@@LifeLostSoul I've commented on this a couple times, there's a reason when people encase insects and such in resin they desiccate them first. It isn't hard to find that information, I think Evan and Katelyn are fully aware that all these things are going to rot, but they want to show exactly what happens. I watch knowing it will rot, but it is interesting to see just how it does. And then there's still surprises, like the resin expanding enough to break the glass! Resin usually shrinks.
@@SnowFox102 okay but have they ever acknowledged any of em? Because they normally bring up if things have been mentioned in comments and will try to give an explanation for why the thing happened the way it does, especially if it goes wrong. Plus anaerobic decomposition normally equals gross soup and I feel like they would think "gross soup" would be fun to say over and over. Also when they did attempt to dry out the pumpkins they kept them in plastic bags, trapping the moisture and also creating an anaerobic environment. So I'm not sure they fully understand decomposition based on this. But they should try for a full mummification or embalming process. That would be very Halloweeny. Also I'm sus that the glass break started with the temperature changes while the resin was curing going for ice cold to resin hot and had less to do with expansion... Those glass domes also break really easily
@@LifeLostSoul Yes that pumpkin with salt in a bag without any way for liquid to go out 🤮 But if glass glass was broken when they removed it from Pascal they would have noticed. Glass is ok with temperature change the issue is when it happens too fast. I think it's because of the gas being released by the flower iust expands the volume of the resin not much but since there is no room between glass and resin it's creating a slight pressure on the glass and slight pressure over days is enough to crack it.
Flower preservationist here! Let the rose sit in silica gel for a week to fully dry out. The centers of roses are so dense, you have to spread the layers in the centers to let the silica get in. I use a chopstick. The stick method might work for getting the resin all the way in too. Aside from sitting the whole thing on the vibrator to let the air out. (yes I typed this out in the start and am still typing after the "could have done dried" comment lol) on the flip side, I'm so excited to see this! I haven't been brave enough to waste money on this experiment 😂
You dont have to dry them. I coat them in resin to seal them. I just paint it on and let it cure overnight, then i can put them in my pour. I have piecrs more then 6 years old and flowers look bright and fresh as they day they were cut. And they are not fragile like dried flowers are.
@coolguy-wx6qv They tried using silica alongside salt with their second pumpkin and the silica didn't do anything (while the salt made the poor guy all wrinkly). Idk if there's a stronger type of silica that would work
The reason that the rose looks like that is because the petals are hydrophobic. That is a layer of air making it look frosted. You can see it a bit on the stem, too, but that is a bit different, and likely due to a waxy substance that is naturally on the stem. I'm not certain, but there is likely some kind of chemical treatment you can apply to the petals to remove the hydrophobic nature.
resin companies investing in diy and woodworking youtubers is the best QA testing they could ask for. everyone is so different, many people are just like experimenting with the products. theres always a handful of people that do insane stuff, and also ignore instructions a lot. that combo is best for product testing XD
the beauty and the beast rose but make it resin is such a cool idea tbh! i lowkey want to see you guys make resin "glass slippers" lol, could even do 2 versions, one crystal clear and the other with glitter for maximum sparkle magic!
I had an official Cinderella mini "glass slipper" necklace as a child, which I'm pretty sure was made from resin (with a metal top to the slipper part to connect it to the chain) with some quick image searching, As per the internet, it was from Avon
As someone who's worked with roses in a sale setting, they are SO sensitive to changes in temp, getting them too hot or cold can wilt them and have the petals brown faster, so I was dying when I considered how hot resin gets and then they iced it! A dried flower might be sturdier since the water wouldn't have to expand and contract in the cells as much, causing less damage? Hmm haha might have to do a part two on that
My cousin's kid has made a good bit from her side business of preserving dried flowers in resin, like whole bouquets. It started as an offshoot from her wedding photography business, but it's really grown. And though I can say that while flowers that stand up to drying better do better in resin too, she has gotten some very nice results with roses.
Peter Brown did a rose resin experiment a few years ago, I think he did a few trials actually I'd go check it out if u have a chance. He's got some epic projects too
evans 3d modeling skills are genuinely so impressive and under appreciated!!! The effort it takes to get those measurements as correct as he does is crazy!!!!
Seeing a lil markiplier pop in on one of my evan and katelyn videos might just be the highlight of my year. 3 of some of my favorite creators I thought could never show up together ever I was very suprised ! Anyway, I dont really comment very often but you guys are amazing, thank you for doing what you do. You keep me as an artist inspired after art school when I feel rather unmotivated. I love you guys ❤
Ah, how I wish they saw some of Peter Brown's videos and mentioned him, as that man has mastered the "Rose In Resin" technique... Edit: Also, he's a fellow Resin-ator
@calbertviviers lmao, resin-ator, that's perfect. Peter Brown is really great though- I especially love the toilet paper one he did, back at the beginning of the pandemic
In the end were the glass cracks, I believe that is actually always a risk when pouring resin into glass. Resin doesn't truly hold its shape while curing (especially such large pours), so when put in something as brittle as glass there is a risk of breakage. There is special types of resin that are made for pouring into glass, once they're cured they have a bit of a squish to it which is the same property that makes it so it won't break glass
Katelyn : did you almost drop an ice cube in the resin?? Evan: hahah noooooo😏 Also Katelyn: I saw you almost drop an ice cube in the resin Also Evan: give look of chaos* 6:50 Katelyn literally ten seconds later: drops ice cube in resin*
I really liked this one b/c I've had some real issues preserving roses (100% failure rate). And while this one is still a bit of a fail (the color change) it's not a bad result. At all! In fact I kinda like it better. Also, the glass cracking is another lesson learned. Perhaps next time use a plastic dome and then remove it after curing. The resin itself will be the dome. Over all, you got a real nice result.
🤔 What if someone encased it like this but let it wilt/decay in order to remove all plant mater, then replaced it w/ clear, glittered, or properly colored resin. Even using clear would show as there would still be the inevitable seam between pours. Just have to get all the old rose out.
*narrator voice* Once upon a time there was a Princess and a Prince. Their families promised then to each other as symbol of kingdoms alliance. Prince fell madly in love with a Princess from the first sight. He was sure that she reciprocated his feelings, so he prepred a specjal gift. He gave her magic, red rose in glass dome. 'It's representation of my love. As long as I love, the rose will be ethernal.' he said. Princess gracefully accepted the gift and they relationship became flurishing. At least that's what the Prince thought. However one day, when he tried to make a suprise visitation, he saw his beloved Princess in embrance of other person. He saw in her eyes greater amounts of passion and love, than she ever gave him. He understood that she never loved him and his heart broke into pieces. He walk away without a word and his heart became ice cold. Soon after Prince's father fall to illness and gave up his titule to his son. Now as a King, Prince call off the engagement and demanded to give back his specjal gift. They agreed and Princess arived in King's kingdom with the rose. And that their last meeting. No words exchanged. No caught stares. Just returne of one black rose with frost on her petals and crack on the dome. King fell to the abyss of apathy, while Princess was celebrating marryaging her loved one. Will there ever be someone able to melt down the frozen heart and turn the rose back to passioned red...? Discover it in this story [the end]
If y’all ever try this again, what about making a mold of the glass dome and casting in that? That way you can have the handle top shape without the post-cure bulge cracking anything. Not like the dome is removable anyway 🤷
So I have worked with pressure pot for years and I can tell you the reason it had some mist is from the rapid change in pressure when you had the chicken fly off. That rapid decompression made a change in temperature which made the mist. I hope that helped!
I love how the "words are hard" floral design could straight up be a test for color blindness :D Its cute though, can't distinguish the colors, but love the design
Very cool! The layer like is insane, but the colour change of the rose is so neat. I definitely think with one more iteration this could be perfected, but wheres the memories in perfection?
If I could I would double like your videos, awesome content, thank you. Also a suggestion: When a flower or foliage is'not absolutely fresh, it has lost some of the original water content of the cell structure. This results in a shrinkage of the original cellstructure. The use of isopropyl alcohol is preferred, because it very rapidly fills out the cell structure of the fresh specimen. Put them in alcohol and then in resin.
Catching covid was the perfect excuse to not work and just binge all your videos again. You guys have come such a long way and I love everything you guys do.
So a tip I've seen from other videos is to "flood" the rose with resin so that you minimize bubbles in between the petals, though with your pressure pot I'm not sure if it will make a difference or not? Worth a try though if you ever want to try again ^-^
This is cool; I've been wanting to try this type of thing with fresh flowers for a while. But I was thinking about first taking advantage of the way flower cuttings still absorb water to try keeping them in a preservative solution for a bit first to see if it would prevent rotting and the breakdown of the molecules giving it color. Something like EDTA or an EDTA/NaCl/DMSO solution would be easy to try.
Watching this channel I've gone from envious of Evan and Katelyn's relationship, to being in a long distance relationship for almost two years, still very envious of Evan and Katelyn's relationship, to moving to New Zealand to open future career opportunities and to be with my partner, to having to move in with my partner to satisfy New Zealand's strict and difficult visa, work, and immigration laws. We're looking at rentals in town now, and can I just say - HAHHAHAHAEHEHEHEH OH MY GOODDDDD WE'RE GOING TO HAVE OUR OWN ARTS AND CRAFTS ROOM!!! Life is really difficult right now and I've never been this poor but my first check from my job comes in this afternoon and I've never loved a place or a person so much. I'm so happy and so excited. I hope that I get to do silly artsy shenanigans like this with my partner! It's been a dream of mine for years, especially when watching this channel
4:03- i mix and record music at home, and my mixing monitor setup is the same as Evan’s is here- if anyone suffers from neck pain, having side by side screens, i can tell you, for music production, this stacked setup is the best. Good on you, big E
I just want to heavily thank you guys, I’ve had almost ridiculous sleep issues and watching your uncut streams idk just your voices have given me so much comfort that I can now literally fall asleep with your voices and it’s been so so beautiful to hear your voices talking in my naps. It sounds like I’m calling you guys boring enough to put me to sleep but no 😂😂😂 it’s actually just so comforting to watch you guys that I fall asleep like a baby 😭❤️
One idea to help stop the rot could be to apply uv resin on the rose using a paint brush, curing it, and then casting the full rose in resin. I think it would help get rid of the air bubbles in the crevices too.
Please hang dry a rose in a dark and cool place for a couple of weeks and then put it in resin. It should work much better that way. Also, I missed your resin song this time, such a good song. I'm so excited to see what you do next!
they could potentially spread the rose pedals and maybe use the uv resin to get into the deep crevasses of the rose. theres going to be a lot of "wetness" which probs helped with the bulging and cracking but spreading the rose could release a lot during the chamber
If you try this again I think using all resin in a mold for the "glass" is the better option also if you want more time before the rose starts rotting leave as much of the stem as you can reasonable fit in the pressure pot and cap the cut edge off like they do for bouquets! You will give yourself a little more time that way. I don't know how to stop the color change from happening but saw some other people had ideas you could try. Over all this craft came out really well
17:57 Because there was some moisture in the chamber from the ice probably, but when you dumped the pressure quickly it causes that cloud. You can see the same with a syringe or the old twisting a cheap water bottle and popping the cap off.
I'd Love to see you guys do the jello/needle art. Where they poke colors into the clear molds. Or into whatever medium works best but that is such a fun thing to watch! Hope you try it!!!
I make memorials and resin work for a living,next time you try,grab a bag of silica sand and cover the rose for 2 weeks. It looks as beautiful,keeps color and will not rot or change in resin. Dipping it in resin first helps with bubbles. Also,look into borax crystals. I apply mod Podge or adhesive spray and dip the dried rose then let it dry. After about 20 mins,you suspend it in the boiling borax and it crystalizes. I put them in books,shadow boxes,orbs,so much!!! Next,I can tell you how to preserve mushrooms! They're so pretty in resin.
Interestingly enough, I think they actually attempted drying out one of their pumpkin preservation attempts? Though it was with salt, so I'm not sure how much of a difference that makes, on top of it being more uh, "juicy" than a flower. Also on the mushrooms, is that also for memorial stuff or just a passion project? Bc either way I'd love to hear that, given how much my mom likes mushrooms!
Both. It was a passion project turned full business. It took 3.5 years of trial and error but I figured out the species able to preserve and the ones that didn't. I tried 50 different ways but I use silica sand for them as well and they hold form. They have to dry a while because most mushrooms are made of so much water. I have tried the microwave and oven methods,even knowing they'd fail but I wanted to try. Evan and Katelyn don't stop experimenting till they get what they want so I wanted to offer some tipsaybe they'd try them. I love watching them and when they have projects turn out,they're so adorably excited. I wanted to help. If you're ever curious,look me up. I do have a channel but not a lot on it yet. I had a series of passings but will be uploading all tutorials on everything I make. I am a curious person and like to stretch the boundaries as far as I can just to see what I'm capable of. I'm happy to help anytime,give you any tips or tricks I've learned,I definitely not gatekeep. There's room for everyone's art and I believe the world needs it ❤️❤️❤️ Memorial pieces became a main thing because I made so many for family that it turned it to part of the business. I have cremains and things but mostly funeral flowers so I wanted them to be perfect. It's all I had left. So,I tried till I got it right
I do fresh flowers in resin every..single...day lol. I just coat them in resin with a brush let sit 24 hrs then i can embed them without air escaping, or rotting.
Resin has a higher coefficient of expansion than glass. It's literally hatching. I filled a very heavy-duty glass vase (about the same size as your flower dome, but with 1/2" thick glass walls) and over the next 6 months all 4 sides cracked and split apart.
First!: I liked the Warner Herzog impression Evan was doing for the nature documentary squarespace ad 😆 And second: I know I’m way late on this, but if you actually replace the rose’s water with something like liquid paraffin wax for a few days before you’re ready to preserve it, it’ll help it stand the test of time WAY better; it’ll do much much better. You can also take the rose and dunk it into some melted, liquid paraffin wax and swirl it around a bunch until it’s completely pared with a thin layer, it’ll helps getting all those little tiny crevices coated. You can do that with resin afterwards too, it’ll help a lot! It’s kind of a potential big waste of resin though bc it’ll put a lot of bubbles in the main body of the rest of the resin…. Maybe you could just use that resin to preserve it tho and not need two big tubs of it, one to dip/dunk and one to actually use, but instead combine them. You could vacuum out all the bubbles after before putting it into the pressure chamber? Use a deep pour slow cure resin to do all this? I’m a betting gal and I’d bet it’ll be preserved much better with all those extra steps…😆 if you just coat a fresh rose in wax and do the whole water replacement treatment beforehand as well, it’ll last for at least a year like that alone! Or you could do the silica gel sand method, which will help preserve the rose in the most lifelike way and it’ll make a really beautiful rose without it looking all wrinkly and dried out as it would get if dried by hanging upside down
Maybe you’d have to make a silicone mold of the glass so that you can pour the resin into and have a removable cloche to avoid the bulge 🤣 oooo maybe a cloche with a handle too like in the movie!
This video is great! Fun and I learned a lot. Would love to see a rev 2 with a dried rose in a couple years. Also you guys have a fun playful energy. This channel is a delight!
Honestly though, the crack on the glass makes it a bit more magical like the magic in the rose is expanding and looks more old and weathered. It looks so coooool……
Love this and think it’s a great idea!!! 😊 Just a couple of things that came to my mind whilst watching this video. Use the vibration table to dislodge more of the bubbles before putting it in the chamber. I’m sure there is some root rot preventing powder available in the garden centres or whatever you have in the us. Otherwise love your work and inspiration 😃
That makes no sense. Covering it in hairspray will only preserve it from stuff outside. Water, air and germs are already in the rose, causing decomposition regardless of it being covered in hairspray or resin If anything, resin should be better
I think this is a perfect craft to re-visit sometime in the future, the result is lovely but I would really love to see a more alive version of the rose as well and maybe even see if the post cure bulge can be solved in some way ^^
Could you guys try to recreate the I Hate Steven Singer Gold Dipped Roses? They’re supposed to be real flowers dipped in gold or platinum, but really it’s a rose dipped in resin and the gold is painted on. My husband gifted me one for our anniversary last October and it is gorgeous.
You guys are so cute to watch, it looks like you guys always have a ton of fun together while working on these projects, even when things go wrong lol ☺️
Oooo I love this idea! I have some orchid flowers I would LOVE to resin! I also have found a small (1/3rd the size of their glass one) cloche silicone resin mold on Temu. (Cloche is the name of the dome set) Maybe making the dome from resin, then pouring the flower resin would help "Post Bulge" problems?
Get the new Words Are Hard (Floral) merch at shopevanandkatelyn.com/ til March 30th!
HYYYPE
Katelyn you should make during Halloween a pumpkin will it resin intro cause every year it’s getting better
I legit just ordered the shirt
NO RESIN TIME!!!😡
@@Tomato_Tamato de hecc
An excellent installation to the "Will It Rot?" section of Evan and Katelyn
Yeah and they really need to look into anaerobic decomposition, things don't need air to rot.
@@LifeLostSoul I've commented on this a couple times, there's a reason when people encase insects and such in resin they desiccate them first. It isn't hard to find that information, I think Evan and Katelyn are fully aware that all these things are going to rot, but they want to show exactly what happens. I watch knowing it will rot, but it is interesting to see just how it does. And then there's still surprises, like the resin expanding enough to break the glass! Resin usually shrinks.
@@SnowFox102 okay but have they ever acknowledged any of em? Because they normally bring up if things have been mentioned in comments and will try to give an explanation for why the thing happened the way it does, especially if it goes wrong. Plus anaerobic decomposition normally equals gross soup and I feel like they would think "gross soup" would be fun to say over and over.
Also when they did attempt to dry out the pumpkins they kept them in plastic bags, trapping the moisture and also creating an anaerobic environment. So I'm not sure they fully understand decomposition based on this.
But they should try for a full mummification or embalming process. That would be very Halloweeny.
Also I'm sus that the glass break started with the temperature changes while the resin was curing going for ice cold to resin hot and had less to do with expansion... Those glass domes also break really easily
@@LifeLostSoul Yes that pumpkin with salt in a bag without any way for liquid to go out 🤮
But if glass glass was broken when they removed it from Pascal they would have noticed. Glass is ok with temperature change the issue is when it happens too fast.
I think it's because of the gas being released by the flower iust expands the volume of the resin not much but since there is no room between glass and resin it's creating a slight pressure on the glass and slight pressure over days is enough to crack it.
Did you mean: "addition"
Flower preservationist here! Let the rose sit in silica gel for a week to fully dry out. The centers of roses are so dense, you have to spread the layers in the centers to let the silica get in. I use a chopstick. The stick method might work for getting the resin all the way in too. Aside from sitting the whole thing on the vibrator to let the air out. (yes I typed this out in the start and am still typing after the "could have done dried" comment lol) on the flip side, I'm so excited to see this! I haven't been brave enough to waste money on this experiment 😂
Came to the comments to find this!! Best way to preserve the shape and color of the flowers is to dry them in silica gel crystals for sure :))
pspspspsps *SPEND* money, SPEND; XD
i wonder if maybe this would also assist with the yearly pumpkin preservation?
You dont have to dry them. I coat them in resin to seal them. I just paint it on and let it cure overnight, then i can put them in my pour. I have piecrs more then 6 years old and flowers look bright and fresh as they day they were cut. And they are not fragile like dried flowers are.
@coolguy-wx6qv
They tried using silica alongside salt with their second pumpkin and the silica didn't do anything (while the salt made the poor guy all wrinkly). Idk if there's a stronger type of silica that would work
The reason that the rose looks like that is because the petals are hydrophobic. That is a layer of air making it look frosted. You can see it a bit on the stem, too, but that is a bit different, and likely due to a waxy substance that is naturally on the stem. I'm not certain, but there is likely some kind of chemical treatment you can apply to the petals to remove the hydrophobic nature.
damn thats messed up. let water get married 😠😠😠
@@despacitojones5297Ok, dad. 🙄😂
that is really interesting
interesting!
Maybe hairspray?
I like how Total boat also gets to discover the limits of their products via your projects
whenever they need to quality check something without being suspicious they ask evan and katelyn if they want to be sponsored
resin companies investing in diy and woodworking youtubers is the best QA testing they could ask for. everyone is so different, many people are just like experimenting with the products. theres always a handful of people that do insane stuff, and also ignore instructions a lot. that combo is best for product testing XD
Please make a sassy Shirt with "Resin would never"
Omg we need this right now Katelyn
Or one that says "Expect the bulge" but actually maybe not💀
@@taylorwalker7417 They're not that type of channel...maybe?
I’d buy this one ! Resin would never
With “but it’s all resin” on the back 😂
the beauty and the beast rose but make it resin is such a cool idea tbh! i lowkey want to see you guys make resin "glass slippers" lol, could even do 2 versions, one crystal clear and the other with glitter for maximum sparkle magic!
Ooo that would be fun!
I had an official Cinderella mini "glass slipper" necklace as a child, which I'm pretty sure was made from resin (with a metal top to the slipper part to connect it to the chain)
with some quick image searching, As per the internet, it was from Avon
That would such a good idea! In fact, they could even make a series where they make iconic items from Disney movies.
5:45 - Sarcastically saying "Professionals" while using Comic Sans, is a a nice extra layer touch. :P
The rubber chicken on the pressure chamber is a perfect example of how these two are so genuinely meant for each other.
As someone who's worked with roses in a sale setting, they are SO sensitive to changes in temp, getting them too hot or cold can wilt them and have the petals brown faster, so I was dying when I considered how hot resin gets and then they iced it! A dried flower might be sturdier since the water wouldn't have to expand and contract in the cells as much, causing less damage? Hmm haha might have to do a part two on that
My cousin's kid has made a good bit from her side business of preserving dried flowers in resin, like whole bouquets. It started as an offshoot from her wedding photography business, but it's really grown. And though I can say that while flowers that stand up to drying better do better in resin too, she has gotten some very nice results with roses.
Peter Brown did a rose resin experiment a few years ago, I think he did a few trials actually I'd go check it out if u have a chance. He's got some epic projects too
evans 3d modeling skills are genuinely so impressive and under appreciated!!! The effort it takes to get those measurements as correct as he does is crazy!!!!
If I put my fresh relationship in resin, will it preserve it?
I mean maybe but you may have to dehydrate it
No
Yes, but it will never grow
It'll be like the first pumpkin they put in resin
@@Pope_Pandanot Francis 😭
As a man in my 40s I can’t believe I have to say this…
needs more sparkles ✨
Lol
the "inevitable bulge" is a great band name
Or a name for a maternity clothing brand 😂
budgy smugglers new slogan
Or for a gay bar
Me every morning after waking up tbh
Your version turned out WAY BETTER than the Disney one!
you did the "we have technology" but didnt do "careful spongebob" when putting it in the chamber. missed opportunity 🤣
haha we should have!
Seeing a lil markiplier pop in on one of my evan and katelyn videos might just be the highlight of my year. 3 of some of my favorite creators I thought could never show up together ever I was very suprised !
Anyway, I dont really comment very often but you guys are amazing, thank you for doing what you do. You keep me as an artist inspired after art school when I feel rather unmotivated. I love you guys ❤
thank you so much!
Yeah I loved the lil markiplier too y'alls content just gets more and more amazing each and every video!
Ah, how I wish they saw some of Peter Brown's videos and mentioned him, as that man has mastered the "Rose In Resin" technique...
Edit: Also, he's a fellow Resin-ator
@@calbertviviersSend all the resin using TH-camrs to the Resination!
@calbertviviers lmao, resin-ator, that's perfect. Peter Brown is really great though- I especially love the toilet paper one he did, back at the beginning of the pandemic
In the end were the glass cracks, I believe that is actually always a risk when pouring resin into glass. Resin doesn't truly hold its shape while curing (especially such large pours), so when put in something as brittle as glass there is a risk of breakage. There is special types of resin that are made for pouring into glass, once they're cured they have a bit of a squish to it which is the same property that makes it so it won't break glass
Katelyn : did you almost drop an ice cube in the resin??
Evan: hahah noooooo😏
Also Katelyn: I saw you almost drop an ice cube in the resin
Also Evan: give look of chaos* 6:50
Katelyn literally ten seconds later: drops ice cube in resin*
Laughing so hard at thiiisss she gave him so much stink 🤣
I choked on my water omg lmao twas karma
I had to watch this three times 😂
I really should have seen this coming
Omg I’m crying they commented @@EvanAndKatelyn
I really liked this one b/c I've had some real issues preserving roses (100% failure rate). And while this one is still a bit of a fail (the color change) it's not a bad result. At all! In fact I kinda like it better. Also, the glass cracking is another lesson learned. Perhaps next time use a plastic dome and then remove it after curing. The resin itself will be the dome. Over all, you got a real nice result.
I really like the way there's kind of a ghost rose being left in the resin as it wilts
🤔 What if someone encased it like this but let it wilt/decay in order to remove all plant mater, then replaced it w/ clear, glittered, or properly colored resin. Even using clear would show as there would still be the inevitable seam between pours. Just have to get all the old rose out.
Your sponsorships are the only ones that i never skip
You should make a keyboard where all the key caps are made of silicone. It would be so jiggly and satisfying.
I feel like that would be a nightmare to type on but I also really want to see it 😂
Yes that would be so entertaining
By far one of my most favorite channels, but also my most favorite influencer couple. ❤ y’all are entertaining and a riot. Keep it up!
I feel like the crack makes it look cooler, it adds to the aesthetic
Right?! It’s even more gothic and dark fantasy now
*narrator voice*
Once upon a time there was a Princess and a Prince. Their families promised then to each other as symbol of kingdoms alliance.
Prince fell madly in love with a Princess from the first sight. He was sure that she reciprocated his feelings, so he prepred a specjal gift. He gave her magic, red rose in glass dome. 'It's representation of my love. As long as I love, the rose will be ethernal.' he said. Princess gracefully accepted the gift and they relationship became flurishing. At least that's what the Prince thought.
However one day, when he tried to make a suprise visitation, he saw his beloved Princess in embrance of other person. He saw in her eyes greater amounts of passion and love, than she ever gave him. He understood that she never loved him and his heart broke into pieces. He walk away without a word and his heart became ice cold.
Soon after Prince's father fall to illness and gave up his titule to his son. Now as a King, Prince call off the engagement and demanded to give back his specjal gift. They agreed and Princess arived in King's kingdom with the rose.
And that their last meeting. No words exchanged. No caught stares. Just returne of one black rose with frost on her petals and crack on the dome.
King fell to the abyss of apathy, while Princess was celebrating marryaging her loved one.
Will there ever be someone able to melt down the frozen heart and turn the rose back to passioned red...?
Discover it in this story [the end]
@@lilik7323this is beautiful
Makes it dramatic.
I loved when Peter Brown tried this and i loved your version, too! I think trying one of those "forever" roses could be cool!
If y’all ever try this again, what about making a mold of the glass dome and casting in that? That way you can have the handle top shape without the post-cure bulge cracking anything. Not like the dome is removable anyway 🤷
I think that would be a better end product now that we know the glass will crack!
@@EvanAndKatelynI was wondering if the glass could be carefully cracked and removed from the current one.
@EvanAndKatelyn you should dry the rose in silica gel first, it preserves the colour and shape while removing excess moisture.
Can you make a resin fish tank with 3D printed fish?
That would be so cute for the background. With lighting in the background to make the colors pop.
Oh and they could bust out their glow in the dark plants for it too!
With resin fish! 🐟🐠
yessss this would be so cool! they should do jellyfish and corals and stuff
omg that sounds SO cute
So I have worked with pressure pot for years and I can tell you the reason it had some mist is from the rapid change in pressure when you had the chicken fly off. That rapid decompression made a change in temperature which made the mist. I hope that helped!
Isn’t that right pascal
EVAN: SLAPS AGGRESSIVELY
No dance party! We have you on cameras!
Now that was a funny SquareSpace ad - love the attempt at a David Attenborough impression
Evan’s huge smile whenever he does something wrong is cute.
Commander Keen! I haven't seen that in years. Dos games were so much fun, even though I was pretty bad at it.
3:35 I love how this section is called “Evan already broke something” 😂😂
Absolutely loved that it turned purple!! Looked stunning purple tbh!
I love how the "words are hard" floral design could straight up be a test for color blindness :D Its cute though, can't distinguish the colors, but love the design
Magic is cool but resin magic? Unbeatable! Can't wait to see that rose defy time. 🌹✨
Between the finger-ice bath here and Safiya's full-arm candle dips, poor Evan is getting the worst "Sauna-polar plunge" experience ever!
Very cool! The layer like is insane, but the colour change of the rose is so neat. I definitely think with one more iteration this could be perfected, but wheres the memories in perfection?
Lol Katelyn's foreshadowing kills me every time
If I could I would double like your videos, awesome content, thank you.
Also a suggestion:
When a flower or foliage is'not absolutely fresh, it has lost some of the original water content of the cell structure. This results in a shrinkage of the original cellstructure. The use of isopropyl alcohol is preferred, because it very rapidly fills out the cell structure of the fresh specimen.
Put them in alcohol and then in resin.
Evan’s David Attenborough impression is shockingly good
Ok, i laughed WAY too hard at the chicken depressurization sound dampener. I'm in tears. 😂🤣
Can I just say I have always loved the editing job you guys do? It’s clean and looks so amazing and fun!
8:17 you guys.... "CNC Music Factory" was RIGHT THERE!!!!
The moment the chicken flew off I died. 😂 Thank you so much for this.
What an honest, brilliant video! Thanks for making it!
Catching covid was the perfect excuse to not work and just binge all your videos again. You guys have come such a long way and I love everything you guys do.
Watching Evan and Katelyn while crocheting >>>>
So a tip I've seen from other videos is to "flood" the rose with resin so that you minimize bubbles in between the petals, though with your pressure pot I'm not sure if it will make a difference or not? Worth a try though if you ever want to try again ^-^
This channel came in my recommended and I got curious, these two people have such contagious lovely energy! Thanks for making my night!
This is cool; I've been wanting to try this type of thing with fresh flowers for a while. But I was thinking about first taking advantage of the way flower cuttings still absorb water to try keeping them in a preservative solution for a bit first to see if it would prevent rotting and the breakdown of the molecules giving it color. Something like EDTA or an EDTA/NaCl/DMSO solution would be easy to try.
Is that a type of embalming fluid??? Because if not, that’s be interesting too
Watching this channel I've gone from envious of Evan and Katelyn's relationship, to being in a long distance relationship for almost two years, still very envious of Evan and Katelyn's relationship, to moving to New Zealand to open future career opportunities and to be with my partner, to having to move in with my partner to satisfy New Zealand's strict and difficult visa, work, and immigration laws. We're looking at rentals in town now, and can I just say - HAHHAHAHAEHEHEHEH OH MY GOODDDDD WE'RE GOING TO HAVE OUR OWN ARTS AND CRAFTS ROOM!!! Life is really difficult right now and I've never been this poor but my first check from my job comes in this afternoon and I've never loved a place or a person so much. I'm so happy and so excited. I hope that I get to do silly artsy shenanigans like this with my partner! It's been a dream of mine for years, especially when watching this channel
17:36 smoke is because of the rapid depressurization
Love your videos by the way
Thanks, I was wondering!
4:03- i mix and record music at home, and my mixing monitor setup is the same as Evan’s is here- if anyone suffers from neck pain, having side by side screens, i can tell you, for music production, this stacked setup is the best. Good on you, big E
All commercials should be Evan and Katlyn Commercials. ❤❤❤
I just want to heavily thank you guys, I’ve had almost ridiculous sleep issues and watching your uncut streams idk just your voices have given me so much comfort that I can now literally fall asleep with your voices and it’s been so so beautiful to hear your voices talking in my naps. It sounds like I’m calling you guys boring enough to put me to sleep but no 😂😂😂 it’s actually just so comforting to watch you guys that I fall asleep like a baby 😭❤️
14:00 I read the newspaper in the sponser. Evan/Katelyn thank you for taking time to write that!
One idea to help stop the rot could be to apply uv resin on the rose using a paint brush, curing it, and then casting the full rose in resin. I think it would help get rid of the air bubbles in the crevices too.
I think this video deserves a redo. I think you should try again with a dried rose and see if you can make it better. I believe in yall!!❤❤❤
Please hang dry a rose in a dark and cool place for a couple of weeks and then put it in resin. It should work much better that way. Also, I missed your resin song this time, such a good song. I'm so excited to see what you do next!
They said they wanted to do it fresh as a challenge to see what happened
they could potentially spread the rose pedals and maybe use the uv resin to get into the deep crevasses of the rose. theres going to be a lot of "wetness" which probs helped with the bulging and cracking but spreading the rose could release a lot during the chamber
That is why they had so many problems. No "Resin Time" song!
If you ever redo this i would recommend using a spray preserver. They make some specific for flowers.
haven't finished watching but so worried about thermal shock on the glass with the ice and the resin 😂
I wonder if that contributed to the glass breaking? 🤔
def missed it
If you try this again I think using all resin in a mold for the "glass" is the better option also if you want more time before the rose starts rotting leave as much of the stem as you can reasonable fit in the pressure pot and cap the cut edge off like they do for bouquets! You will give yourself a little more time that way. I don't know how to stop the color change from happening but saw some other people had ideas you could try. Over all this craft came out really well
17:57 Because there was some moisture in the chamber from the ice probably, but when you dumped the pressure quickly it causes that cloud. You can see the same with a syringe or the old twisting a cheap water bottle and popping the cap off.
you have to dry the rose first, they have a lot of moisture in them. but its kind of cool.
Your ads are so amazing
Never stop being so awesome
ikr :3
They're the best ❤
I'd Love to see you guys do the jello/needle art. Where they poke colors into the clear molds. Or into whatever medium works best but that is such a fun thing to watch! Hope you try it!!!
I would love to see you guys make a Bob Ross toilet seat!
I would love that!
I make memorials and resin work for a living,next time you try,grab a bag of silica sand and cover the rose for 2 weeks. It looks as beautiful,keeps color and will not rot or change in resin. Dipping it in resin first helps with bubbles. Also,look into borax crystals. I apply mod Podge or adhesive spray and dip the dried rose then let it dry. After about 20 mins,you suspend it in the boiling borax and it crystalizes. I put them in books,shadow boxes,orbs,so much!!! Next,I can tell you how to preserve mushrooms! They're so pretty in resin.
Interestingly enough, I think they actually attempted drying out one of their pumpkin preservation attempts? Though it was with salt, so I'm not sure how much of a difference that makes, on top of it being more uh, "juicy" than a flower.
Also on the mushrooms, is that also for memorial stuff or just a passion project?
Bc either way I'd love to hear that, given how much my mom likes mushrooms!
Both. It was a passion project turned full business. It took 3.5 years of trial and error but I figured out the species able to preserve and the ones that didn't. I tried 50 different ways but I use silica sand for them as well and they hold form. They have to dry a while because most mushrooms are made of so much water. I have tried the microwave and oven methods,even knowing they'd fail but I wanted to try. Evan and Katelyn don't stop experimenting till they get what they want so I wanted to offer some tipsaybe they'd try them. I love watching them and when they have projects turn out,they're so adorably excited. I wanted to help. If you're ever curious,look me up. I do have a channel but not a lot on it yet. I had a series of passings but will be uploading all tutorials on everything I make. I am a curious person and like to stretch the boundaries as far as I can just to see what I'm capable of. I'm happy to help anytime,give you any tips or tricks I've learned,I definitely not gatekeep. There's room for everyone's art and I believe the world needs it ❤️❤️❤️ Memorial pieces became a main thing because I made so many for family that it turned it to part of the business. I have cremains and things but mostly funeral flowers so I wanted them to be perfect. It's all I had left. So,I tried till I got it right
I love how extra meme-y the editing on this video is, its just so fun
0:05 "unreliable" that is one way to say that it is currently unaccessable
“Is this even a video? Is this too easy?”
😂
I do fresh flowers in resin every..single...day lol.
I just coat them in resin with a brush let sit 24 hrs then i can embed them without air escaping, or rotting.
Resin has a higher coefficient of expansion than glass. It's literally hatching. I filled a very heavy-duty glass vase (about the same size as your flower dome, but with 1/2" thick glass walls) and over the next 6 months all 4 sides cracked and split apart.
First!: I liked the Warner Herzog impression Evan was doing for the nature documentary squarespace ad 😆
And second: I know I’m way late on this, but if you actually replace the rose’s water with something like liquid paraffin wax for a few days before you’re ready to preserve it, it’ll help it stand the test of time WAY better; it’ll do much much better. You can also take the rose and dunk it into some melted, liquid paraffin wax and swirl it around a bunch until it’s completely pared with a thin layer, it’ll helps getting all those little tiny crevices coated. You can do that with resin afterwards too, it’ll help a lot! It’s kind of a potential big waste of resin though bc it’ll put a lot of bubbles in the main body of the rest of the resin…. Maybe you could just use that resin to preserve it tho and not need two big tubs of it, one to dip/dunk and one to actually use, but instead combine them. You could vacuum out all the bubbles after before putting it into the pressure chamber? Use a deep pour slow cure resin to do all this? I’m a betting gal and I’d bet it’ll be preserved much better with all those extra steps…😆 if you just coat a fresh rose in wax and do the whole water replacement treatment beforehand as well, it’ll last for at least a year like that alone! Or you could do the silica gel sand method, which will help preserve the rose in the most lifelike way and it’ll make a really beautiful rose without it looking all wrinkly and dried out as it would get if dried by hanging upside down
BIRTHDAY VIDEO!!! it is my birthday today and this is the best! I have been watching you guys for years!
Happy Birthday!!
Happy birthday!!
Hope you have a great birthday!
Happy bday, have an amazing night
I love the new editing style from the past few vids. It feels really unique
Maybe you’d have to make a silicone mold of the glass so that you can pour the resin into and have a removable cloche to avoid the bulge 🤣 oooo maybe a cloche with a handle too like in the movie!
2:37 YOOO That transition impressed me so much 😂
That was a very funny Sir David Attenborough skit.
This video is great! Fun and I learned a lot. Would love to see a rev 2 with a dried rose in a couple years. Also you guys have a fun playful energy. This channel is a delight!
Its resin time, resin time, do do do do resin time!!!!
FINNA GET DAT RESIN ON
hey i love your vids
The cracked glass adds to the gothic magic look, makes it look even more tied to a curse.
It definitely looks so cool!! Can't wait for another update
Yoooo they posted omg this is legit gunna cure my depression for the next week
I love watching you 2. I found you when I was looking for something randomly (the concrete video) and have loved everything I have seen since.
Pascal’s new muffling device had me in *TEARS* 😂
I love Evan's David Attenborough voice.
Honestly though, the crack on the glass makes it a bit more magical like the magic in the rose is expanding and looks more old and weathered. It looks so coooool……
Love this and think it’s a great idea!!! 😊
Just a couple of things that came to my mind whilst watching this video.
Use the vibration table to dislodge more of the bubbles before putting it in the chamber.
I’m sure there is some root rot preventing powder available in the garden centres or whatever you have in the us.
Otherwise love your work and inspiration 😃
We use to dip the roses in hairspray to preserve them. If you ever try this again try it with hairspray.
That makes no sense. Covering it in hairspray will only preserve it from stuff outside.
Water, air and germs are already in the rose, causing decomposition regardless of it being covered in hairspray or resin
If anything, resin should be better
I think this is a perfect craft to re-visit sometime in the future, the result is lovely but I would really love to see a more alive version of the rose as well and maybe even see if the post cure bulge can be solved in some way ^^
I absolutely love the look of dead flowers. Putting a full dead flower in resin would be so beautiful (idk if that happens in vid yet)
Could you guys try to recreate the I Hate Steven Singer Gold Dipped Roses? They’re supposed to be real flowers dipped in gold or platinum, but really it’s a rose dipped in resin and the gold is painted on. My husband gifted me one for our anniversary last October and it is gorgeous.
8:17 CNC MUSIC FACTORY!
You guys are so cute to watch, it looks like you guys always have a ton of fun together while working on these projects, even when things go wrong lol ☺️
That sounds like Pumkin Series 2.0 already... And I'm here for it 😂
Oooo I love this idea! I have some orchid flowers I would LOVE to resin!
I also have found a small (1/3rd the size of their glass one) cloche silicone resin mold on Temu. (Cloche is the name of the dome set)
Maybe making the dome from resin, then pouring the flower resin would help "Post Bulge" problems?
7:36
Well its good to see the Black Hole Table is doing...table things...