How To Replace Valve Cover Gasket 99-04 Jeep Grand Cherokee 4.0
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- This auto repair video will show you how to replace the valve cover gasket on a 1999-2004 Jeep Grand Cherokee with the 4.0 engine. This is an easy to do repair that can be performed with simple hand tools in your driveway.
Buy Gasket: amzn.to/2JUY1KE
Shop GearWrench Socket Sets: amzn.to/2RsuFYl
Sop GearWrench Wrench Sets: amzn.to/3ecsVvW
#jeep
#grandcherokee
#valvecover
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission based when products are purchased from them.
Buy Gasket: amzn.to/2JUY1KE
Shop GearWrench Socket Sets: amzn.to/2RsuFYl
Sop GearWrench Wrench Sets: amzn.to/3ecsVvW
you help me so so much on doing this job thank you and bless your skill i wish you was in newyork south bronx for your service.........
I have a 2004 grand with the I6 engine. Amazon’s says this part does not fit. What part number will fit?
This video is the truth saves me 950. I just did mine and he is right the nut in the back is a pain I had to stand on a chair to get to it lol
Thank you for watching our video on how to change the valve cover gasket on a 1999-2004 Jeep Grand Cherokee with a 4.0 engine. This is a fairly easy job to tackle that can be performed in your driveway with basic hand tools. Have a great day!
Thanks to you making this video I have been successful at changing the valve cover gasket on my own jeep grand Cherokee.this video made it a lot easier.
Glad this helped you out.
At 32:12 regarding the ground; That should be a ribbon cable grounding to the head. That ribbon ground will help with RF interference with the radio. Very much appreciate the video, guys. Did a great job on the run-throug.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
Thanks for the video!!! Definitely not a mechanic but, this let me change the gasket myself along with the pcv, CCV, grommets, and hoses. Hardest part was finding the perfect angle to get the valve cover out lol
Glad it helped
A true Jeep head paints the cover a bright color😊
lol..Yes bright colors are popular.
@HomeOwnerRepair I was only disappointed that you and him mention or show how to replace the pcv valve grommets on the valve covet
You guys make some down to earth videos. Subscribed *thumbsups*
Thanks for watching
Great video! Gives me hope to actually want to try to do this own my own! 💯
If you follow the video you should be fine. It's not that bad of a job. Hope the video helps you out.
@@HomeOwnerRepair : me too HORepair. Planning to take this job in 4 July 2020. Thanks for the info.🇺🇸🙏👍.
And yes: MAGA.
Nice and clean job✓.
Thanks a lot for your video.
Thanks for watching!
Saw some where the bolt at very front should be last, is that so? A lot of questions I have asked about 3. Doing all my self, hope to hear asap. Girl power!
getting ready to do this repair. excellent video!
Thanks for checking out our auto repair video that shows you how to replace the valve cover gasket on a Jeep Grand Cherokee. How did you make out?
Thanks for all the tips. Even the grinding wheel to clean up the Grommet washers.
Glad to help!
I would advise putting a towel in the mass airpro sensor when it's open.
Hope the video helped you out.
Good video. Very good instructions and video shots.
Thanks for watching!
Thanks for the video. It helped me change mine.
Glad it helped
You guys are absolutely amazing can y’all do a transmission oil change and filter on this same truck thank you bud
We'll keep this request in mind in the event that we need to make this repair in the future.
I was just thinking about doing mine and now I'm going to.. Nice job Very informative.. what's the actual charge to have something like this done for you
It would probably be around 300 bucks
im in virginia, they want 1800 to do it.
@@likealayup 1800 for a valve cover gasket 🤣🤣🤣🤣🤣 or a head job?
Awesome video!
Thanks for watching!
Great video
Thanks for watching
Thank you
You're welcome
To change the valve cover gasket do you need to drain the oil?
No you do not need to drain the oil if you are just replacing the valve cover gasket. Hope this helps you out.
A little too detailed well done however always put the most difficult/in this case rear bolt in first far less likely to Cross thread lots of wiggle room that way
Thanks for watching
thats a good tip, thanks
Ah yes, the hood seal strip, where 10mm sockets go to die
Bwaaahhh..YUP!
What did you clean the valves with??
The valves were fine. If you take the valve cover off and you fine a lot of burnt oil and crud sitting on everything you could use a shop vac to carefully remove it. Hope this helps you out.
What would something like this run to do?
Probably couple hundred bucks including parts.
Good stuff yall👌. What method did you guys use to clean the cylinder head side and the valve cover itself?
We used some brake cleaner on the underside of the valve cover to clean it off.
Like the video, I am putting parts on an engine I bought to place in a 2003 jeep wrangler sport. Could you tell me where I could find those metal inserts that go inside the grommet.
At 16:43 of the video we remove them from the old valve cover grommets clean them and place the inserts into the new provided grommets. If you need them the dealer may be able to get them for you. Hope this helps you out.
Might as well replace the garments on the cover well your at it.
Thanks for checking out our auto repair video that shows you how to replace the valve cover gasket on a Jeep Grand Cherokee. How did you make out?
@HomeOwnerRepair good still have it off I just want to replace the grommets because they are oily.
I have a 2004 Jeep Grand Cherokee and in the wiring harness along the firewall behind the engine I have found 6 exposed wires that were melted together what in the world would cause this ?
Couple of the wires may have heated up on have come into contact with a hot engine component
You don't need RTV anywhere?
The gasket is fine, the gasket is what will seal the oil from leaking. Thank you for watching our video on how to replace your 1999-2004 Jeep Grand Cherokee valve cover gasket on a 4.0 engine.
Thank you. I'm so use to putting RTV where the cylinder head meets the block. 😊
I need help! Currently working on mine (Jeep GC 2000 V8 4.7) and I’m afraid to tighten the bolts even more. Haynes manual calls for about 105 in-lbs (Which is less than 10 ft-lbs). I think that’s about hand tight which I already did now, but 2 things concern me right now.
1. The bolts don’t look as flush down as the other valve cover (Haven’t touched it yet)
2. I can still see a bit of blue from the gasket. Shouldn’t the valve cover squeeze it down
I didn’t use a torque wrench because of limited space. I feel like it needs more tightening but I’m scared of breaking a bolt 😩
Thanks for watching
So there is no specific torque rating or pattern/order to follow when tightening down the valve cover?
I have a 2002 grand Cherokee 4.0L. I was chasing a bunch of vacuum leaks from brittle hoses and when using throttle body cleaner to detect changes in rev I noticed big revs when spraying along the backside seam of the valve cover. Occasionally I'll hear a high pitched whistling that comes and goes. Not to mention the block is pretty wet and dirty. Also having a misfire code for cylinder 6, assuming it's from improper fuel/air ratio due to sucking air through the leaky VC, or even oil dripping into the spark plug well. Any help/advice is appreciated as I plan on replacing the gaskets and possibly the whole cover assembly asap. I also notice the ports for the PCV hose are cracked and loose which cannot be good I'd imagine, hence why I figured it'd be best to just get a whole new kit, and buy the PCV hose assembly separately.
If you follow the video you should be fine
Btw what if no air rachet, for crud ...how can it be cleaned?
You do not need an air ratchet you can use a regular ratchet. I've used a shop vaccum before if there is a lot of burnt oil on the rockers. Hope this helps you out.
Hey coolant is low then full again... On grand cherokee 4.0 what's up? Changed engine oil, nothing milky to insinuate blown head gasket (what I have been reading).. no milky under radiator cap, nor in radiator... Any ideas ?
Is the radiator fluid level up and is the over flow bottle topped off?
what are the torque specs ??
Online resources are saying that it is 85 INCH lbs. Start from the middle of the valve cover and work your way in a criss cross pattern towards the ends. Use a blue Felpro gasket. Hope this helps you out.
Wish the 4.7 was this easy
The 4.7s not the greatest motor in these. The 5.9 on the other hand waaaaahhh...lol
Why didn't you use sealant on the valve cover ?
We used a new gasket. The gasket is what seals the valve cover to the head.
@@HomeOwnerRepair ok thx I just bought the new gasket and was told by the parts store to use sealent too but I gave him a look because of the rubber stops on the cover andvyou cannot tighten hard to let the sealent mesh
Wut all tools do u need??
We tell you throughout the video.
Raise Hell, Praise Dale
Thanks for watching! Don't forget to subscribe!
u should tell people the size sockets
He did, 7/16 I believe it was
He did , 10mm on the bracket and 7/16 on the valve cover
He did
Thanks for watching
Bad design, engine cramped
The most distressing thing is the electrical plug that does not drain easily and I break it as a result
Also, the raw materials of the pipes are poor and dry out as a result of the heat and crack.
I don't understand why they deliberately did that with the jeep, even though it's a great car
Also, there is an important matter which is that the company does not follow up on its agents in our Middle East region
Insignificant agents sell spare parts at very, very high prices, and do not provide complete parts
It seems that the company is not interested in the success of its cars in our countries, the lack of follow-up has failed many cars and made them unwanted and even hated.
Success is achieved by Tweita to the extent that any other car just mentioning it is a nightmare, as simplicity, durability, durability, availability of spare parts and fuel economy are all the share of Japanese cars, especially Toyota.
As for me, I love the pocket, and she does not love me.
Greetings and thanks
Thanks for watching