.
Poi ci lamentiamo x il tumore ect metti guanti Babuino
He's ruined that injector
It exists an nozzle injector called '''annular spraying''' who gives a beter resul than the holed nozzle........ and it accept a low presure.....
Using the highest standards of cleanliness and precision measuring, disassembly and reassembly tools an excellent job is done of not reconditioning these common rail injectors!
sandpaper and cleaner do all the job
and you can check complety ruind injector in the end of video
th-cam.com/video/IHswRP1sDL4/w-d-xo.html
My refurb is better 👍 th-cam.com/video/IHswRP1sDL4/w-d-xo.html
Obviously no one
Commenting about toxic chemicals and etc doesnt know what its like to live in one of those broke ass places to understand how high in the important list cleaning his hands with diesel is to this man or how important exact tolerances are for that matter. I bet them injectors work better after "cleaning" them lol
Circumstances forced us to work this way and not take precautions in handling materials and diesel without wearing gloves
Lack of capacity and lack of services
And the conflicts in my country
viimastel sekunditel näha, et ots lekib, kui kole :D
some poor soul has probably paid this chap to absolutely ruin their injectors
روش بستنتون مثل بندس،تنها سنباده زدنتون اشتباس
I was doing that when i was 15 years old, i am now 69, i don't think that the new generations mech,s don't know how to do it.
Nu functioneaza bine nu trebuia sa dai cu hartie abraziva, ai micsorat diametrul exterior al axului...
لا يوجد فتحات عندي في رأس ال Injection ما السبب
حاقن الوقود يحتاج الى تغير
الكربون يعمل على اغلاق الفتحات
I am not pro or against this procedure.
Obviously the environment is not that clean and the tools are not that high tech but what I can say for sure is that what you are seeing here as a leakage comes from return port of the injector.
So the drops of fuel come from return port of injector not from nozzle...
My opinion ...
Finally, there is someone with a positive view of work
If people knew the conditions we live in, the lack of possibilities and the high cost of living
Yes, I work in a simple and primitive way because of the difficult conditions in my country
My country is full of conflicts, problems and lack of services
Even the Internet is intermittent, and the interruption may reach more than a full month
My country, Yemen, is going through its most difficult conditions without electricity, services and a shortage of medicines
I'm working to be able to
Thank you for this nice comment and your words are correct. Diesel drops coming out of the return hatch
Sir naya injecatr kitana me melega ertiga vdi ka
Cleaning The Diesel fuel injector, thanks for sharing successfull always
Its dripping 💧
See that? Haha those are busted nozzle tip.
This is how we Nig-Rig, keep up the good work 👍🏾
Has a huge lack bro…😂😩
Safety with gloves ✨👍🏼
Eu lavo sem maquinas e sai em perfeitas condiçoes
👍
Is this a piezoelectric injector?
good
What type off sand paper does he use
Itu ngrusak bos
Its leaking by.
Good job. What kind of liquid do you use to clean them up? Is it gas, diesel or alcohol?
Good woork 👍👍👍💕💕💕💕💕🌙🌙🌙
Thanks
Hi.gud morning San Po puede mag pagawa San malapit Ang shop Po no inyo
💯👍🏻👍🏻👐👐👐👍🏻
Injector repair ma Kitna kharch lagega par injector
I like your style
Thanks
Good work, fore next time of cleaning of injektors, can Tunap 989 been used...im recomandet this product..😊
🤣
Terrible!!
You are Great sir
Why did you not put the ball bearing back in the injector then at 07:00 mins it just disappeared 😀
If you follow them you're dead my friend
was a bubble.
His brother is a brain surgeon
Hhhhhhhh
Use gloves 🧤
Totally unhealthy way to work. Not only for hands, but spreading oil and chemicals on the air will harm his lungs.
exactly said,
I took an injector off to clean it and now the car is not starting, all the injectors are not spraying, there is pressure in the rail but the injectors are not opening. Help me please
I'm lost
Never seen injector come apart that easy....
متى يتم عمل صيانه البخاخات الديزل
رقم الهاتف
Sir Ian having toyota etios diesel car 2013 model.in my car 4th injector blocked.where I can clean.i am in virudhunagar.tamilnadu
What spray u used for cleaning
Couldnt find it
Shit work
For real?
Engineers need years to develop a good working injector and then there is this dude who cleans it with WD40 and sandpaper. I bet the car didnt run at all after that "rebuild"
I have a video and it works fine
🤣🤣🤣 it hurts to watch. it is not right!!!
Podes mostrar Cómo marcha en el vehículo lo que reparaste?
el coche anda bien
@@h77 😂🤣
I put w40 mixed with diesel in the fuel tank. to clean the injector?
Intresting, is it work.? usually I mixed with JASO FC oil like castrol 2T.
Galing talaga ni kabayan gumawa
Your video always great
Just wingin it lol took my tonka apart last week