Dustless Grinding & Repoint Brickwork grind & point / rake out fill in

แชร์
ฝัง

ความคิดเห็น • 140

  • @deltajohnny
    @deltajohnny 20 วันที่ผ่านมา

    What a great job!! It took time, but 100% worth it 😍😍😍
    Thank you very much for the detailed information 👏👏

  • @afnankhokhar5578
    @afnankhokhar5578 8 หลายเดือนก่อน +2

    Super informative - thank you for taking the time to explain it in so much detail. I need to have my house re-pointed but the prices I'm being quoted are crazy high - this video gives me the encouragement to do it myself, even if it is just the raking out to save a bit of money. Keep it up!

    • @Mobileblaster
      @Mobileblaster  8 หลายเดือนก่อน +2

      Some people won't like to follow on as they like to rake out 7/12mm that's fine and all but I believe if your doing a job it wants to be the best it can be why not rake out at 35mm+ 😏 just that builders etc don't like filling so much back in 😬 I wish you luck and only advise I could say is don't rake out too much (area wise stay to small areas) and chip away at it so it's not so much of a big project and wait for spring make life easier for yourself its not a nice job to start with no point Freezeing at the same time 😂👍

  • @mdouglaswray
    @mdouglaswray 2 ปีที่แล้ว +4

    Lovely brickwork! I had relatives that did this kind of work so I got to see it up close and understand just how physically tough it is. You do amazing work, Mick! Thanks for sharing with us!

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      Thanks mate yeah it's definitely a younger man's work haha I really need to get the outside water tite this yeah I'm fed up of putting pans and buckets dotted round the house hahaha

    • @22yossi22
      @22yossi22 5 วันที่ผ่านมา

      If ya not used to either labouring on a bricky or been a bricky.....if ya the labourer and the bricky is decent and quick they can lay a 1000+ bricks a day and trust me if youve never laboured you probably wouldnt even be able to load the bricks out and mix the gobbo fast enough never mind keep up to them jointing b4 it solidifies aswell......then if ya as good as me get on the trowell and teach ya self aswell haha. Took me time to keep up with my uncle wen i was working with him trust me and its propa graft. LOVE IT!

  • @secretsquirel5306
    @secretsquirel5306 หลายเดือนก่อน

    Well done. I bought myself one of these mortar rakes and comes with shroud which are available from Sunrise. So instead of using a disc you're using a milling bit. It basically turns your angle grinder into a something like a milling machine. I found this tool was really good for doing the perps.

  • @user-yv9hk2oo5x
    @user-yv9hk2oo5x 6 หลายเดือนก่อน +1

    Mate your awesome. If you haven't finished the house I'll show you what I've learned over fifty years

    • @Mobileblaster
      @Mobileblaster  6 หลายเดือนก่อน +1

      I'm about done on the outside well I've a set of patio doors and a bit of patching up to do round a window but it's all weather tite now 😊

  • @forevercurious1724
    @forevercurious1724 9 หลายเดือนก่อน

    You were excellent at both explaining & showing how to do this. You have a talented cameraman as well. Thank you for making this video.

    • @Mobileblaster
      @Mobileblaster  9 หลายเดือนก่อน

      😊😎👌👍

  • @johndillon5290
    @johndillon5290 11 หลายเดือนก่อน +1

    Great job and effort. That's a good looking house. When you were pointing and said that the mortar was going in too deep, i thought that was the idea, to give it more strength!

    • @Mobileblaster
      @Mobileblaster  11 หลายเดือนก่อน +1

      Thank you 😊 my house I wanted to go as deep as possible but for realistic expectations from a company to come and a job like this they stick to 8 to 12mm deep unfortunately it's just what happens

  • @joeroad6618
    @joeroad6618 2 ปีที่แล้ว +4

    Your a man of many skills Mick, nice job done, the house looks awesome!

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +2

      Just have to learn pal when funds are short and the jobs are big 😂 only way I could afford a house this size was to take on a massive project that needed alot of work. Got to admit I've enjoyed the challenge and learning new skills 👌

  • @richardbradfield7437
    @richardbradfield7437 ปีที่แล้ว +2

    I know this is about a year old video, but man what a task to take on by yourself! The repointing looked awesome to me, you are doing great work! Your blasting videos are also great and very satisfying to watch. I help my son build his race cars and do a bit of media blasting of parts, in a cabinet, and its my favorite thing to do! Can’t imagine doing it on your level though! A dirty but satisfying job I would think!

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว

      😊thankyou yeah its a dirty job we're the is muck the generally a honest guy trying to put bread on the table for his family 👌👍

  • @matthewlardner5328
    @matthewlardner5328 ปีที่แล้ว +1

    Mate, if your neighbours complain about you making any dust with how you are doing that they should come and see how a gang are doing it over the road from me !!!! You are doing a proper job 👍🏻 Super considerate 👍🏻

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว +3

      Thank you, I try my best with my neighbours but the amount of work I've done on the house they now report me for every project :( The house is pre 1920s its going to need work..

  • @timtunbridge
    @timtunbridge 11 หลายเดือนก่อน

    Nice work. I watched from beginning to end. I have brick paths that need repointing and learnt a lot from your video. Thanks for taking the time to make it. Cheers.

    • @Mobileblaster
      @Mobileblaster  11 หลายเดือนก่อน

      Glad it helped out 👌👍

  • @robertmccall8666
    @robertmccall8666 2 ปีที่แล้ว +1

    Man that's allot of work ...highly motivated and no give up in you. Nice job that's a massive task to take on.

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      If you think the out side was a big project I've had to learn a hole load of skills for the inside 😬

  • @andrewbeaumont5492
    @andrewbeaumont5492 ปีที่แล้ว +4

    I too think the original is lime mortar as someone has commented below, the house being built about 120 years ago, so about 1900, give or take twenty years. I suspect the removal of the render has taken the surface off the bricks, hence the ‘wire cut’ brick appearance rather than smooth. Time will tell if that’s a problem. Ivy is horrible stuff to remove from a wall and it gets into a brick often a little bit. Your lead-work looks fine to me. Sometimes when people use a grinder to cut out old mortar they cut into the brick leaving a wider mortar joint than the original, but the cutting disks are available in differing thickness. The new mortar does want to be in all the way. The jointer pushes it in besides giving a finished look, also it compresses the joint, squeezing the sand grains together where the water was. Mortar, unlike gypsum plaster, does not expand on setting, it shrinks slightly.

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว

      I always thort lime was a light colour and somewhat flexible in the areas that oxygen cannot cure. The motor looked like something they pulled out of the ground (with it been a coal village) and it been dark gray and small lumps of black stuff that resembles coal I persumed it was some sort of coal and ash mix with something else I could be wrong though

    • @andrewbeaumont5492
      @andrewbeaumont5492 ปีที่แล้ว +1

      @@Mobileblaster Colour depends on the sand used. Gritty sand can be dark, see 'river sand' or 'sharp sand' at a modern builders merchant.

  • @FiresandFireplaces
    @FiresandFireplaces ปีที่แล้ว

    Excellent job. I am so impressed with your dedication and hard work. Thank you so much for sharing this video. You are an amazing guy. God bless you

  • @Xfacter
    @Xfacter 5 หลายเดือนก่อน

    Satisfying to watch. With love from America

    • @Mobileblaster
      @Mobileblaster  5 หลายเดือนก่อน

      Thank you 😊 👌👍

  • @paulsleczka195
    @paulsleczka195 11 หลายเดือนก่อน

    Hi, sterling job. I've been pointing for more years than I care to remember. I now use King Fisher pointing mixed with their pointing solution. And a pointing gun. It's super easy to use and comes in different colours. I mix dark grey and light grey to get somewhere inbetween.

    • @Mobileblaster
      @Mobileblaster  11 หลายเดือนก่อน +1

      Thanks 😊 I ust to rake out for a job before doing blasting but I could never make enough money putting it back in 😂 we got £3 a meter to rake out and £4 a meter to fill in this is going back some years the boss was charging the council £35 a meter all them years ago he provided scaffolding and tools contract etc so not too bad I suppose 😆

  • @canalboating
    @canalboating ปีที่แล้ว

    Great Job what a transformation I thought it was fairly new brickwork at the start 👍

  • @keithrimmer3
    @keithrimmer3 2 ปีที่แล้ว +1

    They used crushed cinders sand and lime Micky years ago done proper and last for a long time mate.

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว

      Ah 👍 I wasn't sure what it was. Its lasted over 100 years as I was told this house is pre 1920s with it not having cavitys so dating back to this time or before

  • @leojilka
    @leojilka 6 หลายเดือนก่อน +1

    Really good video Thank you !!!!

  • @danieljdempsey8478
    @danieljdempsey8478 11 หลายเดือนก่อน

    Fair fucking play mate! Just had the front of a house glass blasted, finished raking out and jet washing today. Been a good bit of graft already! Them sand / glass blasters are a game changer! Top work bud

    • @Mobileblaster
      @Mobileblaster  11 หลายเดือนก่อน

      😊 very messy line of work but the results speak for themselves 👌👍

  • @22yossi22
    @22yossi22 5 วันที่ผ่านมา

    Came in handy this. Its a right ball ache when thers a number plaque or a hand rail or when you get close to a door or window init haha i need to get a hammer chisel

    • @Mobileblaster
      @Mobileblaster  4 วันที่ผ่านมา

      Sds drill will help get local and save alot of time 👌👍

  • @davegill7614
    @davegill7614 3 หลายเดือนก่อน

    Really enjoyed that watch mate...great job...looks fab....im guessing to grind out and repoint a house that side would take 1 person 2 to 3 weeks?

    • @Mobileblaster
      @Mobileblaster  3 หลายเดือนก่อน

      Thank you grinding is the fast part you can cover quite a large area faster than you think it's the filling in that would be better with 2 people 😊👌👍

  • @aaronrodriguez7786
    @aaronrodriguez7786 ปีที่แล้ว

    Thank you this video explains everything and all the stuff i need thank you again nice video and work .

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว

      Your welcome I appreciate your comment 😊

  • @scottkenzig5144
    @scottkenzig5144 ปีที่แล้ว

    Your a man of many talents Mick. That was interesting. Great job mate.👍

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว +1

      I posted this video because it kinda gose hand in hand with many jobs I've done on building sites I blast the building and the next process is usually repoint then windows gutters so I wanted to show its easier than some folk make out and fairly DIY friendly with the right gear 👍 if you look on my play list I have the bathroom makeover video back to brick refit I don't fink I've posted the last video yet I will edit the video 1 day and put the finished product up 👍

    • @scottkenzig5144
      @scottkenzig5144 ปีที่แล้ว +1

      @@Mobileblaster look forward to that mate. Always good to get great ideas ✌️👍

    • @scottkenzig5144
      @scottkenzig5144 ปีที่แล้ว

      @@Mobileblaster just watched this video again Mick and I noticed that Jack was wearing the same Nike (thongs) slippers, shoes I wear. 😆

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว

      @@scottkenzig5144 haha do ya konw what thongs are in England? haha

    • @scottkenzig5144
      @scottkenzig5144 ปีที่แล้ว +1

      @@Mobileblaster haha 😂. Yeah g strings. Haha 😂.

  • @philglover2973
    @philglover2973 2 ปีที่แล้ว +1

    Awesome video thanks Mick thanks for your time and consideration top job 😎🇬🇧😷

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      Your welcome mate have you managed to kick the covid to the curb?

    • @philglover2973
      @philglover2973 2 ปีที่แล้ว +1

      @@Mobileblaster yes mate 😊👍 thanks for asking 😊😊🍺🍺

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      @@philglover2973 oh good stuff 👌

  • @user-lt1fx3gd2p
    @user-lt1fx3gd2p 3 หลายเดือนก่อน

    Hi mate , was reading your comments and noticed it was built 1883, not being one, but should of repointed in lime 👍

    • @Mobileblaster
      @Mobileblaster  3 หลายเดือนก่อน

      Not in this village mate watch the video I explain that the original goulash ish sweepings up it was black and soft in this area is built up on Cole dust 😬

  • @adamwrigh8805
    @adamwrigh8805 ปีที่แล้ว

    12.21 "Shouldve uses exterior silicone but only had bathroom silicone" love it !

    • @diy-fi6jq
      @diy-fi6jq ปีที่แล้ว

      also damp proof membrane instead ov eaves tray good idea on that one...

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว

      😬😊 year on and it's still fine 🙂

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว

      @diy-fi6jq I forgot to say I had some 18" damp left over that's why I thort of that 😬 eav trays arnt expensive it's the hassle of finding and fetching them lol

    • @shares-qg9kw
      @shares-qg9kw ปีที่แล้ว

      I think you could easlily have be a utuber far better than charlie diy and recieve a great income u just neeed a few tweeks Great vidoe please concentrate on this ....

  • @bobwferguson
    @bobwferguson ปีที่แล้ว

    Clean job looks great

  • @Southpoint2019
    @Southpoint2019 ปีที่แล้ว

    Dark mortar is always more intense.
    Sometimes needed.
    I actually like using it.
    I have a Weatherstruck video on my Chanel using the same time as you are here

  • @cliveramsbotty6077
    @cliveramsbotty6077 2 ปีที่แล้ว +1

    shout out to your lad again for getting stuck in

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว

      He's like my shadow I just hope he stays my sidekick and enjoys taking over the business when it's his turn 👌👍

  • @craigbrown4673
    @craigbrown4673 ปีที่แล้ว +1

    Before grinding out and Repointing that is. Thanks

  • @henrybarham9104
    @henrybarham9104 8 หลายเดือนก่อน

    Was good to watch - the mixes recommended, are all over the place ! I reckon I'll go 3-1, as got a Norfolk red brick, end terrace to do, in Gt.Yarmouth. Some of the bricks are rotten.
    Only thing that concerned me with your video, is the area that you racked out !?
    I was under the impression that you still have to work diamond shapes, especially at 30mm depth.
    Am I wrong in thinking that ?

    • @Mobileblaster
      @Mobileblaster  8 หลายเดือนก่อน

      Too strong of a mix anything stronger than 4:1 could be too strong for the brick and course the brick to rot rather than the cement not sure how this works but its definitely a thing. 30mm deep isn't a problem to a 102mm brick 👍 just don't leave it raked out but for a few months will be fine. (Look into chariot pointing that's 10/15mm deep and left like that)

    • @Mobileblaster
      @Mobileblaster  8 หลายเดือนก่อน

      Best thing to use is lime for sure but it's harder to work with 👍

  • @swiggy03
    @swiggy03 11 หลายเดือนก่อน

    Great vid Mick ,looks great 👍🏻 is the dust cover on the grinder any good ? Was going to get one

    • @Mobileblaster
      @Mobileblaster  11 หลายเดือนก่อน +1

      Yeah it would do a project this size(full house) no problem as for a daily basis job then a more professional bit of kit would be advised after doing quite abit with it it was showing some were but for the money worth every penny 👍

    • @swiggy03
      @swiggy03 11 หลายเดือนก่อน

      What grinding blades do you recommend Mick ?

    • @Mobileblaster
      @Mobileblaster  11 หลายเดือนก่อน

      @swiggy03 cheapest better off with the 8mm ones I think they are but toolstation sell them 👌

    • @swiggy03
      @swiggy03 11 หลายเดือนก่อน

      Cheers Mick

  • @screech1973
    @screech1973 7 หลายเดือนก่อน

    Have you hired your scaffolding or is it something you have bought yourself?

    • @Mobileblaster
      @Mobileblaster  7 หลายเดือนก่อน +1

      Yeah its mine I have around 2 of these maybe a little more comes in very handy 😊

  • @nickykirkham9130
    @nickykirkham9130 6 หลายเดือนก่อน

    Maybe use a softer brush then it won't drag it will just knock excess off face off brick.

    • @Mobileblaster
      @Mobileblaster  6 หลายเดือนก่อน

      Soft to medium is the sweet spot ive found but timing is the key when striking off taking the shine off the joints isn't a problem when it drys fully this won't be seen but the snotters left over are harder to remove as long as the face of the brick is flat (no chucks of cement) its really easy to remove staining with a week acid and a light jetwash if cement chucks are left on from brushing off with a soft brush the clean up then needs a stronger acid and harder hitting wash this may lead to damage of the joints that's why I prefer to use a slightly harder brush not really worried about the look of the joint so long as it's not pulling it out brush marks will dry and not be very noticeable 👍

  • @SonofChurchill
    @SonofChurchill 2 ปีที่แล้ว

    Could pay Son 10p to fill up filling gun 😁 Good work much more to do

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      It's not very nice stuff to mess with and it's hard to get hold of good fitting waterproof gloves to keep his hands away from the cement plus he lost interest on the filling in stage 😄

  • @yorblastshotblastcleaning1688
    @yorblastshotblastcleaning1688 2 ปีที่แล้ว

    Tidy job there pal

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      Thanks mate it's been alot of work and alot of money evey room needed new floors new rewire windows plaster plumbing joinery etc etc basically bought the brick shell and I've had to learn how to fix everything els as I go haha

    • @yorblastshotblastcleaning1688
      @yorblastshotblastcleaning1688 2 ปีที่แล้ว

      @@Mobileblaster it’s definitely work it in the long run pal. I started the same, but had no electric or water and had to knock half of down to rebuild!! Took me 8 years to do it!!
      I swore I’d never to it again but just got planning on another 2, 1 bedders to convert!!

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      @@yorblastshotblastcleaning1688 😆 ya love it really I've got planning for a 3 bed bungalow in the back yard 😴 footings and drainage is in but I've got way too much to do on the main house before going any further with that also just got planning to build a dubble garage with business use so I will save £600 a month on no unit that will be awesome when it's built just need the 2nd mortgage to come in now 😬 don't look good though because of covid books 😔

  • @Southpoint2019
    @Southpoint2019 2 ปีที่แล้ว

    That is the grinder I use
    I got 4 of them to last me years and then I buy the bushes from Amazon

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว

      Good buy a little more than most but the power they have definitely worth the investment if the project is a fair size 👌

    • @Southpoint2019
      @Southpoint2019 2 ปีที่แล้ว

      @@Mobileblaster I couple it with the M class dewalt dust extractor 240v
      Only difference between your grinder and mine is yours has what looks like a sankyo shroud where we mine has a dewalt steel shroud.
      Might be one in one of my videos.

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      @@Southpoint2019 yeah the dewalt stuff to do it on a daily basis but for a DIYer a 25£ amozon special will do me just fine 😁 I priced the dewalt up and soon realised I would be happy with the amozon haha
      Yeah I use industrial vacs for my work thats possibly the only bit that's not DIY but a Henry will do the job👍

    • @Southpoint2019
      @Southpoint2019 2 ปีที่แล้ว

      @@Mobileblaster I hear the Henry hoover is actually very good for mortar raking/dust extraction

  • @elleondejuda4681
    @elleondejuda4681 ปีที่แล้ว

    👋 Helio , where did you buy your grinder and dust vacuum?
    Can you give me the exact names for the grinder with cowl and Dust vacuum?
    Thanks man

  • @joannedallas9175
    @joannedallas9175 2 ปีที่แล้ว

    looks like new build

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว

      I'm more than happy with the outcome ☺️ just very expensive 😵 but I can safely say I couldn't afford a house like this if it didn't need alot of work

  • @locien182
    @locien182 6 หลายเดือนก่อน

    them mortar guns are only good for patio jointing other wise u get half the muck on the wall. use hand board/hawk (where ever ur from) and a pointing bar/small tool to compress the muck in firmly then finish off with what ever finish u want. only saying as it looks like u had a lot of cleaning up to do but otherwise good job on diy mate :)

    • @Mobileblaster
      @Mobileblaster  6 หลายเดือนก่อน +1

      Yeah I mentioned that in the video years ago this is how I did it for a living but I've lost my speed/skill and tools 😂 the gun is possibly the most DIY friendly as its real easy to learn and gets the job done. Normally you would only rake out 7/12mm so a hawk and jointer would be way more efficient for that. For me to learn the skills needed for the hawk I reckon the gun was the fastest option I don't intend on doing another project like this well a bit more patching around a door when we remodel the kitchen not enough to put the hours needed to master the hawk for what I do now 👌 but yeah hawk and jointer is definitely the way to go if you plan on doing this work full-time

    • @locien182
      @locien182 6 หลายเดือนก่อน

      @@Mobileblaster yeah true. Wasn't complaining or anything you did a good job but the clean up lol that would of drove me mad 🤣

    • @Mobileblaster
      @Mobileblaster  6 หลายเดือนก่อน

      @locien182 No a new what ya was saying 👍 hawk is the best method but dose take time to master 👍so long as ya get the thick up with brush a very week acid and power washer will soon have it looking like nothing has been done 👌

  • @craigbrown4673
    @craigbrown4673 ปีที่แล้ว

    What would you advice if removing the render as left chisel marking in the brickwork spoiling the surface of the bricks. Mainly minor but doesn't look great. Is there anything I can do to improve there appearance before reporting, suggestions would be much appreciated

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว +1

      If you could upload a short video to TH-cam send the link I can advise what I would do 👍

    • @craigbrown4673
      @craigbrown4673 ปีที่แล้ว

      That would be very good of you mate. I will do that as soon as I get the chance. It would be a shame if after removing the cement render and Repointing in a more traditional lime mortar in an attempt to show the Edwardian brickwork on the gable end that I might have to have it re rendered again. I will message you again soon mate. Thanks for your response

  • @patterdalezipsuzilil
    @patterdalezipsuzilil 11 หลายเดือนก่อน

    It's coal ashes they used depending on when house was built

    • @Mobileblaster
      @Mobileblaster  11 หลายเดือนก่อน

      We just found the original deeds turns out it was built and 1st sold 1883 😬 I original thort pre 1920s because its before cavity was standard practice

  • @MarijnMoritz
    @MarijnMoritz 6 หลายเดือนก่อน

    36.15 That would be me all the time.

    • @Mobileblaster
      @Mobileblaster  6 หลายเดือนก่อน

      Haha it was at this moment he knew he fu**ed up 😂

  • @Thomas-pq2qz
    @Thomas-pq2qz 10 หลายเดือนก่อน

    Think I might have had the whole house rendered and then painted white.Looks like bond was 5 stretchers to one Flemish header.I did a church which had the manse like that the office draughtsmen called it Morrises madness.Split the money and was glad to walk away.
    Next week a guy came on site,asked to see the guy in charge- -walked up and stabbed him in the back four times.Seems he couldn’t keep away from the wives of others.
    Knew his dad,walked our dogs a lot together.The son was ok but was a different guy- -

  • @azza1793
    @azza1793 3 หลายเดือนก่อน

    I just had a quote from a so called “repointing specialist” and it states on the quote that existing mortar will be ground out to a depth of 5mm 🤣🤣🤣 i’m not a newbie to building

    • @Mobileblaster
      @Mobileblaster  3 หลายเดือนก่อน

      When I was working for the council they said a minimum of 7mm at its highest point so basically saying they could check any job any place and if it wasn't a minimum of 7mm they would knock the job we set the depth to 12mm if we dug in anymore we wouldn't make any money filling back in. It only really needs 10mm but it's better if it's deeper

  • @22yossi22
    @22yossi22 5 วันที่ผ่านมา

    Shiiiit man you go way deeper than me your on hourly arnt ya pal 😜 i do price me. £35 per square metre for grindin and jointing. Good money init if ya quick enough

    • @Mobileblaster
      @Mobileblaster  4 วันที่ผ่านมา +1

      It was my own house 😏👌👍

    • @22yossi22
      @22yossi22 4 วันที่ผ่านมา

      @@Mobileblaster my bad mate

  • @GolfTipsTested
    @GolfTipsTested ปีที่แล้ว

    Are you related to “ Deep Digger Dan” ? Serious question lol

  • @mikehuffaker3593
    @mikehuffaker3593 ปีที่แล้ว

    Damn Sam, is there anything you can’t do?

  • @IgorWise
    @IgorWise 2 ปีที่แล้ว +2

    Have you heard of crack stitching?

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +2

      Yeah. This crack is from my own doing and I know it won't move anywhere now as I had to lift 2x RSJ's and the acro prop was stuck so I had to try and lift the brickwork to free the beam and rsj it's all sorted now sat on pad stones 👌

  • @22yossi22
    @22yossi22 5 วันที่ผ่านมา

    If you was grinding oit some BADZ POINTING not jointing and thers smudge all over the brick faces then the customer wants it jointing. Baring in mind some the joints are over 20mil how would u clean the gobbo thats not grindable off the brick or isit not possible.....and the mix im grinding out is literally more a less just cement so its like grinding fkin marble haha??

    • @Mobileblaster
      @Mobileblaster  4 วันที่ผ่านมา

      Cleaning is my main business I have lots of equipment that can move most to all crap off bricks or stone. I would say start with acid and then work my way up if it's still stuck on 👍

    • @22yossi22
      @22yossi22 4 วันที่ผ่านมา

      @@Mobileblaster if the acid dont work what would you use after that mate?

    • @Mobileblaster
      @Mobileblaster  4 วันที่ผ่านมา +1

      @22yossi22 acid 15% and 200bar 24lpm then up the percent of the acid and the bar of the power washer to 38% and 300bar but do test areas as the power increases this fails pull the blaster out 😏👌👍

  • @jakea3419
    @jakea3419 2 ปีที่แล้ว

    Who did you get in to sand blast it haha 😂

    • @Mobileblaster
      @Mobileblaster  2 ปีที่แล้ว +1

      😏 Best guy for the job 😆

  • @froter1
    @froter1 4 หลายเดือนก่อน

    They dont sell grout bags over there?.. it's very hard to watch someone use that hideous contraption , that just barely works. Get a good grout bag and save yourself hours and it's so much easier.
    We have always used grout bags and trust me , I've filled in thousands of feet of mortar joints.

    • @Mobileblaster
      @Mobileblaster  4 หลายเดือนก่อน

      If your doing large jobs with a decent crew it's worthwhile getting ready mix dripped off but they only deliver 8 gobo tubs at once = half of a cement trucks worth. Using pre mix works out very expensive it comes in 15kg bags and it was £17 a bag last time I looked could be close to £20 a bag now when I can buy 1 cement 25kgs £4 and 4x 25kgs sand for £7.40 I end up with alot more (125kgs) at a lot less for the privilege of using a mixer 👌👍

  • @mrboyban
    @mrboyban 5 หลายเดือนก่อน

    Video longer than it should be. Just title it : Gone with the wind.

    • @Mobileblaster
      @Mobileblaster  5 หลายเดือนก่อน

      Maybe so but I wouldn't earn any add revenue on shorter videos 😂🤣

  • @EcoMan-te4vu
    @EcoMan-te4vu 11 หลายเดือนก่อน +1

    @18:10 - Mick, what's the cracking from, lintel or wall ties?

    • @Mobileblaster
      @Mobileblaster  11 หลายเดือนก่อน +1

      I've moved 2 rsjs and rectified this on the inside who ever put them in before dint use pad stones and over time the load cracked the bricks they was sat on making the wall shift a tad buts that's been done now 👌👍

    • @22yossi22
      @22yossi22 5 วันที่ผ่านมา

      ​@@Mobileblaster short cuts aint a good move in building isit haha or trying to skimp n save on materials. If ya not gunna do summat right dont do it at all is what i was tought. And if ya think ya cant do summin properly ask some1 to show ya or practice on ya own shit

  • @sanderjoosten3254
    @sanderjoosten3254 ปีที่แล้ว

    That mortar joint was too wet, now you got all those mortar stains on your'e house..

    • @Mobileblaster
      @Mobileblaster  ปีที่แล้ว +1

      Any dryer and the gun wouldn't pump the mortar. Stains isn't a problem from me. It's my profession to remove such 😎👍