Fusion 360 Tutorial - 5 Things Beginners Want to Know about Fusion 360
ฝัง
- เผยแพร่เมื่อ 3 ส.ค. 2016
- Want to get into all those great tutorials on TH-cam? Here are the 5 fundamental things that a beginner want to know about Fusion 360.
1:25 minute- Fusion Overview
3:45 minute- A360 (Quick Cloud Overview)
7:55 minute- Preferences (The Settings You should know)
10:48 minute- Modeling Rules (Important!)
24:10 minute- Save & Versions (You Need to Know This!)
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
contact@larschristensen.org
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschristensen.org/free-...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschristensen.org/ - วิทยาศาสตร์และเทคโนโลยี
I really appreciate your tutorials Lars, I find my learning curve becoming much easier after watching.
Even though these tutorials are somewhat dated, they're the #1 source that I go to, when I want to learn something fundamentally important about F360. It blows my mind when people just decide to sit down and teach, for the main purpose of educating people. Hat off to Lars.
You are the best teacher on this subject! Thank you for sharing your extensive knowledge. You are taking a very complex topic and making it so easy to understand.
Thank You Lars for all the time and effort you put into all of your Fusion 360 tutorials. I had tried to learn CAD a few times and always felt like I was putting in a ton of effort and not getting anywhere but in a couple hours I have some basic ideas and things I can already make are flooding through my brain. I can't wait to get into more in depth tools as I move forward.
Hello Lars, I'm just starting out in fusion 360. Your videos are awesome! You do a great job of breaking down the software. This makes learning much easier. Thank you.
Hi Lars, I’ve been using F360 as a beginner for a while and continue to pick up great tips from your content. Keep up the quality work. Thank you. 👍🏻😎🇦🇺
Amazing tutorial Lars. Clear and well explained. You have now given me the confidence from a starting point to want to now watch your video again and again until it sinks in , then take on further information and tutorials so the picture so to speak to use Fusion 360 grows without being disjointed. Thank you so much Lars you have given me a light bulb understanding now to go forward. Brilliant........I'm so excited to learn more without being overwhelmed as before. Amazing, what a teacher........
Tusind tak for this series, it gave me the right motivation to keep on learning this software
Love your vids Lars, keep them coming please 👍
Thank you! Promise I will :-)
I too love your videos...I’m brand new to it and I drew up your conduit box right with you I love it !
Thank you for great tutorials! I just watched your "Absolute beginner" videos and was able to do simple parts myself already.
Awesome! Great job :-)
Love the tutorials! Now to go from finished product to printing it with a 3d printer.
Brilliant teaching style. Your videos are very well paced, well organized, and really step-wise. Many videos think they are being procedural, but glance over things that beginners can't follow. Thank you for your very practical approach. Your 3-part series on the electric junction de-mystified things in F360 that I'd been stuck on for weeks! Great work!
Hi Daniel, thank you for taking the time to watch the videos and comment. Really glad that you find the content helpful :-)
Have an awesome day!
Best,
Lars
I thank u for taking the time to think about and take care in planning the things that true beginners need to know! This is the only one I've come across that someone just beginning can not only follow, but get and remember the info needed!Thanks again!
Thank you for watching! Happy you found it helpful!
Have a great day!
Very helpful. I need to get a better understanding of the orbit and navigation tools. Thanks for doing these videos.
New to Fusion. Excellent stuff. Thanks Lars.
Great Tutorial! Seeing it for the second time to review the fundamentals! Tks Lars!
Very Good Sir. I am working through all your videos.
Great lesson to learn, Lars! keep doing what you are doing.
Thank you so much! This video was so helpful!
As always, great help and video Thank you!!!
Very informative, when will you upload more videos,we love watching it. You teach better than my professor!
thanks Lars!! I'm new on fusion 360, this video help me to organize the way I have to learn. Thanks!!!
You are so welcome
Great video, very informative. I didn't know about sculpting, now I can't wait to go give it a try. Thanks!
Thank you for watching!
Great lessons Lars, I started out by watching how other people draw in Fusion 360 and start modeling a few complicated boxes. Feel Autodesk Fusion 360 is a very powerful program and easy to use. I'm now investing more time to learn all the basic things you're talking about in your video clips. With the experiences from modeling on my own, it is much easier to understand each important point mentioned in your video. A lot learned, thank you.
You are so very welcome :-) Thank you for watching!
Great information Lars! This provides a great foundation for a beginner to Fusion 360. Your explanations are excellent and easy to understand. Definitely subscribing to your channel.
That is awesome to hear DCD Laser & CNC .Thank you for watching the videos
I am one of those beginner Fusion 360 users and your videos are a definite must.
Your series of Fusion 360 videos are outstanding! Please keep up the excellent work!
That is awesome to hear hudacekf .Thank you for watching the videos
Thanks Lars , great videos and great energy
I love your videos, they are very informative and entertaining!
Got it, thanks Lars, the other tutorials might make sense now!!!
You really filled in some essential gaps. Great video!
Very informative and helpful, excellent tutorial. Need all the tuition I can get. Thank you Lars.
Thank you Lars, I’m just starting out with Fusion 360 and I really found your video very helpful.
I am happy to hear you are finding them helpful. I'll keep them coming :-)
this was exactly what I needed. I started using fusion360 recently and I had only used solid works and sketch up before (about 10 years ago too when software wasn't tied to the cloud). The whole A360/cloud thing has been stressing me out. but I didn't realize it had such an elegant built-in versioning functionality. it was also cool to learn about the sculpt method since that seemed fun but daunting at first. thanks so much! this is a great video for someone who used to use older cad software and is starting to use fusion!
Daniel, Thank you for watching and take the time to comment! Really glad you found the content helpful :-)
Have an awesome day!
Thanks this helps to be able to go back and watch it again.
Thank you so much! Subscribed!!!
Thanks Lars. finding your tips really helpful. keep them coming.
Thank you Chris!
Have an awesome weekend!
REALLY LIKE ALL YOUR VIDEOS .....they are so informative for beginners
Hey Lars, Thanks I am just starting out. You help explain things well . I'll look to you as I am learning. Thanks , Dave
Thanks for taking the time to watch the videos David.
Have an awesome day!
Wow Lars!! I unsuccessfully tried to learn Fusion 360 quite some time ago and I'm going to give it another shot. For the past year or so I've been using and trialing some different CAD software both direct and parametric modeling and now that I'm returning back to the fold Fusion 360 does not seem so intimidating. From a hobbyist and CAD amateur this is really a great product. My bad for throwing in the towel. If I hadn't who knows where I would have been today.
Thank you for these wondering videos Lars which are a tremendous help and I hope to never abandon the fold again!!
Peter
You are so very welcome 👍😊Thank you for watching
Thank you! It was very helpful!
Great video Lars. I'm new to 3D modeling but have some experience with old-school 2D wireframe CAD. Lots of good info here I have not seen in the other tutorials. Thanks for doing these videos.
Thank you for taking the time to watch the video! Glad you found it helpful.
Have a great day!
Lars this video is vital for newbs like myself. This video explains the general philosophy without getting stuck on tangents which newbs don't care about. I watched this many times over, taking notes in a bulleted list. I'll share that list with you when it's a bit more polished up. So you can see what's in my minds eye, as a newb who wants to take articulate notes for other newbs.
That is awesome to hear Royce Barber .Thank you for watching the videos
Inside Fusion you can do all kinds of crazy things. Tru that!
Thanks Lars, I learn so much from your tutorial vids!
Thank you for taking the time to comment and watch the videos!
Have an awesome day!
Thanks Lars! Very helpful for getting me started.
That is awesome to hear Ron Young .Thank you for watching the videos
Thank you very much! It is very useful for me because I am a beginner in Fusion 360
Thanks Lars, for starters of great help!
Great training, slow enough to keep up and learn a few great foundational skills. Thanks
Thank you, Doug. Glad you find the videos helpful!
HAve a great day!
Best,
Lars
Hi Lars,
I'm new to F360 (and computer-based CAD). I just wanted to say that this has cleared up so many issues that I had come across in the past couple of months. I had found the general tutorials I had seen so far assumed that you knew the basics of F360, then sped off into the distance leaving me stranded...
You've cleared up the constraints problems I was having, model importing, and versioning, all in one video.
Thank you!
(I realised that the versions were buried somewhere, but had to produce stuff at work, then learn how to draw properly in my own time)
Susi xx
Thank you for taking the time to watch the video and comment! Happy you found it helpful!
Have an awesome day!!
Best,
Lars
Hi Susi, Thank you for taking the time to watch the videos and commenting. Really happy you find the content helpful :-)
Have an awesome day!
Best,
Lars
Thanks much also Lars. Good basic tips!
"Lars is more" :-)
Thank you Phil! Have an awesome week!
Really great, removed lots of frustration in 30 minutes, Thanks!
That is awesome to hear Joseph Rossi .Thank you for watching the videos
+Lars - Also wanted to add a big thumbs up for this video. I'm still rather newly on my 3D printing adventure, and of course, got thrown into CAD.
(Screaming & kicking, I might add ...) Last time I dabbled in CAD was 1996 or so ... it's changed a bit ... (!!!) This tutorial is excellent, you have a new subscriber. I also want to point out that you're a natural teacher.
Some people have the gene for explaining complex things in simple language. Sadly, most engineer types don't, which doesn't stop them from producing videos, LOL!
AutoDesk's "Intro" video to Fusion is an example. The instructor uses a technical term 30 seconds into the very 1st introduction to CAD that took me almost an HOUR of research to understand. Not a great start for a n00b!
I showed it to my Wife, and she was like "WHAAAT??!? Is he MAD using a term like that 30 seconds in"?? Too funny (but not at the time).
As part of my job (Computer Consultant) I have to train people on computers, and I see you know the rule "repeat the basic point at least three times to ensure they get it"!
Well done, and thanks again!
Awesome! Thank you for taking the time to write!
Have a great weekend!
Great video I am a beginner with CAD and need all the help I can get.
Dave
Hi Dave, Thank you for taking the time to comment. Hang in there, you will get it guaranteed.
Have an awesome day!
Excellent Video Lars! Thank you.
Thank you so much Peter!
Thanks Lars, really good approach. Moving from years of experience in Sketchup to Fusion 360 myself and i have the same experience with a lot of the tutorials. A LOT of info in a small timeslot, because they don't wan't the videos to be too long.
Thank you Michael!
Have a great day!
Another good job Lars. Keep it up.
Very helpful as I am new to fusion 360
Very informative. Thanks. I am just learning this program and found a lot of the information you provided to be very useful. I am mostly still familiar with ACAD but not so much wioth the parametric modeling. I think I like this much better.
Thank you for taking the time to comment, Larry. Glad you found it helpful!
Have a great day!
Thank you, Lars! Tips was very helpful! I didn't know about stored previous version's, this realy great!
I just learned more in 40 min of your videos than I did from a $80 manual and 8 hours of frustration, Thanks for making me believe in Fusion 360 again!
That is awesome to hear SteelHorses .Thank you for watching the videos
this is great video style. also level of excitement is now perfect:-) Thanks for sharing.
Thank you! Really appreciate the feedback!
Have an awesome weekend!
Thank You very much. I need 3D modelling for my new business idea. Thanks to You I now can do it myself and not spend on expensive files from outside.
keep 'm coming mate great stuff
Really good video this. Found it very helpful. Thank you.
Thank you, Darren!
Have a great day!
Hi Lars,
Thanks so much for doing this video. I am considering purchasing Fusion 360. I have little experience with modelling/cad programs and I found your introduction to be very helpful.
Hi Ray, Thank you for taking the time to watch the video. You can download a 30 day trial if you just want to take it for a spin. The trial has all the function of the purchased license.
Enjoy!
Best,
Lars
Looking forward to watching your tutorials. I started with AutoCad 1.4 in the 80s and grew with it into the 90s. I can't count the number of times I've wished I had it on my computer. I can finally afford an Autodesk product since they made Fusion free... Lol But, when I got it of it, 3d modelling was only on SparcStations and not on PC's. So, this is still very new to me.
Hi Cliff Chism Thank you for watching!
Autocad 1.4 was also the first version I touched :-)
Great video, You answered a lot of my questions. I always feel like I could design a space shuttle after your video's.
Thank you John!
Just coming to Fusion360. No CAD experience, but I've used 3D Modeling software for quite some time. Trying to get the hang of CAD is a little confusing but your video helped me out with understanding the flow of things. Adding this to my favorites for sure.
Thank you Eric, Glad you found it helpful!
I am a complete novice , this video was recommended . Really glad I watched it.
That is awesome to hear Ian Scott .Thank you for watching the videos
That Spiral at thee beginning would make an awesome tutorial ;)
Thanks Lars. I use solidworks and this is day 1 of me trying to get into Fusion 360. This intro video was really useful I have now subscribed and will check out further tutorials. Thanks again this is Rob from Liverpool England.
Thank you Rob. Really happy you found it helpful.
Have an awesome day!
Best,
Lars
Hey Lars love the information! Great videos can you do anything with creating manufacturing files so I can run them at home on my machine
Great information. Thanks
Great video! Very clear and usefully. Thanks!
Thank you so much for taking the time to comment. So glad you found it helpful!
Have an awesome day!
Thank you for taking the time to watch!
Have an awesome day!
Thanks ... Cleared up sketch vs sculpt !!!
You are so very welcome :-) Thank you for watching!
Nice info, helpful info to start 360
Thank you for taking the time to watch Per!
Have a great day!
Very good introduction to many things which I found unclear in Paul McWhorter's videos, particularly getting the 2D sketch to turn completely black. Thank you.
Ok Lars. You won my sub;P much appreciated your time and effort!
Thank you for taking the time to watch and comment!!
Have a great day!
If Lars ever snapped and became a kidnapper, he wouldn't do anything terrible. He would just tie someone to a chair, turn on some music, and talk about fusion 360 for days.
Love the videos man!
That is awesome Kin . Maybe I have a future as an interrogator :-) Thank you for watching the videos
Holy #@%! a Fusion 360 video that I can actually follow and learn from! Subscribed!
Glad you liked the video :-). Thank you for subscribing!!
without these videos I would have no idea where to start. thanks a LOT!!!
You are so very welcome :-) Thank you for watching!
Love your vids Lars..excelente..!!!!!
Great video buddy I've learnt a lot just from you I will carry on watching thank you
That is awesome to hear OVERLOAD-RC .Thank you for watching the videos
Hi buddy just a quick question I'm new to fusion 360 and trying to make a cylinder with a cut out for a o ring washer to fit inside I'm basically making a nylon water jacket for an RC motor
Thank you for all of your help!
Hi scott gammon Thank you for watching!
Great video. Learned a lot.
That is awesome to hear TJ Lucero .Thank you for watching the videos
Great video keep them coming man
This was very helpful! Thanks Lars! -mj
Great! Thank you for watching Mark!
Have an awesome day!
great suggestions, I'm a SolidWorks user and do like Fusion 360. thanks for your videos .
Hi John, Thank you for taking the time to comment!
Have an awesome day!
great tutorials...keep them coming.. I am coming from SW and the challenge is not easy.. but easier thanks to you. I find move and copy in F360 to be the most difficult for a beginner. Can you do a beginner tutorial on this topic..please.
thnk u for the vidz..awesome!
Thanks Lars! I´ve been looking for a 3d design software, thats easy and intuitive, for some time. Now I´ve found it in Fusion 360! ...And the learning curve is pretty tough, I´d might add! ...But thanks to your slow Danish approach, I think I might be getting there. Thanks a lot. Greetings from Denmark! :)
That is awesome to hear Martin Havshøj Sørensen .Thank you for watching the videos
Thx for the tutorial man!
Super teacher. Thanks!
Lars is a gifted teacher
Hi Lars, I'm finding your tutorial videos very useful. I'm experienced with SolidWorks myself but it's quite straight forward to transfer those skills. 360 seems to have a lot of functions that are easier to use than the SolidWorks equivalent, I may fully switch over.
Hi Adam, Thank you for taking the time to watch the videos. I'm an old SolidWorks user myself. Totally agree with you, plus Fusion have some really good Mesh and CAM tools :-)
Have a great day!
I'm finding that I am having more fun using fusion than SolidWorks. I have noticed that when you save a fusion 360 part to STEP and open in SolidWorks, there are a lot of geometry errors.
This is the only thing that worries me about entirely switching to Fusion 360. I may have future clients that require a fully editable model on SolidWorks, and if my fusion 360 model can't be accurately translated over, then it could become a problem.
Do you have any advice or experience that you could share in this area?
Many thanks,
Great video, thanks.
You are so very welcome :-) Thank you for watching!
Your videos are great! Autodesk should be paying you!
Hi Rob V Thank you for watching!
They are :-) they are very generous
Great tutorial very informative. A lot to learn.
That is awesome to hear Kevin Aldcroft .Thank you for watching the videos
Great Tutorial, thank you!
Thank you Jobs in the Future
Great informative video Lars!
Thank you!