I'm living in Dominican Reoublic and i personally don't think that there's a better bike than this one in the World.....We have thousands of these bikes on the streets of Dominican Republic......Nice vid my man and enjoy your Bike...God Bless Buddy!!!
Good video. Please post links to the parts or mention where you get them. Also things like tire size or other specs. That info is really helpful to other builders. Thanks! Looking forward to the next steps.
Sweet! I just acquired a c70 3 weeks ago and am in the same process as you. Originally was going street racer like you but since parts in the US are slim to none I'm not willing to buy a $100 part and pay the $200 shipping for it that they want. I'm building a hard tail bobber version instead and custom building all my own parts.
I would think there would be interest, especially how much scooters cost these days. It would probably be worth becoming a US custom parts supplier, and possibly sell some full builds. I can find all kinds of parts but shipping is ridiculous. Even found full pallets of kepspeed parts but have to buy 100 units.
The guys that commented below me seem like could be a good source for a pallet full of different parts. Be nice to get 10 each swingarms, shocks, wheels, forks, bodies.. etc
I just purchased a c70 won it in an auction for $200 bucks and I ran into your video was wondering if you would share were you ordered your parts from. ive found a couple they just don't have a lot of custom parts
I find it very difficult to find information on the wheels from Racing Boy. I have looked for several hours with no luck. Did you call them directly? Did you buy just the rim and then lace the original hub into them? Very confusing on that end. I did find the swing arm.
Alright , looking like you're got a "Sweeet" transformation in mind . What a great looking swing arm, Using the fat tires and wheels means we get to see an actual frame, fender, and fork modification and possibly the steps it takes to do them . You said 13 inches was your new shock length , I take that as the compressed length? "Is #2 ready yet ??
Jason Varnell just when I have time for the build. I worked on episode 2 today. In the future I’ll film all of it, and just release episode each week. This is going to be a pretty drawn out project. It’s gonna be sweet though!
I recently picked one of these up for $30 and have been pouring over stuff to figure out what exactly I want to do with it so I'm very exited to see where yours goes. Subscribed so I can stay updated!
Hello guys from rolling wrench! I am in need of some help. Was wondering if you or any one could help me out. I have a zuma that I bought from my brother he had a 70cc conversion done with a Athena exhaust no intake tho. My problem with it is it keeps blowing the exhaust off after 40+ mph so much so that it pulled the Exhaust studs out of the head..how can I fix it and what exhaust should I get to replace the junk one.
Hello. Where are you getting your parts from? I'm in South Korea and plan to mod a Daelim Citi 100 (basically a honda ex5). I ordered the Zongshen 190cc for it. But that swingarm would be nice...any info would greatly be appreciated.
Any one from world wide wanna custom build this model..you guys can come and visit to malaysia and thailand where you can go shopping for the custom part..in malaysia..there are racing boy and uma racing factory..and thailand they have a custom alloy accersories..
Rolling Wrench ATV Scooter & Motorcycle Repair its just my an idea..you can add on some accersories such as rear disc brake from racing boy brand..or some cool exaust from ahm exhaust brand too from malaysia..just plug n play..
Firdaus Hamdan Firdaus I really want to purchase a Honda Wave engine with the wiring harness and fuel pump for fuel injection. Can you help me? Disk brakes would be sweeet! It’s very difficult to get parts from Thailand and Malaysia here.
Iam from borneo island in malaysia..our place call sarawak..in kuching city..or you can come and visit us..where i can bring you to take a look around for our local bike scene and place where we can get the part for you to bring back..
Hey guys, does anyone have any contacts or websites for wheels bars etc for the cubs ? Building one here in Australia and all of my mates have since left Malaysia. Any help would be awesome
That is cool if you are interested in selling the motor exhaust wiring actually any parts i would be interested to put them on my cub that is missing a motor I am in windsor - detroit area Canada.
I order RTX style 50cc up grade engine 12.5 HP It newly model then Honda club C90 ! look like copy of newly model RTX scooter got big wheel size 17 on it too.
the most produced engine in the world, nothing comes close, bikes, pumps, generators, copied by dozens of manufactures across the world, tour on this engine and parts fall out the tress in the desert,
![Honda Cub C70 Racing Boy [EPISODE 2] 2019](http://i.ytimg.com/vi/KTLQxHcHPqw/mqdefault.jpg)
![Honda Cub C70 Racing Boy [EPISODE 2] 2019](/img/tr.png)
![Honda C70 wide fender modification [EPISODE 3] 2019](/img/n.gif)
I'm living in Dominican Reoublic and i personally don't think that there's a better bike than this one in the World.....We have thousands of these bikes on the streets of Dominican Republic......Nice vid my man and enjoy your Bike...God Bless Buddy!!!
🇩🇴 Hello from the Dominican Republic 🇩🇴
What are the sizes of your wheels and their diameter bro?
Hi…
Good looking Street Cub.
What swing arm do you used (brandname or its custom)
what size u r using front wheel and rear wheel? 3.00/17 and 3.50/17? n ur swing arm.
Good video. Please post links to the parts or mention where you get them. Also things like tire size or other specs. That info is really helpful to other builders. Thanks! Looking forward to the next steps.
Jeffrey Jones sounds good I’ll work on that
Im america living in Thailand and this is what i want to do as i have plenty of shells to pick from and cheap, looks sweet,
Thanks for sharing
My friends
Some of ur best work, IMO, I love this series! At-A-Boy ; for the older work.
Thailand , Philippines, Malaysia build this style bike all the time !
Chris I got the idea when I visited Thailand the first time. I had to have one! I got most of my parts from Malaysia :-)
Please help us with web links to buy the parts...
Hello, good job, i love your work. But can you send me a list of pieces i will have to buy for my modification like you??please
Sweet! I just acquired a c70 3 weeks ago and am in the same process as you. Originally was going street racer like you but since parts in the US are slim to none I'm not willing to buy a $100 part and pay the $200 shipping for it that they want. I'm building a hard tail bobber version instead and custom building all my own parts.
greg0187 these things rock. There is virtually no following in the us. I don’t get it!
I would think there would be interest, especially how much scooters cost these days. It would probably be worth becoming a US custom parts supplier, and possibly sell some full builds. I can find all kinds of parts but shipping is ridiculous. Even found full pallets of kepspeed parts but have to buy 100 units.
The guys that commented below me seem like could be a good source for a pallet full of different parts. Be nice to get 10 each swingarms, shocks, wheels, forks, bodies.. etc
greg0187 I totally would. I think there is a demand for these parts in the us.
Have you purchased a handle bar conversion kit yet? I just drew up mine in CAD today.
muy buena instruciones esta exelente muchas gracias por tu publicaciones sigue a si pana.
Hi great build any chance of sharing the link where to source some parts ( I’m down under Australia Sydney )
I just purchased a c70 won it in an auction for $200 bucks and I ran into your video was wondering if you would share were you ordered your parts from. ive found a couple they just don't have a lot of custom parts
Sweeeet! I have all of the parts listed on my Patreon account
Nice! what year is that
I find it very difficult to find information on the wheels from Racing Boy. I have looked for several hours with no luck. Did you call them directly? Did you buy just the rim and then lace the original hub into them? Very confusing on that end. I did find the swing arm.
Nice black with gold wheels do they come 13 for chinese skooter?
Hello nice build where i can find this swingarm please?thank you.
do you have a link where i can by parts for my honda cub .
I have all the links in my Patreon page
Nice job bro!! Where did you buy that swing arm?
Subscribed. Great video. Going to watch number next.
Sweeet ! Thanks for watching :-)
nice build man, gonna be sweet when it's done :)
nice
Alright , looking like you're got a "Sweeet" transformation in mind . What a great looking swing arm, Using the fat tires and wheels means we get to see an actual frame, fender, and fork modification and possibly the steps it takes to do them . You said 13 inches was your new shock length , I take that as the compressed length? "Is #2 ready yet ??
Elwood Watson part.2 ???????
Good job
hello. Where did you buy rear wide fork? Thank you,
where did you get those wheels / swingarm?
in Indonesia we have much club about this c70 or street cub style, they like classic or kustom style
Hey. Can i ask you somthing can you tell me the size of the wheels? Back and frond? Its 4.25x17 back and 3.50x17 frond?
Intriguing build you go there. Interested to see where this goes...
hi can you send me list of upgrades you made? thanks
Awesome!
So sick to see , Im also building my great granddads Honda ct90 (trail 90)
The blue scooter you working on in this video is that the one you put different handlebars on and why do you start projects before you finish me
Where can I get those LED headlights?
I want to order the rime and the swing arm where i can order it ?
Hola amigo quisiera q me ayudarás a modificar mi honda c90 con tips y consejos
グロムとか125のモンキーってイジる楽しみがほとんど無いと思うね
やっぱり50ベースの90ccとかまでだと思うな。
Saludos desde Colombia . Que tijera o basculante, es là que pusiste a la moto gracias ." No sé inglés disculpa"
How wide for the rear wheel?
How often do you plan on posting update videos for this build?
Jason Varnell just when I have time for the build. I worked on episode 2 today. In the future I’ll film all of it, and just release episode each week. This is going to be a pretty drawn out project. It’s gonna be sweet though!
I recently picked one of these up for $30 and have been pouring over stuff to figure out what exactly I want to do with it so I'm very exited to see where yours goes. Subscribed so I can stay updated!
Hello guys from rolling wrench! I am in need of some help. Was wondering if you or any one could help me out. I have a zuma that I bought from my brother he had a 70cc conversion done with a Athena exhaust no intake tho. My problem with it is it keeps blowing the exhaust off after 40+ mph so much so that it pulled the Exhaust studs out of the head..how can I fix it and what exhaust should I get to replace the junk one.
I didn't even know my country export motorcycle parts
Where can i find that wheel ?
what size of the rim?
swingarm sizes or where i can buy
Hello. Where are you getting your parts from? I'm in South Korea and plan to mod a Daelim Citi 100 (basically a honda ex5). I ordered the Zongshen 190cc for it. But that swingarm would be nice...any info would greatly be appreciated.
Victor Valle i think that is racing boy swing arm..a malaysia made
zainal mohamed thanks!
Any one from world wide wanna custom build this model..you guys can come and visit to malaysia and thailand where you can go shopping for the custom part..in malaysia..there are racing boy and uma racing factory..and thailand they have a custom alloy accersories..
Firdaus Hamdan Firdaus I Love Asia! They have all the cool stuff :-)
Rolling Wrench ATV Scooter & Motorcycle Repair its just my an idea..you can add on some accersories such as rear disc brake from racing boy brand..or some cool exaust from ahm exhaust brand too from malaysia..just plug n play..
Firdaus Hamdan Firdaus I really want to purchase a Honda Wave engine with the wiring harness and fuel pump for fuel injection. Can you help me? Disk brakes would be sweeet! It’s very difficult to get parts from Thailand and Malaysia here.
Rolling Wrench ATV Scooter & Motorcycle Repair sure can pal..did u hve a any watsapp contact or anything to get in touch with u?
Iam from borneo island in malaysia..our place call sarawak..in kuching city..or you can come and visit us..where i can bring you to take a look around for our local bike scene and place where we can get the part for you to bring back..
wow nice! i love customize scooter bike...
u got the swing arm from malaysia...? would you mind sharing the shop details...?
janggoat lebat join group fb 'street cup bitches' bro...
Hey guys, does anyone have any contacts or websites for wheels bars etc for the cubs ?
Building one here in Australia and all of my mates have since left Malaysia.
Any help would be awesome
Kieran Gaffney search "streetcup bitches" group on fb...
My I know what side velg and Tire ?
Tq
Looking sweet
I'm street Cub INDONESIA GUYS
You See Club in Instagram,TH-cam etc.
Good morning, I live in Colombia, you can tell me the store that sells this oscillating arm.
Thank you
Nelson Oliveros,Racing boy es la marca
Wow amazing...
Who does parts for these
just so you know you can get all these parts in the uk also and the postage is a little quicker
where did you get the rims?
Where is episode 4?
Hey there am a big fan from mauritius keep updating pls
Btw how about the battry still 6v ?
deevesh ubhee Thank you! It will be 12v at some point. I may even put a Honda grom (msx) motor in (fuel injected)
Rolling Wrench That would be the ultimate motor! So cool!
Where can i order all the stuff that mention in the video?
Go to my Patreon Page. It’s all in there
@@RollingWrench what is patreon page??
What's the name of the wheel set?
Racing Boy wheels and spokes, it has the stock hubs.
Hi anythings of the bike you dont use if you want to sale,let me know,thanks
Thang Nguyen I’ll keep you posted.
Are you ever going to finish this. 😞😡😞😡
Sheeesh! Someday
@@RollingWrench just would like t see it finish
Brazil also have this bike... me too.
Rodrigo Vitorino new video coming soon!
Nk indonesia kui puluhan juta boss kog mbuk ketok i 😭😭
wow
Dude in nyc there are fleets of these things 🤣🤦🏽♂️😅😂😩👈🏽 who told you there not in USA 🇺🇸 Dominicans pimp then out and make them way crazier than that
Good to know. I have never seen a modded on in the states yet. Except once dude I follow on Instagram. On the west coast it’s rare....
Deadass tho 😂the only bike I haven't seen in the us is a CG, tauro, gato, x1000 etc...
That is cool if you are interested in selling the motor exhaust wiring actually any parts i would be interested to put them on my cub that is missing a motor I am in windsor - detroit area Canada.
kevin rein cool! I’ll let you know. I will be selling some of the parts
Wuao y esos chasis lo vendes
theres thousands of that motorcycle in dominican republic
Rare in Colorado
Sigh....
So F**king cool
Wow 👍👍👍👍♥️♥️
what is the size of the rim?
atthismo chaoman 17x4.25
Rolling Wrench ATV Scooter & Motorcycle Repair thanks a lot
Dude, set the damn camera down on a tripod.
Ok dude, thanks for chiming in.
Come and visit malaysia art of speed event 2020 july
I would looooove to!
попробовал купить в россии подобный тюнинг-прогнали с магазина...
I order RTX style 50cc up grade engine 12.5 HP It newly model then Honda club C90 ! look like copy of newly model RTX scooter got big wheel size 17 on it too.
Niiice! Tag me in it on Instagram!!
@@RollingWrench All most same thing you are making but do not have knee shield! On web. red fox power sport.
What happen to episode 5?
Hope to fine a body when I go to the Philippines 🇵🇭
Like watching a coo with a gun 😩
the most produced engine in the world, nothing comes close, bikes, pumps, generators, copied by dozens of manufactures across the world, tour on this engine and parts fall out the tress in the desert,
Gee wiz... that was a lot of talk and no real action.
Thank for the input
Can you make a video on how to make a honda ruckus faster with upgrade kits and how to install
Midwest Bass Masters A entire series is in the works
Dónde consigo eso aros o riner
Thanks napoleon.
neat
Eman" lek
Why!
Why what? Why ask why
@@RollingWrench Why cut a vintage motor scooter apart like that
David Duffy nothing special, they made millions. It’s the most produced motorcycle in the world.
Too many commercials
Loynas
Sart
Thank you for watching!!
please dont put a chinese motor to it
Ilias Vernadakis Taiwanese.....
Or grom motor
Yah maling pitung indonesia
Indonesian motorcycle :v
VTEC? /watch?v=tv3X5vPbfOc
g
ruiner c50
Where can we get that swing arm?