I just bought one cuz of good review and best bang for buck this have a heatsink as large as it seize at the back putting his weight at 700+ grammes...
As soon as you connected the solar panels they registered and showed they were charging the battery, mine is not showing the arrow to show it's charging the battery and can't work out why???????
I’m replacing an cs-evolution charger with an epever but my current charger has an output for the vehicle battery and the epever does not. Where do I put them wires. Thanks in advance.
Hi! Great video. I was wondering if you could help, as the manual is not very clear! Apologies for the basic question, but my charge controller is flashing an empty battery and flashing the warning symbol which means 'battery over discharged'. I'm unsure how this happened, but the manual just says 'when the battery voltage is restored to or above LVR the load will recover'. But how will this happen? Do we need to just leave it charging or reset it somehow? Any help would be greatly appreciated 🙂
Looking at the screen it seems that the "not charging" icon is showing, rather than the sun icon. I am having this issue and in fact it is not charging the battery. What's with that icon (like a black sun with a line through it)?
Hi joe I’ve a 120w panel on motorhome I I’ve a duel controller at moment it’s charging my leasure battery I want to charge my vehicle battery from the second port any ideas what cable I need and what size inline fuse many thanks
Hi Peter. If its a 12v system then you could use 20amp cable as your only kicking out around 5 amps from each output terminal. Thicker cable is always preferred though as it will aid the resistance side of ohms law. Feel free to send me pics if I can be of service.
Hi Joe - helpful video - sorry for the basic question but do you know how to turn load ON and OFF ? The manual is unclear - and having recharged batteries after a low battery error load indicator ( bulb ) is off and I can't figure out how to change. Thanks in advance.
Hi I’m having problems getting my solar system working, I have a flashing warning triangle with a ! In the middle, also the night mode indicator is showing and nothing I do seems to do anything, could you please please help me solve this issue, it could just be me I don’t know, thanks in advance Kind regards Ken
Hi I’ve just connected mine up turned the fridge on to check its displaying a load but still showing zero . A bit confused. Any advice would be appreciated.
mine does too but then I have a 300w panel so I have assumed that there is no load from the battery and only the solar is doing the work. I could be wrong though
Hi, yup, I am new to all of this, I have a bank of 6 12 volt batteries wired to produce 24volts output, each battery has 6 cells, so will the controller figure this out? Or do I input 36 cells... Ps battery is lead acid
No reason why it wouldn't but I would check the vehicle charging voltage and floor voltage. Some solar chargers can be adjusted to match the spec of certain batteries, so in principle.....yes. Many camoer vans use these with a split charge controller which works fine.
Hey man. I have a epever mppt controller without a screen. I have just bought a 110ah agm battery to replace the old 50ah lead acid one. How do I set up the new battery without a screen? Cheers
This one looks like the Tracer, but the Tracer name is not on it?! Also, what is the difference between the temperature sensor, that is sold separately, or this little plug in sensor?
thanks for the advice on charging leisure batteries 5amps
Positive should be put in first negative last. Charge comes from negative if positive is already hooked up the charge has some where to go!
looks great and big on that wall ;)
I just bought one cuz of good review and best bang for buck this have a heatsink as large as it seize at the back putting his weight at 700+ grammes...
What battery type do you put for a leisure battery? SEL?
Great explanation mate. Is there away to change the input amperage to the battery? My Tracer2210 seems to be very low at 1.0 amp max on a sunny day.
As soon as you connected the solar panels they registered and showed they were charging the battery, mine is not showing the arrow to show it's charging the battery and can't work out why???????
Similar issue on mine
@@Dazsnail I ended up wiring mine in series and changed to Victron
My battery is under voltage but EP-01 app show charging status: Equalising and it’s from many days . It’s must be in boost state
All these mounted solar controllers, nobody bothers to paint the board 😂
Hi, can’t seem to find part1,
I’m replacing an cs-evolution charger with an epever but my current charger has an output for the vehicle battery and the epever does not. Where do I put them wires. Thanks in advance.
Hi, what about the load output voltage ? for a "12V" battery, is the load output remains 12V constant ? associated max discharge amp is 10A ? Thanks
Hi! Great video. I was wondering if you could help, as the manual is not very clear! Apologies for the basic question, but my charge controller is flashing an empty battery and flashing the warning symbol which means 'battery over discharged'. I'm unsure how this happened, but the manual just says 'when the battery voltage is restored to or above LVR the load will recover'. But how will this happen? Do we need to just leave it charging or reset it somehow? Any help would be greatly appreciated 🙂
Looking at the screen it seems that the "not charging" icon is showing, rather than the sun icon. I am having this issue and in fact it is not charging the battery. What's with that icon (like a black sun with a line through it)?
Hi joe I’ve a 120w panel on motorhome I I’ve a duel controller at moment it’s charging my leasure battery I want to charge my vehicle battery from the second port any ideas what cable I need and what size inline fuse many thanks
Hi Peter. If its a 12v system then you could use 20amp cable as your only kicking out around 5 amps from each output terminal. Thicker cable is always preferred though as it will aid the resistance side of ohms law. Feel free to send me pics if I can be of service.
@@joeamos-somasystemspvbatte6 thanks joe what in-line fuse should I use
What is the 117 and the 2 stand for in the load screen?
Can this charge controller be changed from Celsius to Fahrenheit? If so, how?
Thanks
Hi Joe - helpful video - sorry for the basic question but do you know how to turn load ON and OFF ? The manual is unclear - and having recharged batteries after a low battery error load indicator ( bulb ) is off and I can't figure out how to change. Thanks in advance.
Hi,hope not to late ,just press blue button from right and will see on screen a bulb icon ,how you look to controller
Can you adjust the charge control and float level?
Hi,..do you know if this tracer is capable to charge LifePo4 batterys without changing the settings?
You will need to change settings as they are default to lead acid. Your lithium ones will need a higher voltage.
@@joeamos-somasystemspvbatte6 Thanks!
Hi I’m having problems getting my solar system working, I have a flashing warning triangle with a ! In the middle, also the night mode indicator is showing and nothing I do seems to do anything, could you please please help me solve this issue, it could just be me I don’t know, thanks in advance
Kind regards
Ken
Hi I am connecting my fuse box to this controller but it won’t light anything, my led lights don’t work my phone charger doesn’t work what do I do?
I need more info my friend. Fuse box on the boat? LED lights on you phone charger? This is to charge 12v batteries. please give me some more info
Hi I’ve just connected mine up turned the fridge on to check its displaying a load but still showing zero . A bit confused. Any advice would be appreciated.
mine does too but then I have a 300w panel so I have assumed that there is no load from the battery and only the solar is doing the work. I could be wrong though
@@joeamos-somasystemspvbatte6 thank you for replying, all the best 👍
Hi, yup, I am new to all of this, I have a bank of 6 12 volt batteries wired to produce 24volts output, each battery has 6 cells, so will the controller figure this out? Or do I input 36 cells... Ps battery is lead acid
Will this work with car engine as well
No reason why it wouldn't but I would check the vehicle charging voltage and floor voltage. Some solar chargers can be adjusted to match the spec of certain batteries, so in principle.....yes.
Many camoer vans use these with a split charge controller which works fine.
Hey man. I have a epever mppt controller without a screen. I have just bought a 110ah agm battery to replace the old 50ah lead acid one. How do I set up the new battery without a screen? Cheers
You have to buy a mt 50
Ciao perché non riesco a modificare il livello minimo di scarica di una batteria lifepo4?
This one looks like the Tracer, but the Tracer name is not on it?! Also, what is the difference between the temperature sensor, that is sold separately, or this little plug in sensor?
bla, bla, bla
Just another pathetic attention seeker. Off you pop little one