That "plastic" midwoofer frame is actually a type of polymer. Most higher quality drivers frames are either made of cast aluminum or polymer - unlike lower quality drivers that are made out out stamped steel. Both cast aluminum and expecially polymer plastics are strong enough for the application and are non-resonant and are actually superior because of those factors......
Nicely constructed speaker...very tidy cabling and crossover. Not sure what the negative people are complaining about, this is far better than many I have looked at.
I have had the RS6 version for more then 10 years they sound very good , easy to drive. don't use them now as I dont have the space but I only paid £250 all those years ago and they still go for over 300+ on ebay these days still. I know the components inside dont look great but it's the sound that matters. Bit of a bargain imo.
@@sandermustkivi7300 for that price you can also buy the rx6 second hand. You can also search for other brands second hand i once found quadral platin x speakers for just 40 euro's they are a bit old but they still sound good to me and i have the monitor audio bronze bx5 that i bought for 125 euros. Patience is key if you want good speakers for cheap
I have RX8. I have no issue with anything I see in this video. For the price they are great. Open up a pair of $10,000 speakers and you won’t see much different.
I thought the case was made of real wood. But it wasn't, it only got that wood aspect. But...speakers can take a long time to create, a lot of testing, research and all. Building a speaker is not as simple as it may seem. i used playing with building speaker cases. They don't sound very bad, in fact, out of pure luck and as measured by my year alone, some sounded really well. Anyway, creating a perfect speaker is difficult and requires a lot of knowledge. There were some charts which showed speaker sizes, impedance and all and the space required for them to sound well. I greu up in the 90's when all the speakers were, well, squared in shape. But now, producers have to create smaller boxes for their speakers and people want the same sound as it came out from a huge 90's speaker. Yeah, the challenge is great. There are speakers out there which are worth more than the car I am driving. I learned something about sound: 1% better is 50% more expensive.
@@Techscrews Maybe you can give an advice. Got offer to buy silver rs6 with yamaha R-N803D for 950 eur. Or.. Take new Dali Oberon 7 with denon dra-800h for 1700 eur.. Will be difference that big to overprice?
Thanks. Great video. Construction seems pretty good. However, I don't care for the plastic rings and the tweeter seems very disappointing. Thanks again. Cheers.
Так откуда там звук,вы хоть раз видели,что-бы у разработчиков или фанатов звука дома или в ихних шоу-румах стояли колонки с метал.или пропилен диафрагмами?Фиг там,только бумага"православная".А всё остальное пипл схавает.А потом синтетика прёт со всех натур.инструментов!
@@alekzavolkevich4312 Ты застрял в 60-ых. Бумагу уже давно почти никто не использует, и чем больше колонка претендует на натуральный и мощный звук, тем меньше вероятности, что динамики будут из бумаги.
These are real old model monitor audio speakers you should strip and review some current models .. check out the monitor audio website for the latest speakers ....
Having so wide experience are you able anwer: - are expensive speakers build noticeable better than cheap ones? - which manufacturer in general keep qyality standards and old fashioned quality of build?
up to a certain price it can be noticed, for example you can see a completely different build quality in these two videos, even though the manufacturers Pionner and yamaha are large. - th-cam.com/video/DIYcjizViOI/w-d-xo.html - th-cam.com/video/z9AAYqnq59w/w-d-xo.html but I can say that it is not necessary to study the build quality, but it is necessary to listen to the system.
At 8:32 ... BS28-6P 6" Aluminum Cone Woofer 8 Ohm Shielded ($34.99 USD) Parts Express: Ideal for vented enclosures, the BS28-6P 8 ohm 6" driver features an extremely light and rigid aluminum cone for detailed mid to high-frequency response. Key Features: -Aluminum cone with rubber surround creates accurate, detailed response -Unique, cast POLYMER frame provides a sturdy, non-resonant support -Large flat spider for improved linearity -Shielded magnet assembly keeps magnetic field focused on the voice coil
Cool video. Just so you know, I have a pair and the cover in the tweeter does not freely turn as yours did. Your set must've already been taken apart for that to happen is my only guess. 🍻 From Canada
Maybe you can give an advice. Got offer to buy silver rs6 with yamaha R-N803D for 950 eur. Or.. Take new Dali Oberon 7 with denon dra-800h for 1700 eur.. Will be difference that big to overprice?
Mine has just started smoking and stopped making sound while being driven by a Linn LK140 amplifier. I guess some component(s) have burnt/failed and the culprit is possibly in the input/cross over circuitry as no sound is coming out. The amp is rated at 95 watts into 8 Ohms (140 watts into 4 Ohms) with the speaker being rated 6Ohms and 150W, I don't get it! . Just using a simple setup (no biwiring). I can't see any protection from the teardown here but will check in the actual speaker. Any comments would be appreciated.
resistor or cap went dead, amplifier sent to much current to speakers,dc voltage must be checked at amp output with simple multimeter ,some manufactures using resetable fuses inside crossover
In my case this is a lie. Had to replace a tweeter. the wires was super short. Had to rein them in with pliers to connect to the point where I was concerned about integrity. I had 15mm to work with.
@@Techscrews Plastic/composite baskets are non-resonant and sturdy, it is NOT a bad thing to use on speaker baskets. They are not made from cheap toy plastic...
@Nikola TeslaMaybe because the Gold range is way more expensive ? Instead of blablating about a basket material just look at measurements and you'll see how those MA "evil plastic speakers" measure well (both in frequency response and distorsion) and perform way above other overrated companies with measurements looking more like rollercoasters. Designing a speaker is not just about the basket material of the drivers...
@Nikola Tesla For me, overrated companies are Klipsch or B&W for example. Klipsch because ... well, it has become a marketing brand selling speakers, and B&W because of their very particuliar sound and horrible measurements, as if you applied a crappy EQ preset. Now, speaking about the basket material : would you be able to say why plastic is not good for a driver basket, other than by comparing to other companies ? Would you be able to characterize the impact on the sound ? If the enclosure was plastic, it would be problematic. But we are speaking about a basket, which could be any material you want as long as it has the requiered properties. As I said, there are many factors way more important than the basket material.
@@MrZenderOne Yes and as opposed to what uninformed people think, plastic/composite baskets have good properties : non-resonant and sturdy ! It is not made from "toy-grade" plastic haha.
I plan to buy speakers so far I've been thinking of jamo series 8 the entire set, the guy at the showroom recommended MA bronze. Which one is better kindly help clarify
@@sharathSizZle Check out comparison of Bronze and Silver at my channel. Silver sound much better. I have always had Bronze and a week ago I bought Silver for the first time in my life and now I love them. :) I am selling my Bronze series.
@@LSandM-SpeakersFromEverywhere sucht tweeters are good only for three system builds with high crossover frequency. You can't use them low. And funny how they painted the el cheapo tweeter(15$) like it's a berylium tweeter that costs 200$ and up.
This is actual a decent crossover. Haven't seen any iron core coils or el cheapo electrolyts. But yeah, the workmanship is rather meh and the drivers, especially the tweeter a LOL.
Everything is cheap 😂 the building quality, the speakers everything. I prefer b&w but you have to pay more than 1000$ to get good stuff of b&w on this category i think.
This is why I always find it funny when those so called audiophiles spunk a ton of money on speaker cables when the speakers themselves are connected to cheap wires inside. In fact the the sound passes through miles of cable of varying quality but these geeks think the last little bit from their amp to to thr speaker makes a difference.
External cables must be thicker, because these cables inside are for single drivers and they do not have to be very thick, and you run a cable to the loudspeaker, which is to give the signal for the entire loudspeaker, so it must be even thicker
1000.00 speaker retail cost less than 200.00 in materials. So each speaker is 100.00 and for that price this is a lot of speaker. So does it sound good? Want better parts got to spend more or do a DIY kit. GR Research claims that plastic driver frame is quieter. May be true but plastic does not last long especially Chinese plastic.
Well.... B&W 603s3 ( and 601, 602s3) are built much better: better cabinet - mdf, not a pressed paper. better drivers : bass/mid , built quality and construction , alluminium, not plastic. and way better tweeter. They look expensive, not cheap. p.s. только сейчас понял, что вы - русскоязычный пользователь, лол :) классный канал, очень качественный контент!
Plastic baskets are made from special composite material. It is non-resonant and sturdy. Speaking about the cabinet, I asked a woodworker how he found the MDF quality of some Bronze BX2 speakers and he told me it's good quality MDF. B&W speakers have worse measurements too : B&W 606 : audio.com.pl/images/5/5/0/54550-monitory-bowers-and-wilkins606-audiocompl-lab1.jpg MA Silver 50 : audio.com.pl/images/6/7/8/54678-monitor-audio-silver50-audiocompl-lab1.jpg The Silver are more linear, the 606 have a ragged frequency response with many more irregularities. Speaker tuning is very important and B&W deliberately choses to have those irregularities ... which is a shame because as you say, the components are good too. But please don't say a speaker is crap because it has plastic baskets, it is not a bad thing to have plastic baskets !
Пиздец шляпа....мало того,что саморезы вкручиваются прям в корпус,так ещё и ни одной прокладки меж динамиками нет...хорошо,что я их не купил в своё время...
@@Techscrews Quadral Ascent 650 (660) Quadral Argentum 590 Heco Aleva 400 Heco celan 500 Magnat Quantum 507 Magnat Shadow 209 Canton Chrono 509 Canton Ergo 607 The British fool people with design and marketing. The Germans have the most adequate speakers for the price and quality and do not chase advertising. Know this!
With no voiceover narration this whole thing is kinda useless and more than a little click-baity. Are we to take the cover image at its word? Because there's no objective support for the claims being made in that image.
My English isn't good enough to talk this fluently, so please feel free to share your thoughts in the comments below the video based on your own experience and what you saw.
New Monitor Audio Bronze 6 on Amazon:
- amazon com: amzn.to/3ckTYDp
- amazon co uk: amzn.to/3dlCMPd
- amazon de: amzn.to/2XKwjqG
You should open one of these too 😋
monitor audio silver are superb speakers .
That "plastic" midwoofer frame is actually a type of polymer. Most higher quality drivers frames are either made of cast aluminum or polymer - unlike lower quality drivers that are made out out stamped steel. Both cast aluminum and expecially polymer plastics are strong enough for the application and are non-resonant and are actually superior because of those factors......
thanks for so detailed comment :)
This puzzled me, thanks!
I have had a pair of these beauties since 2009. They still sound epic
Nicely constructed speaker...very tidy cabling and crossover. Not sure what the negative people are complaining about, this is far better than many I have looked at.
I have had the RS6 version for more then 10 years they sound very good , easy to drive. don't use them now as I dont have the space but I only paid £250 all those years ago and they still go for over 300+ on ebay these days still. I know the components inside dont look great but it's the sound that matters. Bit of a bargain imo.
I'm thinking of buying the same rs6 speakers right now. They cost even more today,here is one pair for 400eur
@@sandermustkivi7300 for that price you can also buy the rx6 second hand.
You can also search for other brands second hand i once found quadral platin x speakers for just 40 euro's they are a bit old but they still sound good to me and i have the monitor audio bronze bx5 that i bought for 125 euros.
Patience is key if you want good speakers for cheap
I have RX8. I have no issue with anything I see in this video. For the price they are great. Open up a pair of $10,000 speakers and you won’t see much different.
Now that's some good quality speaker cable inside even many higher end speaker doesn't have it.
I thought the case was made of real wood. But it wasn't, it only got that wood aspect. But...speakers can take a long time to create, a lot of testing, research and all. Building a speaker is not as simple as it may seem. i used playing with building speaker cases. They don't sound very bad, in fact, out of pure luck and as measured by my year alone, some sounded really well. Anyway, creating a perfect speaker is difficult and requires a lot of knowledge. There were some charts which showed speaker sizes, impedance and all and the space required for them to sound well. I greu up in the 90's when all the speakers were, well, squared in shape. But now, producers have to create smaller boxes for their speakers and people want the same sound as it came out from a huge 90's speaker.
Yeah, the challenge is great. There are speakers out there which are worth more than the car I am driving. I learned something about sound: 1% better is 50% more expensive.
i have same...solid made stunning sound tipical british quality !!!! outsanding
Definitely
Actually looks like a very well made cabinet, have seen much worse on much more expensive speakers.
Now that is a solid looking frequency driver 🙂
resistor can be changed to mox or higher grade like mundord supreme,big inductor with core to air coil,caps upgdraded to other high quality film caps
how much will it cost and what % will the sound improve?
Thanks for your work. Many speaker manufacturers don't like to publish pictures of the internal construction and crossovers.
There is nothing to hide,, you buy the sound, not internal construction and crossovers, but always better build sound better for your ears.
@@Techscrews your not wrong, but if you applied that concept to a car for example, would you still be happy?
@@Techscrews Maybe you can give an advice. Got offer to buy silver rs6 with yamaha R-N803D for 950 eur. Or.. Take new Dali Oberon 7 with denon dra-800h for 1700 eur.. Will be difference that big to overprice?
Thanks. Great video. Construction seems pretty good. However, I don't care for the plastic rings and the tweeter seems very disappointing. Thanks again. Cheers.
OK, that was a nice What's Inside video. You're back on track, loved it.
Make more videos with newer speakers to shock the masses... Thanks :)
Had them 10 years and used them with decks blew 6 tweeters in total but at only 55 a tweeter sound amazing
Так, кажется у Сталкера появился конкурент или почитатель! =))
ive had my pair for 13-14 years now - imo for the price they are pretty damn good. but i do run them with more expensive electronics
Monitor Audio не люблю , но пластиковая рама это не так плохо если там хороший антирезонансный пластик. Такой используется например DALI Suite
отделка у них бомба особенно у новых моделей и особенно у 2020-2021 года которые будут. и качественно внутри но вот звук не очень жаль
Так откуда там звук,вы хоть раз видели,что-бы у разработчиков или фанатов звука дома или в ихних шоу-румах стояли колонки с метал.или пропилен диафрагмами?Фиг там,только бумага"православная".А всё остальное пипл схавает.А потом синтетика прёт со всех натур.инструментов!
@@АлександрЗябликов-щ1я сравнивали их c Dali Opticon 8 ?
Название - говорит нам изначально все. Монитор. Всё красиво, нарядно! А где хай фай?
@@alekzavolkevich4312 Ты застрял в 60-ых. Бумагу уже давно почти никто не использует, и чем больше колонка претендует на натуральный и мощный звук, тем меньше вероятности, что динамики будут из бумаги.
That tweeter is shocking!
Hi, can you tell what kind of driver bit you used to remove the drivers? thanks,
These are real old model monitor audio speakers you should strip and review some current models .. check out the monitor audio website for the latest speakers ....
Having so wide experience are you able anwer:
- are expensive speakers build noticeable better than cheap ones?
- which manufacturer in general keep qyality standards and old fashioned quality of build?
up to a certain price it can be noticed, for example you can see a completely different build quality in these two videos, even though the manufacturers Pionner and yamaha are large.
- th-cam.com/video/DIYcjizViOI/w-d-xo.html
- th-cam.com/video/z9AAYqnq59w/w-d-xo.html
but I can say that it is not necessary to study the build quality, but it is necessary to listen to the system.
So Beautiful!
At 8:32 ... BS28-6P 6" Aluminum Cone Woofer 8 Ohm Shielded ($34.99 USD) Parts Express:
Ideal for vented enclosures, the BS28-6P 8 ohm 6" driver features an extremely light and rigid aluminum cone for detailed mid to high-frequency response.
Key Features:
-Aluminum cone with rubber surround creates accurate, detailed response
-Unique, cast POLYMER frame provides a sturdy, non-resonant support
-Large flat spider for improved linearity
-Shielded magnet assembly keeps magnetic field focused on the voice coil
Cool video. Just so you know, I have a pair and the cover in the tweeter does not freely turn as yours did. Your set must've already been taken apart for that to happen is my only guess. 🍻 From Canada
Or these are my magical fingers :)
@@Techscrews Lol if that's the case you keep your wizard fingers off mine please. 😅
I paid 1500 eur 15 years ago. Expensive for what they are but I loved them. Now I am thinking to go Klipstch.
Why klipsch? They high's is too bright, not that sweet sound, that give british and german speakers.
Awesome!
Под динамиками нет резинок или хоть какихто дэмпфирующих прокладок?
Maybe you can give an advice. Got offer to buy silver rs6 with yamaha R-N803D for 950 eur. Or.. Take new Dali Oberon 7 with denon dra-800h for 1700 eur.. Will be difference that big to overprice?
Mine has just started smoking and stopped making sound while being driven by a Linn LK140 amplifier. I guess some component(s) have burnt/failed and the culprit is possibly in the input/cross over circuitry as no sound is coming out. The amp is rated at 95 watts into 8 Ohms (140 watts into 4 Ohms) with the speaker being rated 6Ohms and 150W, I don't get it! . Just using a simple setup (no biwiring). I can't see any protection from the teardown here but will check in the actual speaker. Any comments would be appreciated.
resistor or cap went dead, amplifier sent to much current to speakers,dc voltage must be checked at amp output with simple multimeter ,some manufactures using resetable fuses inside crossover
Why these speaker manufacturers are not routing the internal wires neatly along the edges,instead of these cluttering and loose hanging.
Because there is no audible benefit in doing so.
Even then ,it would have added to the fit and finish of the speaker and attention to detail.
straight in the middle is shorter, so lower impedance for the wiring...
@@mben2781 That impedance advantage is too negligible,if proper quality and gauge wire is used
@@bijuvs46 Agreed. If that means an extra 30cm oer speaker it may also add to costs for the manufacturer...not impressed with those wires though.
In my case this is a lie. Had to replace a tweeter. the wires was super short. Had to rein them in with pliers to connect to the point where I was concerned about integrity. I had 15mm to work with.
Pas 79 versi sultan(horang kaya)😂😀🙏🏻merk beda yah
Much better than what I have but I would expect something a bit better for$1000
I love how they sound, but for me not forgivable these plastic speakers basket.
@@Techscrews Plastic/composite baskets are non-resonant and sturdy, it is NOT a bad thing to use on speaker baskets. They are not made from cheap toy plastic...
@@Subway2400 tell me more... :D
@Nikola TeslaMaybe because the Gold range is way more expensive ? Instead of blablating about a basket material just look at measurements and you'll see how those MA "evil plastic speakers" measure well (both in frequency response and distorsion) and perform way above other overrated companies with measurements looking more like rollercoasters. Designing a speaker is not just about the basket material of the drivers...
@Nikola Tesla For me, overrated companies are Klipsch or B&W for example. Klipsch because ... well, it has become a marketing brand selling speakers, and B&W because of their very particuliar sound and horrible measurements, as if you applied a crappy EQ preset. Now, speaking about the basket material : would you be able to say why plastic is not good for a driver basket, other than by comparing to other companies ? Would you be able to characterize the impact on the sound ? If the enclosure was plastic, it would be problematic. But we are speaking about a basket, which could be any material you want as long as it has the requiered properties. As I said, there are many factors way more important than the basket material.
very goof build quality
i'm shocked about plastic basket
@@Techscrews Harbeth speakers making plastic baskets also
@@MrZenderOne Yes and as opposed to what uninformed people think, plastic/composite baskets have good properties : non-resonant and sturdy ! It is not made from "toy-grade" plastic haha.
@@Subway2400 Do we really want a plastic driver frame? NO! From stamped steel maybe? NOO!! From cast metal? YEEES!!! ;)
@@viktork.8737 Even if it changes nothing? Haha. Just judging the appearances... Lol
how about edifier s760d .... could you do it whats in side
we put it on wish list
Love my Silver 6
For 1k still use a very cheap tweeter with no cavity behind. I have very difficult to accept the sound from tweeter without cavity behind the membrane
Best thing in this video - wooden Soviet ruler. Is your name Artūrs? :D
Грамотно исполненная акустика.
I plan to buy speakers so far I've been thinking of jamo series 8 the entire set, the guy at the showroom recommended MA bronze. Which one is better kindly help clarify
which of the model ?
@@Techscrews Monitor Audio Bronze 2 bookshelf bronze 5 floor standing bronze fx surround bronze center bronze w10 sub woofers over jamo s803 bookshelf s809 floor standing c83 center s801 surround s810 sub woofer
@@sharathSizZle I have Bronze BR6 and new Bronze 500 and the best choice are... Silver! They sound wonderful. Bronze are worse in every aspect.
@@MichalGorkaTruskaw that you for the valuable feedback! 😁 I'm looking at silver already
@@sharathSizZle Check out comparison of Bronze and Silver at my channel. Silver sound much better. I have always had Bronze and a week ago I bought Silver for the first time in my life and now I love them. :) I am selling my Bronze series.
Good job
thanks :)
Сч и нч в одном обьеме?
это не 3-полосная акустическая система, и да, Сч и нч работает в одном обьеме
King Man
that tweeter magnet small huh
Neo magnet ... tweeters don't need a big magnet to sound good , it's really all about the type of dome they use
@@LSandM-SpeakersFromEverywhere sucht tweeters are good only for three system builds with high crossover frequency. You can't use them low. And funny how they painted the el cheapo tweeter(15$) like it's a berylium tweeter that costs 200$ and up.
The drivers are peerless from India .
Non sono più le monitor audio di una volta
No. The new models are much better.
The tweeter seems cheap. Certainly not berylium as the colour wants you to believe.
They've used the gold-ish coloured tweeter for decades
Modify them with completely new drivers... Skar or Dayton
I have the b1s speaker's
Speaker business is 80% marketing bs.
8:26 на сч подвес лопнул уже
4ohm .?????? ( Pop em in ya car then )
Most loud speakers are 8ohm
Wonder what's going on at x over or of its 4ohm on purpose
Cheap crossover and imagine spending 2K on cables that pass electrons to terminals that use cheap plate metal to bridge with those crossovers.
This is actual a decent crossover. Haven't seen any iron core coils or el cheapo electrolyts. But yeah, the workmanship is rather meh and the drivers, especially the tweeter a LOL.
@@indigobaloon8091 for me biggest surprise are speakers driver frame, that fully made from plastic.
Speaker business 80% marketing. Accept it.
Everything is cheap 😂 the building quality, the speakers everything. I prefer b&w but you have to pay more than 1000$ to get good stuff of b&w on this category i think.
@@A.P.I.A.S.T.O.S i have teardown of bw dm603 speakers 🙂
Nun > Schreddern!
Chyba 1000zl bo 1000$ to jakaś pomyłka
you pay extra $ for Monitor audio brand and real wood veneer :)
Za 1000zł to możesz sobie kupić najtańsze kolumny od yamahy ns 51f i to nie do końca...
This is why I always find it funny when those so called audiophiles spunk a ton of money on speaker cables when the speakers themselves are connected to cheap wires inside. In fact the the sound passes through miles of cable of varying quality but these geeks think the last little bit from their amp to to thr speaker makes a difference.
External cables must be thicker, because these cables inside are for single drivers and they do not have to be very thick, and you run a cable to the loudspeaker, which is to give the signal for the entire loudspeaker, so it must be even thicker
@@SpeakerMaster942 Yea, like I was saying it doesn't matter. I could conect them up cost hangers and you could not tell any difference.
Those internal cables were decent quality OFC.
The lacie comentd are bots
Mostly plastic.
1000.00 speaker retail cost less than 200.00 in materials. So each speaker is 100.00 and for that price this is a lot of speaker. So does it sound good? Want better parts got to spend more or do a DIY kit. GR Research claims that plastic driver frame is quieter. May be true but plastic does not last long especially Chinese plastic.
I've owned speakers that are decades old with cast plastic frame. They are fine.
Well.... B&W 603s3 ( and 601, 602s3) are built much better: better cabinet - mdf, not a pressed paper.
better drivers : bass/mid , built quality and construction , alluminium, not plastic.
and way better tweeter.
They look expensive, not cheap.
p.s. только сейчас понял, что вы - русскоязычный пользователь, лол :)
классный канал, очень качественный контент!
спасибо за подробный комментарий :)
@Nikola Tesla How do the newer monitor audio silvers compare the the new b&w's?
Plastic baskets are made from special composite material. It is non-resonant and sturdy. Speaking about the cabinet, I asked a woodworker how he found the MDF quality of some Bronze BX2 speakers and he told me it's good quality MDF.
B&W speakers have worse measurements too :
B&W 606 : audio.com.pl/images/5/5/0/54550-monitory-bowers-and-wilkins606-audiocompl-lab1.jpg
MA Silver 50 : audio.com.pl/images/6/7/8/54678-monitor-audio-silver50-audiocompl-lab1.jpg
The Silver are more linear, the 606 have a ragged frequency response with many more irregularities. Speaker tuning is very important and B&W deliberately choses to have those irregularities ... which is a shame because as you say, the components are good too. But please don't say a speaker is crap because it has plastic baskets, it is not a bad thing to have plastic baskets !
Пиздец шляпа....мало того,что саморезы вкручиваются прям в корпус,так ещё и ни одной прокладки меж динамиками нет...хорошо,что я их не купил в своё время...
I expected better components. This was quite dissapointing
7uuuuuuuuuuuuuuuuuuu7uuuuuuuu
Cheap tweeters
Good cabinet build but cheap tweeter.
Agreed
Very low quality components.
CHEAP TOY!
maybe you can suggest better stereo speakers for $1000 ?
@@Techscrews
Quadral Ascent 650 (660)
Quadral Argentum 590
Heco Aleva 400
Heco celan 500
Magnat Quantum 507
Magnat Shadow 209
Canton Chrono 509
Canton Ergo 607
The British fool people with design and marketing. The Germans have the most adequate speakers for the price and quality and do not chase advertising. Know this!
@@MIRCO2476 I have a pair of Mission m34i
With no voiceover narration this whole thing is kinda useless and more than a little click-baity. Are we to take the cover image at its word? Because there's no objective support for the claims being made in that image.
My English isn't good enough to talk this fluently, so please feel free to share your thoughts in the comments below the video based on your own experience and what you saw.
crap quality / that's why i only buy vintage speakers
Very cheap speakers