Спасибо, за подробное видео, сегодня менял мотор вентилятора, только я не снимал патрубок от горловины, а просто отодвигал, ну и антифриза не много слил
So I noticed the shroud on my 21 forte gt makes a vibrating noise when the fan turns on. If I lightly press the top near the left bolt inwards it stops. Like the shroud is loose. But everything seems tight. Have you ever had this issue? Or know a fix for it?
I feel I crossed the transmission fluid cooler lines after replacing the radiator.... The transmission cooler line that is marked with red, is it connected to the upper part of the radiator or the lower connection
You can drain the coolant from the nut, after that run engine for 3-4 minutes lets the water pump pull out the water from reservoir. Other way you might need to have a hose to suck it up from top.
Спасибо, за подробное видео, сегодня менял мотор вентилятора, только я не снимал патрубок от горловины, а просто отодвигал, ну и антифриза не много слил
This guy takes pride in his work, super chill so Calm!!
🤣
Спасибо за подробный обзор 🎉
Thanks for the detailed video.. after flushing the old coolant, is 4 litre coolant enough to fill up the whole system?
yes enough
So I noticed the shroud on my 21 forte gt makes a vibrating noise when the fan turns on. If I lightly press the top near the left bolt inwards it stops. Like the shroud is loose. But everything seems tight. Have you ever had this issue? Or know a fix for it?
I feel I crossed the transmission fluid cooler lines after replacing the radiator.... The transmission cooler line that is marked with red, is it connected to the upper part of the radiator or the lower connection
Did you ever get your issue resolved?
hi bro ... how to drain reservoir tank without taking out whole fan ?
You can drain the coolant from the nut, after that run engine for 3-4 minutes lets the water pump pull out the water from reservoir. Other way you might need to have a hose to suck it up from top.
@@junkitlow i see.. is it ok to start engine after draining bro ?
@@noells5166 it is safe as long as the engine still cool, watch the temparature
@@junkitlow thanks so much for ur sharing..
The original skrew is self thread skrew..no need to tapping new thread.
o i c! learn something, thanks
if you want to do the work right, just remove all you need and don't waste your time.
my spare tank so dirty how to clean??
Put un-cook rice, shake it well can lose the dirrtty
On m