Chrysler 200 Proxy Alignment on a Budget
ฝัง
- เผยแพร่เมื่อ 6 ม.ค. 2025
- quick video showing you guys how to do a prozy alignment on a chrysler 200
the process is similar on the fiat 500x and jeep renegade anything with the 2.4 tigershark engine
link to scanner
amzn.to/44XGXMb
version 2 (newest)
amzn.to/3rZ6mq4
This saved my car! I have a 2015 Chrysler 200 that hasn't moved since March 2023 due to a bad battery dying in a ice storm and when I put the new battery in my car it was stuck in neutral and wouldn't move, I researched it and found out this was due to the TCM proxy being out of config. all the garages/dealers around here suck and will rip you off left and right so I try to fix what i can on my cars at home. I haven't had the time to deal with it so I've just been driving my Jeep but then I stumbled across your video, bought the Thinkdiag for $89, spent 30 minutes using it and now my Chrysler is up and running again! I can't thank you enough for the video! the dealer had quoted me $400 to do it so you def saved me some money! thank you again!
glad i could help theres not a lot of info on how to do this online and everyone says u cant do it lol but its very easy and this scanner is extremely good it can reprogram some keys ect well glad it worked out thanks
I have the same issue. What did you do for this one?
watch the vid it goes step by step if u need help hit me up@@HELLHOUND200SRT6PROJECT
@@toolsonabudget7763 so this doesn’t work for the 3.6 motor?? I just bought a 2015 200c that needs a trans but I have to do the proxy alignment does this scanner works for it too?
Can you ask you guys does this work for 2015 Chrysler 200 c with the 3.6 engine
Thank you for all info in this video. I wasn't able to drive my car since September and nobody will touch it. Just fixed my car 20min ago with the scanner and it is back on the road
You are very welcome thank you for watching! If u ever need help dont hesitate to ask
Thank you so much for this video I was able to get my car running again. It felt like I tried everything until I seen this video bought the tool on Amazon from out of your link actually plugged in took me two times to get all the configurations corrected. The transmission code kept giving me problems but I unplugged plugged it back in. Did the test again and it cleared it I was able to get it out of neutral and actually pull the car in the garage so again thank you so much for your help.
Glad this was of service!
Which scanner did you purchase? the first or second link?
Worked for a 2015 200S 3.6. Thanks alot man.
This worked great, thank you so much for the tip. Now I just have to figure out what keeps draining my battery. I kept jumping it, which I think is what lead to the proxy alignment issue. Battery and alternator both testing as good, there's something draining it that I cannot track down. But thanks again!
hmm is there anything aftermarket installed?
Hey is it any software you have to download before you do anything it's not letting me it's saying i that the ECU is active but not built and it won't align at this time?? What could I be doing wrong please help I only bought this device because of you brother
Email me with some pics its on my about me and ill guide you through it did your battery die?
@@toolsonabudget7763 yes bro it died two days ago I replaced it and it's been doing this I'm so frustrated but I'll sends pics rn what's your Gmail
Yes my battery died and I replaced it and it started doing this..what's your email??
Thanks for this video everything worked as stated.
Very welcome
Hello, I have a Chrysler 200 2015 limited 2.4l.
The mileage flashes and the transmission slams into first and reverse. My mechanic erased the codes he threw, but he doesn't stop hitting and flashing the dashboard.
Ya it lets u relearn the transmission
@@toolsonabudget7763
What would be the solution
Can I use this if if my car was FLASHING NEUTRAL when I try to shift to park from drive ? Sometimes I crank it up and it’s already flashing neutral and I have to mess with the gearshift till it finally goes into park . I have a 2015 Chrysler 200 2.4L please help ..
Yes
That usually means u need to proxy aling your transmission
So what option would I select BCM or TCM ?
Because you went to 2 different options
Which one ?
Great video Bro ? If I got a check engine light and just changed my throttle body and replaced water pump and thermostat would I need a proximity alignment??
Na maybe just a idle relearn
@@toolsonabudget7763 can I use this to perform procedure ?
I have chrysler 200 back trying to proxy alignment radio saying not configures/mismatch can't figure òut next step. Please help
@toolsonabudget7763 hi. Will the think diag mini work for this also? Or should I get the think diag on your link . For a 2014 jeep Cherokee
My head unit(screen) is keeps prompting to update and when I do and restart the car, it prompts me to do it again. And odometer flashes, can’t charge my phone via usb and the lights on the button on head unit are all out. The buttons do work tho, just no lights. Thanks in Advance !
My odometer keeps flashing and radio isn’t functioning as it isn’t the cars original. One I do it step by step it tells me I have to look for other PROXY. Any chance you can help? $
I got same problem in crysler 2015 200 but is v 6 3.6 not the 2.4
I don’t not if this video work for my car
Should work
Bought this device and it didn’t not work for my Chrysler 200 2015. It kept having connection issues and wouldn’t even let me do the diagnostic test. To the dealership the car goes
Might need to check ur obd port
Im doing the same process to fix my cluster it keeps saying bcm not built ?
unplug the battery for at least 30 minutes then try again or if the voltage is too low charge the battery
Will this make my front speakers work after installing 8.4uconnect radio from 5.0uconnect Also stop my mileage odometer from blinking?
yes u have the readio code correct?
I bought the newer device that you recommended and doesn’t have the proxi alignment option for my fiat 500x
It just doesn’t have the option under special functions
Any ideas??
For the fiat its under the transmission control module
It wasn’t, it was under BCM, just needed to use an android device not an apple
@toolsonabudget7763 I have a 2015 Chrysler 200, it is stuck in neutral, battery was dead. I installed a new battery, and the car started up but it's still stuck in neutral. So to do this reset, does the car engine have to be running?
No should be off
U got the scanner?
@@toolsonabudget7763 yes got the scanner from the Amazon link. I was able to reset the proxi alignment. It was very easy, car started right up
Which one you order in probably going to order the one you blue tooth??@@aboutboxingbiz1684
Do I buy the mini or the big one??
Does it matter it's for my Chrysler 200
I have 2014 jeep cherokee limited with 3.2 v6 will it work on that as well but I had a bad parking brake Module so will it work on that ??
yes it should if u need help u can email me and i can help u out
Hey bro i have a 2013 dodge dart with the 2.0 and my rpm when im driving wont go pass 4000 rpm even the pedal all the way down then i notice my mileage was blinking but then it stop and start again so could this be the problem
Let me check real quick if the 2.0 also has the proxy
So yes it is a big possibility it needs a proxy alignment
I'm get the tool you recommended and try and see if this can fix my acceleration problems cause it's not giving any codes under the check engine like but oil pressure sensor so I think your video kinda help me
My 2015 Chrysler 200, we replaced the alternator, would that require a proxi alignment? The battery light flahes, power steering says its lost communication and the odometer flashes.
Yes the odometer flashing is your computer needing a recalibration, proxi alignment is the usual fix
I bought the thinkdiag mini and didn't work, I can't do the proxy alignment
Whats it doing
Any luck? I just realized I ask the same question above but for a 2014 Cherokee . seems like it can access BCM.
The mini does not have the capability of doing it because it doesn’t have the special features you must buy the regular one
I have an 8 inch stereo from the factory, I bought an OEM camera but it is not active, do you know if it is the next configuration?
it most likely will be sorry for the late reply
Would that fix radio issue with flashing odometer no sound coming out of the radio? Tia
Do u have the radio code
Will this work on a 2013 Dodge Dart 1.4 multi air turbo ?
will this fix the problem with the heat and air that stopped working when my stereo went black? i replaced my stereo but i dont think they aligned it grr
It might do u have any scanner at the moment
Will this help fix back up camera that was changed out along with radio?
Is the odometer flashing
Yes, I ordered and ran the program. It’s telling me the radio is not configured or a mismatch. Ended up not communicating with radio so it didn’t work
Hi about to buy the scanner is their anything else I'm gonna need to buy plz help
U just need a phone or tablet to use it
But the scanner is all u need if u need help u can ask me here and ill try my best
@@toolsonabudget7763 thank you I'm a single mom trying to do this so yea I would appreciate it you could help me thank you
for sure its very simple to do once u set it up
@@toolsonabudget7763 hi I just got it Im downloading right now
where do I get the machine and what was it called again?
Link in description
Wassup, can I update my mileage with this tool ?
Now why would you do that
what was the app you stated to download that requires the year subscription
It comes with free subscription for a year if u purchased the one i linked
I have this exact same car and the gear is stuck in neutral. Will this help. I saw this done with more expensive scanners
does the n flash?
@@toolsonabudget7763 no it doesn’t
(Proxy Alignment) Is this one going to work for Jeep Cherokee KL 2018 3.2Liter?
whats it doing?
I just upgrade to new Instrument Cluster and the mileage staring flashing. @@toolsonabudget7763
any suggestions? @@toolsonabudget7763
Whts the tool called
Link in description
Bought this gadget on Amazon. I didn’t work for me so I sent it back. So I took it to a dodge Chrysler jeep dealership. They fixed it for 215$
Is the scanner the Bluetooth one?
Yeah thinkdiag bluetooth
Which ine are using on the video?@@toolsonabudget7763
Which one is he using on the video?
Which one are you using in the video?
Where can I buy the scanner? Whats it called?
Thinkdiag u can get it on amazon or ebay
Link in description
I have the 2015 Chrysler 200 also but it has the 3.6 in it would the scanner work with this and thanks for the awesome information
What application are you using?
Thinkdiag
A bit slow, but good .
Sure, we all just want the loud clicking in our ears.
On the note of the Vin number what’s the big deal with anybody seeing the VIN number, do you think somebody’s gonna run out there and try to steal your customers car or per se your car?
If you’re taking the time to put videos online, just use the software that allows you to blur it as well
If you noticed, there’s people that actually do that which some of it can be done automatically just by clicking
It’s really not that big of a thing I work on vehicles every day all day I take photos of Vins all the time
will this work on a 200 s with the 3.6 in it?
I got to the part BCM but it doesn’t show special function after what do I do?
send me a pic to my email toolsonabudget909@gmail.com
It’s because you bought the wrong one make sure to buy the one that says 15+ special functions.. I had this same problem then realized I had bought the mini and not the regular one