2000 Camry P0440 EVAP Vapor Canister
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Gather Necessary Tools:
Rechargeable tool
Set of Pips hooks (from Walmart, $7)
14mm socket wrench
Separator tool (available on Amazon)
Blaster spray
Prepare the Vehicle:
Spray the parts with Blaster spray and let it soak for about 20 minutes.
Remove the EVAP Canister:
Locate the two screws and remove them. Keep the screws safe.
Notice the play in the canister and move it to access the plugs.
Disconnect the main plug by pinching and separating it.
Mark the connections with a marker for easier reassembly.
Use a wrench to help disconnect any remaining connections if needed.
For the harder-to-reach connections, use the Pips hooks to lift and pull out the tubes.
Access and Remove Bolts:
Identify the 14mm bolt and remove it.
Locate and remove the second 14mm bolt on the back end.
Slide and Remove Canister:
Slide the canister towards the driver back wheel to remove it.
Ensure you have disconnected all tubes and plugs.
Use the separator tool to assist with removing the canister.
Reassembly:
Once the canister is out, follow the reverse process to install the new canister.
Reconnect all tubes and plugs, ensuring each connection is secure.
Reinstall the bolts and screws, ensuring everything is tightly secured.
Final Checks:
Double-check all connections and ensure there are no loose parts.
Test the canister installation by running the vehicle and checking for any issues.
By following these steps, you should be able to replace the EVAP vapor canister in a 2000 Camry LE Japan model efficiently.
The video provides a step-by-step guide on how to replace the EVAP vapor canister in a 2000 Camry LE Japan model, emphasizing the tools and procedures needed.
Key tools required include a 14mm socket wrench, a set of Pips hooks, a separator tool, and a Blaster spray for loosening parts.
The process involves disconnecting several components such as plugs and tubes, marking connections for reassembly, and using specific tools to remove and replace parts.
The guide highlights the importance of marking connections and being gentle when handling parts to avoid damage.
The presenter reassures viewers that the task, while detailed, is manageable with the right tools and careful attention to instructions.
these are the tools i used , you can find them on amazon
Dorman 911-633 Vapor Canister Compatible with Select Lexus / Toyota Models
amzn.to/3zuFWQF
Orion Motor Tech Fuel Line Pliers Set, 5 pc Fuel Line Disconnect Pliers Set with Fuel Filter Caliper Hose Pipe Clamp Clip 80 Degree Disconnect Pliers, Heavy-Duty Fuel Pipe Repair Set for Auto Line
amzn.to/3xOLvJm
8PCS Pick and Hook Set, Precision Automotive Hook Set, Car Auto Oil Seal/O-Ring Seal Gasket Mini Precision Hooks Puller Remover
amzn.to/4eTi9Kw
SATA 3/8-Inch Drive Quick-Release 72-Tooth Ratchet with an Teardrop Head, Full-Polished Chrome Finish - ST12971U
amzn.to/3WdvRk8
1/4 Inch Drive 12-Point Metric Socket Set, 8-Piece Deep Well Socket Set, CR-V Steel Tool Set, Sizes(6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
amzn.to/3xCXp9j
Yoshi does it all. Music, construction, art and cars. 🚗
coming out with a cooking channel soon
@@Christionfilms can’t wait
💯
📝