Yamaha XMAX 300 Battery | 4K

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ส.ค. 2024
  • What's up everyone!
    In this week's video, I wanted to show you guys how to remove the front fairing of the XMAX 300 so you can work on the battery. You might want to do this if your battery has gone flat, you want to add heated grips to your bike or install any other electrical accessories to your XMAX 300.
    You only need 1 x 4mm Allen Key!
    I hope this video helps someone out! Please comment below if you have any questions or if I didn't explain something properly!
    Ride safe!
    -
    My Gear:
    GoPro Hero 8 Black - amzn.to/3e8qsCb
    Polar Pro ND Filters - amzn.to/2ZmofPl
    Rode Smartlav+ Lavalier Microphone for Smartphone - amzn.to/2ynTqi8

ความคิดเห็น • 91

  • @kevinwilkinson1510
    @kevinwilkinson1510 3 ปีที่แล้ว +3

    Short and to the point, thank you. My U.S. Xmax 300 has 2 screws and two push pins holding the battery cover on.

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว

      Those push pins must make it slightly easier to take off

    • @kevinwilkinson1510
      @kevinwilkinson1510 3 ปีที่แล้ว +2

      @@tapecknows Actually, I don't think you need to remove the two pins or in your case the two screws, at the top of the fairing as there does not seem to be any part of the cover that is held by those two fasteners.

    • @deltajohnny
      @deltajohnny 2 ปีที่แล้ว +1

      @@kevinwilkinson1510 i have just done it, and I can confirm that these 2 extra pins / screws do not need to be removed 👍👍
      Thank you very much for the information 👏👏

  • @deltajohnny
    @deltajohnny 2 ปีที่แล้ว +2

    Very useful video 👏👏, and I just want to point out that the two lower pins or screws located at the top of the fairing do not need to be removed, as there does not seem to be any part of the cover held by them.
    Thanks for the video! 👍👍

    • @tapecknows
      @tapecknows  2 ปีที่แล้ว +1

      Thanks for the comment! It seems to be needed for my specific model. It might be different for different regions

    • @deltajohnny
      @deltajohnny 2 ปีที่แล้ว

      @@tapecknows Thank you very much again, and to offer some more information to others seeking for help, my Xmax 300 is a Spanish 2018 model 😉😉
      Thanks again, and keep up the good work! 😉😉👍👍

    • @colinmurphy4403
      @colinmurphy4403 2 ปีที่แล้ว +1

      Delta, you are right there was no need to remove the two screws located near the speed monitor, because the front panel just clips in there.

    • @deltajohnny
      @deltajohnny 2 ปีที่แล้ว +1

      @@colinmurphy4403 Thank you very much for the information 😉😉

  • @InfusedBiker
    @InfusedBiker 3 ปีที่แล้ว

    Thank you so much. My 2020 Xmax batter died due to the cold weather and not riding for two weeks and I needed quick video to help me out! Just connected the charger and hopefully it will work when I need to leave for work early in the morning at 4.30AM !!

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว +2

      I’m glad I can help! Once you know which bolts to undo, it’s relatively quick to get to the battery. The battery should be ready to go in 3-4 hours since it’s a small battery 🔋

  • @ozzymick1431
    @ozzymick1431 2 ปีที่แล้ว

    Thanks for a very clear demo. I need to drip feed my battery when I store my Xmax when I head overseas. Cheers.

  • @abdullatiffadam589
    @abdullatiffadam589 ปีที่แล้ว

    Excellent brother 👍

  • @jiriberanek791
    @jiriberanek791 ปีที่แล้ว

    Helpfull, thank you!

    • @tapecknows
      @tapecknows  ปีที่แล้ว

      I’m glad it helped!

  • @carlosfdias
    @carlosfdias 2 ปีที่แล้ว

    Thanks very much man this video saved my day!

  • @brianrichard1768
    @brianrichard1768 3 ปีที่แล้ว

    Good Vids , well explained. Used to have a 06 silverwing. Picking up 1 of these tomorrow. Scooters are functional Fun.

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว

      How are you getting on with your XMAX?

    • @brianrichard1768
      @brianrichard1768 3 ปีที่แล้ว

      @@tapecknows Didn't get. Bike had damage from shipping and unfortunately it is the only one within 300 miles of me so now I wait.

  • @Swizzenator
    @Swizzenator 3 ปีที่แล้ว

    short n sweet thanks

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว

      Thanks for watching!

  • @majorbrighton
    @majorbrighton 3 ปีที่แล้ว

    BRILLIANT 👍☺️ Thank you Sir. So much easier to do now, you explained it so well that I bet you sell bikes?! Thx

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว +1

      Thanks for the compliment Stephen! Man I wish I sold bikes like these haha

  • @OlivierLeclercq78
    @OlivierLeclercq78 ปีที่แล้ว

    Very good explanations , Thx a lot

  • @janson534
    @janson534 4 ปีที่แล้ว +2

    Great video! Are you considering any modifications to parts of your XMAX? Like carbon fibre parts and such...

    • @tapecknows
      @tapecknows  4 ปีที่แล้ว +1

      Thank you Janson! Yeah I’m thinking of changing the exhaust and even the handlebars. I’ll have to wait for work to start again though 😔

  • @thomasfowler487
    @thomasfowler487 3 ปีที่แล้ว

    Great job! Video and voice over A1

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว

      Thanks, appreciate that! 🙏🏽

  • @nesnasimcenzuru385
    @nesnasimcenzuru385 2 ปีที่แล้ว

    Thank you. You helped me a lot! 👍👍

    • @tapecknows
      @tapecknows  2 ปีที่แล้ว

      Glad I could help!

  • @lanbolanon3128
    @lanbolanon3128 3 ปีที่แล้ว

    Cheers for this.. helped me.

  • @Fiatmannen1
    @Fiatmannen1 3 ปีที่แล้ว

    Very good video! How would you say windbuffeting is on the scooter say up to 50mph? And how tall are you, and is it roomy enough?

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว +1

      Nothing really that noticeable, I have my windscreen on the highest setting and I never feel like my head to getting taken off.
      I'm 5'8" and I could do with a bit more leg room. I've adjusted my handlebars so I have a more upright riding position but leg space could do with a slight increase in the forward position. Then again, I don't want my legs out front like a Harley haha

  • @richiep3520
    @richiep3520 3 ปีที่แล้ว

    Thanks for that easy simple instruction. Is the side blue panels easy to remove? I am trying to replace a badly scratched blue panel.

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว

      I haven’t tried yet but I think they’re simple enough. I’ll make a video if I need to take the panels off at some point

    • @richiep3520
      @richiep3520 3 ปีที่แล้ว

      @@tapecknows I am one of those people who breaks everything I touch and wing it. But as these panels are expensive, I won't be messing about. I have seen a few videos on TH-cam but nothing clearly showing as well as you did. The part I need on the parts site just shows the top part, not the black piece that runs down to foot rest so it has to be able separate. Panels can be so fiddly.

  • @simpsonma
    @simpsonma 3 ปีที่แล้ว

    Very helpful! Thanks^^

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว

      Glad I could help!

  • @cayicen
    @cayicen 2 ปีที่แล้ว

    çok işime yaradı, teşekkür ederim

    • @tapecknows
      @tapecknows  2 ปีที่แล้ว +1

      Amazing, glad I could help!
      Translate: harika, yardım edebildiğime sevindim!

  • @oscarbchacon
    @oscarbchacon 4 ปีที่แล้ว

    Great tutorial. That's for the video. 🙂

    • @tapecknows
      @tapecknows  4 ปีที่แล้ว

      Thank you Oscar! I appreciate your support 🙏🏽

  • @rinaldofarias1577
    @rinaldofarias1577 2 ปีที่แล้ว

    Obrigado! Thank you

  • @bfarm44
    @bfarm44 2 ปีที่แล้ว

    Trade in your Allen key wrenches for magnetic ones trust me

    • @tapecknows
      @tapecknows  2 ปีที่แล้ว

      That’s a good shout, will have a look 👌🏽

  • @stephenmurphy2177
    @stephenmurphy2177 28 วันที่ผ่านมา

    How do you open seat with dead battery?

    • @tapecknows
      @tapecknows  28 วันที่ผ่านมา

      You should have a key for your XMAX, the lock is on the exhaust side under the seat, just above the engine

  • @JoseVargas814
    @JoseVargas814 3 ปีที่แล้ว

    Have you looked at installing a gps tracker on the Xmax?

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว +1

      Yeahh I have a Monimoto tracker on mine

  • @spuddyboypineda9943
    @spuddyboypineda9943 3 ปีที่แล้ว

    How do you connect a battery tender so that you can charge the battery without removing the cover? Thanks.

  • @ExploringKY
    @ExploringKY 4 ปีที่แล้ว

    Where did Your turn signals go? Did you upgrade front and back? Thanks

    • @tapecknows
      @tapecknows  4 ปีที่แล้ว +1

      No those are the stock indicator signals here in the UK and I believe in Europe too. I know the models in the US have those indicators that stick out like a standard motorcycle

  • @mariostekic
    @mariostekic 4 ปีที่แล้ว

    Thanks for video 👍👌

    • @tapecknows
      @tapecknows  4 ปีที่แล้ว +1

      Thank you for watching Mario! Hope it was helpful 🙏🏽

    • @mariostekic
      @mariostekic 4 ปีที่แล้ว

      @@tapecknows
      Of course 👍👌I am a new Xmax owner and there is a lot I want to learn to do myself 😊💪

  • @earvinchelymunoz5884
    @earvinchelymunoz5884 9 หลายเดือนก่อน

    Where is the lighter fuse located

    • @tapecknows
      @tapecknows  2 หลายเดือนก่อน

      Not sure

  • @jazzkkma
    @jazzkkma 3 ปีที่แล้ว

    how to change the fuel tank cover of xmax 300, I got a fibre one

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว

      Sounds like a good one, I’ll look into it!

  • @adamwells8183
    @adamwells8183 2 ปีที่แล้ว

    Can you please let me know how to change kph display to mph?

    • @tapecknows
      @tapecknows  2 ปีที่แล้ว

      It’s an analogue speedometer so you simply read the smaller numbers for mph

    • @adamwells8183
      @adamwells8183 2 ปีที่แล้ว

      @@tapecknows the digital odometer?

    • @tapecknows
      @tapecknows  2 ปีที่แล้ว

      Oh if you mean the odometer then I’m not sure how to change that from km to miles, might be specific to country the bike was sold in

    • @adamwells8183
      @adamwells8183 2 ปีที่แล้ว

      Ok thank you I will look in to it

  • @seelishanaidoo6885
    @seelishanaidoo6885 3 ปีที่แล้ว

    Where did

    • @tapecknows
      @tapecknows  2 หลายเดือนก่อน

      Where's what?

  • @MaksMr
    @MaksMr 2 ปีที่แล้ว

    battery 6v or 12v ?

  • @00411aman
    @00411aman 3 ปีที่แล้ว

    為什麼要多拆下面兩顆螺絲?

    • @tapecknows
      @tapecknows  2 หลายเดือนก่อน

      It just loosens everything to make it easier

  • @experious007
    @experious007 4 ปีที่แล้ว

    Hello again..! Nice stuff. Damn seems like you got alot of stuff connected to your battery. If you can check out my two reviews (also one of my xmax) would be much appreciated :)

    • @tapecknows
      @tapecknows  4 ปีที่แล้ว +1

      Thank you Blue Skies! I actually only have heated grips connected to my battery... the wiring is just a bit messy haha

  • @eizolimelight
    @eizolimelight 3 ปีที่แล้ว

    ありがとう!!

  • @HyusKays
    @HyusKays 3 ปีที่แล้ว

    Looks very very tedious...

    • @tapecknows
      @tapecknows  3 ปีที่แล้ว

      Maybe at first, but it’s a simple job

  • @theo4903
    @theo4903 3 ปีที่แล้ว +2

    very disappointing, after the shooting session sound u did not continue where u left u just put back the case.
    I wanted to hear u tell us more about how to take out the battery etc.
    pointless video...

  • @archer8096
    @archer8096 4 ปีที่แล้ว

    Very helpful! Thanks

    • @tapecknows
      @tapecknows  4 ปีที่แล้ว

      Glad I could help 🙏🏽