Installing protective case to GoPro Hero 10

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ก.ย. 2024
  • this casing really enhances the gopro's deep diving capability to be exact upto 60m deep water diving is possible with this addition. Not only that but will also help in throwing your can in spring done extreme activities like dirt racing, hard terrain sport etc.
    to buy please click on the below link:
    Best Buy:
    www.bestbuy.co...
    Amazon:
    www.amazon.com...
    GoPro official site:
    gopro.com/en/u...

ความคิดเห็น • 64

  • @carlosa.sanchez896
    @carlosa.sanchez896 ปีที่แล้ว +2

    Great how to video! A tip I'd add is when you close the top clasp from behind, while holding the door shut, be careful not to catch the skin at the base of your fingers or the webbing between them in the door. Not only will that stress the plastic and prevent closure, it hurts!

  • @T-bit
    @T-bit ปีที่แล้ว +2

    Glad I watched this as I brought from GoPro and no instructions come with this! Thanks 👍🏼👍🏼👍🏼

    • @carlosa.sanchez896
      @carlosa.sanchez896 ปีที่แล้ว +1

      Mine brought a multi language instruction booklet, but it's mostly pictures with no written step instructions.

  • @eaglescout9901
    @eaglescout9901 2 ปีที่แล้ว +13

    Thank you for going slow, opening that dang door, and put skeleton on.

    • @emmycarter11
      @emmycarter11 ปีที่แล้ว +1

      For real, I could not get it open and felt like I was gonna break it!😂

  • @PANZER_CARPATIN
    @PANZER_CARPATIN ปีที่แล้ว +1

    thank you for the clear video was wondering if the case needed two steps to unlock. But your video helped alot

  • @cristian6498
    @cristian6498 ปีที่แล้ว +4

    Thanks a lot! I didn't know how to change the back part of the case

  • @BodybuildingSteve
    @BodybuildingSteve ปีที่แล้ว +2

    so cant charge using the gopro pass through door with this, dayum was hoping to use with my motorbike hopefully will be wihout the case they seem pretty durable

  • @evrenyolcusu1
    @evrenyolcusu1 3 หลายเดือนก่อน +1

    Ty man

  • @Onzi0
    @Onzi0 2 หลายเดือนก่อน

    when you rotate the gopro with the skeleton door it does annoying noise when recording. Do you know why and how to fix that?

  • @keziahharry7786
    @keziahharry7786 6 หลายเดือนก่อน +1

    Thanks this was really helpful!😊

    • @abhidenzmarine
      @abhidenzmarine  5 หลายเดือนก่อน

      Appreciate your feedback

  • @noahkc
    @noahkc ปีที่แล้ว +1

    Thanks for the review and demonstration. Very helpful.

  • @golfiekid
    @golfiekid ปีที่แล้ว +1

    Thank you.

  • @jalek626
    @jalek626 ปีที่แล้ว +1

    Thank you

  • @BriantFabela
    @BriantFabela 2 ปีที่แล้ว +5

    very helpful thank you

  • @bradz9413
    @bradz9413 ปีที่แล้ว +1

    Thanks mate

  • @gtvnetwork8838
    @gtvnetwork8838 ปีที่แล้ว +1

    Thank's

  • @jimdandy7772
    @jimdandy7772 ปีที่แล้ว +2

    Great Demonstration and review, informative and to the point

  • @keonnikalei2628
    @keonnikalei2628 ปีที่แล้ว +1

    very helpful thank you!!

    • @abhidenzmarine
      @abhidenzmarine  5 หลายเดือนก่อน

      Appreciate your feedback

  • @CheefyArbiter
    @CheefyArbiter 2 ปีที่แล้ว +3

    whenever i open my protective housing for my hero 10 i hear this loud crackling/scraping noise. Is this normal? Maybe it's in the recording but yours opens more "clean".

    • @abhidenzmarine
      @abhidenzmarine  2 ปีที่แล้ว +1

      Yes Sasha it's normal, when I opened the case for the first time it made the same sound but after couple of times I tried and it came out neatly. Try again and if it's still making the same sound please do message me the exact part in my video which is of your concern and I'll get back to you with a solution. Thank you.

    • @KenzyKane
      @KenzyKane 2 ปีที่แล้ว

      Same here, the same concern :)

    • @david94549
      @david94549 2 ปีที่แล้ว

      Yeah it kinda seems broken, mine took an excessive amount of force to open and i thought the mechanism was broken. It feels like one side is stuck down and then it makes a horrible noise and pops open

  • @jameslindemann3139
    @jameslindemann3139 ปีที่แล้ว +1

    cheers mate

  • @burakkunal7349
    @burakkunal7349 2 ปีที่แล้ว +2

    Go pro 9 and 10 protective cover is same?

    • @abhidenzmarine
      @abhidenzmarine  ปีที่แล้ว

      Yes you may use the same cover, it's compatible I guess.

  • @metallicaandchimaira
    @metallicaandchimaira 10 หลายเดือนก่อน +1

    Would this protect the lens from impact or falls?

    • @abhidenzmarine
      @abhidenzmarine  5 หลายเดือนก่อน

      To an extent, YES it will dwindling protect. My gopro have fallen from quite good height and thank God I had the case on and nothing happened to ma gopro including the lens.

  • @kingtacoz4
    @kingtacoz4 2 ปีที่แล้ว +1

    My screen is cracked I’m a GoPro subscriber and just to exchange it is 99 US dollars. Would you recommend the protection case or will the be too much pressure and crack it more? Great video.

    • @abhidenzmarine
      @abhidenzmarine  2 ปีที่แล้ว +1

      It should not increase the crack just because you put the case but at the same time it is not going to help you from protecting your instrument from moisture.

    • @watchmanexpert
      @watchmanexpert ปีที่แล้ว

      @@abhidenzmarine question how is the sound with the skeleton door ? I want to buy one to film under my truck to find one noise. , thanks

  • @leonerickson4652
    @leonerickson4652 2 ปีที่แล้ว +2

    Does this help with audio

    • @abhidenzmarine
      @abhidenzmarine  2 ปีที่แล้ว +1

      It'll not hinder with the audio

  • @shipwrecksguru
    @shipwrecksguru ปีที่แล้ว +1

    How deep can you safely dive when using the skeleton backdoor?

    • @TheRealAestuo
      @TheRealAestuo ปีที่แล้ว

      It isn't recommended to use in water. Use the fully enclosed waterproof case in water. The skeleton door is for accessing the touchscreen and better audio. I would also think that it would slightly help regulate temperature as well.

  • @orion000
    @orion000 2 ปีที่แล้ว +1

    Does this case make the unit get hot sooner? Mine gets hot without the case and I’m wondering if this will make it worse.

    • @abhidenzmarine
      @abhidenzmarine  2 ปีที่แล้ว +1

      Yes definitely, with this case the camera gets heated up a lot faster but using it underwater which is why it's actually made then it won't or even in rain it won't get heated

  • @BloksMotions
    @BloksMotions 2 ปีที่แล้ว +1

    👍

  • @arathysaikrishna3788
    @arathysaikrishna3788 2 ปีที่แล้ว +1

    👌♥️

  • @Sjoefke
    @Sjoefke 2 ปีที่แล้ว

    put my new hero 8 in the casing but the shutter button is not working. Have tempered glass on the back lcd and front lens. But the case button dont touch the gopro shutter button, the power on is working great. Cannot make picure or start camera. Do you have a solution?

    • @abhidenzmarine
      @abhidenzmarine  ปีที่แล้ว

      Sorry buddy but I guess this cover is not compatible with hero 8 it only works with hero 9 and 10

  • @fredrik8685
    @fredrik8685 ปีที่แล้ว +1

    Can I mount this on a tripod or do I need an adaptor for that?

    • @spencergross7244
      @spencergross7244 ปีที่แล้ว +1

      Yes you can. One thing worth noting is when you mount it with something like the chest mount, you cannot pitch the gopro all the way back if it is in the housing

  • @sharonfairchild8739
    @sharonfairchild8739 2 ปีที่แล้ว +1

    This housing will not work with tempered glass screen protectors. Won't close properly.

    • @abhidenzmarine
      @abhidenzmarine  ปีที่แล้ว

      No dear, you got to use it with the product directly without any other accessories except the defogger.

    • @kristeljoyabonalla6469
      @kristeljoyabonalla6469 ปีที่แล้ว +1

      Really? Have you tried it? I was planning to install tempered glass on my go pro. But I will be using it mostly for travel and water activities so I bought a protective housing. Is installing a tempered glass necessary for the screen?

    • @danielkalvito
      @danielkalvito ปีที่แล้ว

      ​@@kristeljoyabonalla6469 Same concern here, I was planning to install the tempered glass but now I don't know if do it or not

  • @noctloxiagaming
    @noctloxiagaming 2 ปีที่แล้ว +1

    Can I put the case on the DJI FPV Drone need advice please :)

    • @abhidenzmarine
      @abhidenzmarine  2 ปีที่แล้ว

      I don't think so coz of the bulging out structure.

  • @utubenepal2496
    @utubenepal2496 ปีที่แล้ว +1

    How to use external mike 😂

  • @wanderer1955
    @wanderer1955 2 ปีที่แล้ว +1

    Where did you get that skeleton back door please, I can't find one anywhere. And does it fit the gopro 8.

    • @abhidenzmarine
      @abhidenzmarine  2 ปีที่แล้ว

      Hi, I got the cover from best buy- ordered it and got delivered. Yes it should fit gopro 8 as well... I don't see any reason why not d the dimensions of both the products are the same. I have put the details of the link from where I got all the accessories in the description of the videos I have uploaded. Please go through. Thanx.

    • @wanderer1955
      @wanderer1955 2 ปีที่แล้ว +1

      @@abhidenzmarine Nice! Thanks. PS. Hate the newly designed Gopros. Took forever to figure out how to open the battery compartment. I had to go on TH-cam in the end. Also hate the back screen display lay out too. I think my Gopro 8 will be my last 😒 Just visited Best Buy. Seems they don't sell stuff outside of the USA. I live in the UK.

    • @abhidenzmarine
      @abhidenzmarine  2 ปีที่แล้ว

      @@wanderer1955 ooh that's bad... did you try in the Amazon app??? Couple of my friends got it through the Amazon.

    • @wanderer1955
      @wanderer1955 2 ปีที่แล้ว +1

      @@abhidenzmarine Yes I looked on Amazon. I bought a waterproof housing, thinking a skeleton back door would be included. It wasn't. I want to put my Gopro8 in a protective case because I like attaching my camera to my bikes handlebars when I go bike riding. But without the protective case the camera could get badly scratched up if I come off. The look of the new Gopros I like, but the rest of the design I hate 😒

    • @abhidenzmarine
      @abhidenzmarine  2 ปีที่แล้ว

      @@wanderer1955 ooh I see, but dude I don't suggest you to use the protective cover if not for under water shooting as the camera is getting really hot.

  • @rustomkanishka
    @rustomkanishka ปีที่แล้ว

    Ah. Mine is stuck.

  • @igorvainshtein5731
    @igorvainshtein5731 ปีที่แล้ว

    helpful but sssoooo soooo slow. talk too much. These are simple processes, do not need to vacillate for 5 + minutes.....

  • @diemlinhngohoang7762
    @diemlinhngohoang7762 2 ปีที่แล้ว +1

    thank you