@@pauliman6257 it’s what I have been using for the last 10 years. Great controller, but having some more info with color lcd displays is something I’m after, plus the slimmer profile and moving away from Avid as much as I can. Though for someone looking for something competitive even if older yours is a great suggestion 👍🏻🙌🏻
The features they did and the stuff you asked for have been the elephant in the room for controllers for decades. If I see the integration you asked for I will buy both. Thanks Dom. BTW some third party devs are working on similar things for other consoles, but none comes close to this level of refinement.
HOLY CRAP, we've hit the motherlode! This could be the first time in years I actually have a reason to ditch my Qcons and all the Mackie protocol limitations for a controllerthat actually works with Cubase. I love my CC121 too but I want more faders! Perhaps this will give other manufacturers a kick up the rear.
I checked it out. This looks great. The Swedish company Softube appears to offer a bundle of the faders and the console for roughly $1,700 right now (mid Sept 2024). So, if you are already using one of the DAW talking to/from this product (who knows? Probably any major DAW), and especially Cubase, as I am, then this is pretty amazing for getting console function going.
this controller sounds so cool. especially the haptic feedback part. So useful for someone like me who is blind. I hope Softube made sure this and the Console One Channel MKIII has support for screen readers. They did a great job for the previous version. :-)
Apologies for OT. Hey Dom, I just had occasion to research some instruments offered to me free and went ‘off-Dom’ as long as I could take it. I’m spoiled rotten getting my demos from you. Thanks for the towering excellence of your musicianship, creativity. The combination is quite rare in the realm of demos and engages me in just the way I need. All the best, Peter.
I was looking into getting the SSL stuff over the last couple of months. I still have a working CC121 but since there is no replacement available I was looking for possible candidates. Luckily I never impulse buy stuff so after seeing this one announced I finally took time to go through videos about it's Cubase integration. THIS IS HUGE! Thanks for posting about this, even with the latency and limit to 100 channels this is the ONLY controller that behaves the way it should in Cubase. Now it's on my list :)
The AVID Artist Mix and the more modern version auto-bank to channels. You can also lock a fader to a single channel. You can also control quick controls. You really need to try one Dom! It's this.. but better. And it has no problem with giant track counts.
I’ve never used a controller that does NOT bank in ProTools. My experience is limited to ProTools so I don’t know if this is a Cubase thing. Controller channels that don’t bank would be a nightmare!
I don’t think the avid comes with emulations of compressors, eq’s, drive etc, that Softube offers? You’d have to map those to it, I guess? What I love about c1 is that I always know which knob to turn, as their system is so well thought out. I like the Softube channel strips so much, that, apart from creative effects (soundtoys) and reverb (liquidsonics) on the c1’s sends, I only use softube for mixing.
Of course, a possible full review would be interesting. Finally an interesting controller that could be considered as a replacement for the already retired SAC 2.2. Thanks Dom!
Very very cool! I absolutely agree with what you say at the end about integrating the Console 1 Channel into the Cubase channel strip. If they did this, I would buy one immediately!
Yessssssss! Great! That is a game Changer! Plaese let us know more and Yes Softube make it more integratet, baybe a slim 2 Fader version ! TNX 4 Sharing 🤩🤩🤩🤩🤩🤩🤩
Btw, thank you Dom for great channel. I know lot about Cubase using it 10 hrs/day for a decades, but alwa,s find something to learn from you. Thanks again
Hey hey! Nice hardware. Avid's s3 or s1 already have track following tho without any insert per channel. It uses Eucon rather than mackie. But FINALLY someone else managed to do this too. Happy to see that!
Ha, you beat me to it Rico! Yes, Avid has had this for years with Eucon integration...the Artist and S-series have done this for a while. But they're very pricey and Eucon has always felt a bit PT centric. Very excited about this...
Absolute agreement with setting up any/all cc's. GOT to be simple addition, they had to send SOME controller data anyhow.. Nice intro. I don't use Cubase, but this could convince me. This IS something i used to spend days setting up with my keyboards. Great potential product and excellent review.
That Console 1 looks hot 🔥! It would definitely be a game changer if they add that MIDI CC Mode option that you suggested, Dom. I believe it would be an instant buy for many of us.
It looks a great combo with the controle. A full review would be great. I hope they use some good brand faders like Alps ,P&G, TKD, or something that will last a little bit with all that dancing around
I have a Icon V1-M and I like the hardware and the possibility to extend it with more channels. It's following the channel selection as well. They are working on a MIDI remote script to replace the Mackie protocol and this will provide channel colors on the displays as well. I have access to the development state and it's promising to me. Really unique as far as I know ist the touch panel that allows to configure the buttons as you like. Dom, I really like your tutorials and reviews and would like to see a review of the V1-M from you
10 faders. SWEET! The embedded haptic control is fly too. But the other features on banking and jump to selection have already been available on AVID's artist mix. I waited on the UL8.. and now the question is Softube's final integration for other DAWs like S1 and Logic. Waiting for the next review with these other DAWs Dom!
As you say, this is very exciting news. I want a review when the product and you are ready. I would also love to see your MIDI CC sugestion implemented
Jeez now after thinking more about it.. I REALLY wish it had the MIDI CC mode/template ability. Both the units. Would make for incredible workflow. If you have their ear on it, please scream it for us composers!😅😊
Full review indeed! + I'd like to know which channel strip you use mostly. And I support the request for templates man. BTW I'm one of the lucky ones who could find the Channel and Fader MK3 in Canada, and I absolutely love this system. I got the channel first, but then the fader and having both of them makes everything so much easier because I can see my tracks names and the output volumes in one go without having to look up at the screen. I do hope they build a transport system with R W Play Stop etc though.
I pretty much agree and like what I see there. I'd like to see at least 8 programable encoder knobs because I prefer this for panning and some other adjustments more than faders.
Thanks for the preview. I've been looking forward to this controller for a few months now. However, after watching it, I am worried if I will be able to use it like the previous version 😲. I will probably be one of the few who is perfectly comfortable with using the console1 plugin. In my workflow, I only use it for quick controlling groups or some selected channels and I don't want it to follow other faders. For single tracks I use my beloved Steinberg CC121.
Man i dont think i can add another USB device to my rig, but im starting to make plans to get rid of some USB hookups so i can take advantage of softubes amazing devices. Yes to the review!
Thanx, Dom, for wonderful preview! Is really Very interesting and progressive controller. It would be interesting to know the availability and cost of the device.
The track selection is the winner. Still core problem remains that all these devices sit where your keyboard and mouse need to be, and you need both keys and console to mix and change things like plugin settings etc. Unless you have a massive desk not a valid option IMHO.
Have to say that this looks amazing!!!! BUT? It is bound to be expensive, and probably way out of my budget? It is good though. Thanks Dom for sharing this with us. Cheers!
This is nice stuff. I'm familiar with flying faders, but this is really different. Really need to work with Logic Pro X and all Keyboards. Very interesting.
Almost perfect - thank you Dom. But where are the transport-buttons? Or did the both of the new Softube Consoles fit on the Steinberg CC121 as the old ones do? I'd really appreciate the full review !!!
Ha Ha!!! I laughed out loud when I saw the colour change. As it's a flashy green colour, it's quite easy to change the colour with Resolve or Premiere.
Many good features in Softube CONSOLE 1 fader, but one thing I am missing is the sync with Cubase Mixer and the fader unit, specifically when hiding channels it does not hide the channels in the fader unit. Hope they fix this soon. After testing it seems to work only in Logic Pro X and Pro Tools, but other DAWs it does not.
My ssl nucleus used to do all of that 10 years ago ! Apart from the clipping thing of course! But you didn’t need to put any plugins in the saw first and it would jump to the selection , nothing new there ! Must say it does look good though-)
A CC button next to each fader would be so practical, rather than a missed opportunity. If that happened, I would buy it. At the moment it has no benefit to me, I'm sad to say. Let's hope Softube picks up on this. I'm glad you have the same thoughts Dom.
The good news is this is not a missed opportunity. Softube can easily use a combination of keys (eg shift+fader) and give us this function in the future :)
@@DomSigalas As stated, let's hope so. Just one button near the faders without having to keep going into sub menus all the time. CC control has always been a priority with orchestral composing. My BCF 2000 and Korg Nano Kontrol serve me well.
@@AMBIOSIS I don't think it needs to be menu diving :) I wouldn't mind a combination of keys- it's better because I hate hitting a button accidentally and going into CC mode ;) Softube are great people and they listen (actually, they implemented several things after I gave them feedback that are already there!)- this was my first request since I started using the prototype :)
@@DomSigalas I totally agree with you Dom, for sure. An extra 'CC' button just under the 'MUTE' button maybe? Could surely not be hit by accident? Like I said, if that was implemented, maybe in the MKIV, I would buy it for sure. This MKIII has already been pressed out in the design shop, so it won't happen with this one. Don't get me wrong, it looks absolutely great with Cubase integration, I wonder if it does so in Wavelab 12 Pro? I nearly bought the MKII, but was told to wait and have a look at the MKIII, glad I did.
I would love this for live mixing when using a rack mixer and an iPad. It’s so much better to have real faders under your fingertips. I wonder if that would be possible??
Looks a great controller but, as someone else has also noted, the Avid S1 already does channel following and pretty much all that has been noted here (except the haptic stuff) without having a plugin on each channel, so it's not the only one out there. I use 4 to give me a 32 channel desk, allowing me control Cubase and any plugin, all fully integrated via Eucon.
I have used the Avid Eucon. Two problems though: 1. It’s primarily targeted towards PT users 2. The new models have this iPad slot that i for one would hate to see on my desk every day without an iPad attached to it. 3. You need an iPad to get the most out of it 4. If you want to get the nice old Eucons you have to buy second hand and with no warranty. And their faders are prone to failing from what is being said. 5. If you have the S1 and love it this is AMAZING news . I was considering it for ages I won’t lie so I see your point 100% If was using PT I would probably evaluate this differently but for Cubase the Softube is a winner once the software is finalized ;)
@@DomSigalas Oh absolutely - there are some things about my set up that could be better, but all in all it works great for me and does what it says on the tin pretty much every day so its an option. The softube kit does look amazing though i have to say. Love the channel - I buy a lot of my gear and software because of your reviews including my amazing studiomaster Commander 2.0 desk - so keep em coming buddy :D
Yes, full review, please. Question: Can the Fader MK3 be used (its faders that is) for gain-staging as well (not only Valume)? Using Cubase 13 I hate to "pick and flicker" between Tracks just to access the Gain-knob for each track.
Hey Dom, got the dominator desk and Console 1 but not yet the fader, I'm here because I'm interested in how you've arranged it on your desk, especially since we need to access the front rack desk. I was considering stacking it to the left or placing it side by side above the computer keyboard. Not sure, any though or a video where we can see what you've done?
Is there a way to connect one button to the listen button in cubase? I use the listen button all the time when I'm mixing to lower the volume of all other channels by 3 db to focus more on that channel and still hear it in context.
Holy cow, this is huge! Im so happy to have a innovative audio company like this based in my hometown!
We need a full review, for sure!!
I definitely would like a full video when it is released- this looks fantastic! 🎉Thanks for introducing it to us Dom! 🙂👍
I've been waiting for a product like this fo years! As always you're the carrier of good news. I'd really appreciate the full review 🙏🏻
avid artist mix
@@pauliman6257 it’s what I have been using for the last 10 years. Great controller, but having some more info with color lcd displays is something I’m after, plus the slimmer profile and moving away from Avid as much as I can. Though for someone looking for something competitive even if older yours is a great suggestion 👍🏻🙌🏻
The feature where it changes with the channel selection has me sold on this unit! Great video! Thx
The features they did and the stuff you asked for have been the elephant in the room for controllers for decades. If I see the integration you asked for I will buy both. Thanks Dom.
BTW some third party devs are working on similar things for other consoles, but none comes close to this level of refinement.
Thank you for all your great videos !
No transport - no CC's - $999 - no way.
Really it s 1000$??😕 to me this worth not more then 300$.
Its a good point, we need a transport button, iam console one user and I don't like drop the console to start a project in keyboard
@@acecomet Pure stupid consumerism product.
Tascam US2400 has 24 faders, transport, midi custom and no issue in 15 years. $400 on the used market.
HOLY CRAP, we've hit the motherlode! This could be the first time in years I actually have a reason to ditch my Qcons and all the Mackie protocol limitations for a controllerthat actually works with Cubase. I love my CC121 too but I want more faders! Perhaps this will give other manufacturers a kick up the rear.
Have used the original fader extensively and this is a great improvement of a great product! They even have a trade-in policy!!
The fader is cool but your multi color T-Shirt is cooler! 😂 it changes color gradually all the time. How cool is that.
I love it! Definitely want to see the finished product taken through its paces
I checked it out. This looks great. The Swedish company Softube appears to offer a bundle of the faders and the console for roughly $1,700 right now (mid Sept 2024). So, if you are already using one of the DAW talking to/from this product (who knows? Probably any major DAW), and especially Cubase, as I am, then this is pretty amazing for getting console function going.
this controller sounds so cool. especially the haptic feedback part. So useful for someone like me who is blind. I hope Softube made sure this and the Console One Channel MKIII has support for screen readers. They did a great job for the previous version. :-)
The perfect fader console for Cubase doesn’t exis…
This honestly looks like the control surface I’ve been waiting for
cool!! I need this!! I also like the way the colour of your T-shirt is changing all the time :-)
Apologies for OT. Hey Dom, I just had occasion to research some instruments offered to me free and went ‘off-Dom’ as long as I could take it. I’m spoiled rotten getting my demos from you. Thanks for the towering excellence of your musicianship, creativity. The combination is quite rare in the realm of demos and engages me in just the way I need. All the best, Peter.
Full review! Thanks Dom!
An easily switchable MIDI cc mode would be the icing on the cake, Dom. I agree. What a great piece of hardware! Looks like under 900 sterling too! 😱😬👊
I was looking into getting the SSL stuff over the last couple of months. I still have a working CC121 but since there is no replacement available I was looking for possible candidates. Luckily I never impulse buy stuff so after seeing this one announced I finally took time to go through videos about it's Cubase integration. THIS IS HUGE! Thanks for posting about this, even with the latency and limit to 100 channels this is the ONLY controller that behaves the way it should in Cubase. Now it's on my list :)
This is great! Thank you! I would like to see a full review 🙏
Realy look fantastic 😊 ! Thank you very much for your enthusiasm
The AVID Artist Mix and the more modern version auto-bank to channels. You can also lock a fader to a single channel. You can also control quick controls. You really need to try one Dom! It's this.. but better. And it has no problem with giant track counts.
I was about to write the same comment
I’ve never used a controller that does NOT bank in ProTools. My experience is limited to ProTools so I don’t know if this is a Cubase thing. Controller channels that don’t bank would be a nightmare!
@MartysMatzoBalls I only use it with cubase. Other PT users may have experience
I don’t think the avid comes with emulations of compressors, eq’s, drive etc, that Softube offers? You’d have to map those to it, I guess? What I love about c1 is that I always know which knob to turn, as their system is so well thought out. I like the Softube channel strips so much, that, apart from creative effects (soundtoys) and reverb (liquidsonics) on the c1’s sends, I only use softube for mixing.
@@TRPJ24 That would be the weakest possible selling point for serious buyers of a control surface.. A downside, in fact.
Very exciting and totally agree - CC, improve the lag and remove track count max of 100 and I’ll buy one.
Loved the video!!!! Coming from you I can guarantee its funtions are spot on! Thank you for the review.
Softube : Simple and Amazing !
This is the controller we were finding! I will of course buy it💪💪
Of course, a possible full review would be interesting. Finally an interesting controller that could be considered as a replacement for the already retired SAC 2.2. Thanks Dom!
First time I have gotten interested in controllers with these features, also the OLED screen and colors of it are a must and great feature
Very very cool! I absolutely agree with what you say at the end about integrating the Console 1 Channel into the Cubase channel strip. If they did this, I would buy one immediately!
I'm excited for this new fader! I love the old one I'm currently using so this is exciting! I hope it can be flush mounted into my desk rack
Yessssssss! Great! That is a game Changer! Plaese let us know more and Yes Softube make it more integratet, baybe a slim 2 Fader version ! TNX 4 Sharing 🤩🤩🤩🤩🤩🤩🤩
Btw, thank you Dom for great channel. I know lot about Cubase using it 10 hrs/day for a decades, but alwa,s find something to learn from you. Thanks again
Hey hey! Nice hardware. Avid's s3 or s1 already have track following tho without any insert per channel. It uses Eucon rather than mackie. But FINALLY someone else managed to do this too. Happy to see that!
Ha, you beat me to it Rico! Yes, Avid has had this for years with Eucon integration...the Artist and S-series have done this for a while. But they're very pricey and Eucon has always felt a bit PT centric. Very excited about this...
@jorisdeman5591 Haha same! Owning a S1 at the moment and integration is fine! But this looks very very promising 👌
Absolute agreement with setting up any/all cc's. GOT to be simple addition, they had to send SOME controller data anyhow.. Nice intro. I don't use Cubase, but this could convince me. This IS something i used to spend days setting up with my keyboards. Great potential product and excellent review.
nice job, Dom, looking forward to the full review! Will def get one
13:15 controling CC with this kind of device will be a real game changer. If you can do that Softube, I buy one of these immediatly !
SSL UF8 do that?
Sweet baby, corn on the cob... Ordered mine this AM. Thanks @Dom Signals.
That Console 1 looks hot 🔥! It would definitely be a game changer if they add that MIDI CC Mode option that you suggested, Dom.
I believe it would be an instant buy for many of us.
FINALLY! AWESOME ❤
Man, Faderport does the same functionality for 5 years)
@@n.l.541 faderport has haptic feedback?
I have Faderport and it does not have the same functionality.
@@ronniemartinssonbonde8445 same it is not the same thing
@@ronniemartinssonbonde8445Icon does the job
3:39 - I refreshed Thomann so fast... well gonna wait on this one x'D
It looks a great combo with the controle.
A full review would be great.
I hope they use some good brand faders like Alps ,P&G, TKD, or something that will last a little bit with all that dancing around
I have a Icon V1-M and I like the hardware and the possibility to extend it with more channels. It's following the channel selection as well. They are working on a MIDI remote script to replace the Mackie protocol and this will provide channel colors on the displays as well. I have access to the development state and it's promising to me. Really unique as far as I know ist the touch panel that allows to configure the buttons as you like.
Dom, I really like your tutorials and reviews and would like to see a review of the V1-M from you
Game changing control surface 🔥🔥🔥
Fantastic ! Now we only need memorable music 🤒
10 faders. SWEET! The embedded haptic control is fly too. But the other features on banking and jump to selection have already been available on AVID's artist mix.
I waited on the UL8.. and now the question is Softube's final integration for other DAWs like S1 and Logic. Waiting for the next review with these other DAWs Dom!
Dom, I was wondering last night -- Could you make a vid on how to create your own drum fills/rolls in electronic music? thanks!!
CC messages would be the cherry on top, I thought the same thing
As you say, this is very exciting news. I want a review when the product and you are ready. I would also love to see your MIDI CC sugestion implemented
Looks interesting. I’d like to see transport controls on it though. Looking forward to the full release and a review would be great. Thanks.
A full review would be great!!
Haptic feedback would be a fantastic feature when trimming automation, to let you know when you’re at the null.
Hi Dom thanks for sharing this video. You are right, with midi cc it would be pretty much perfect. Probably the 100 track limit can be a problem.
Mega cool. Like to see more of it❤
I see that you're using Sylenth1. Can you make a video on your favorite soft synths Dom?
Looks great , I am using Avid 3x S1 and a Dock it really does work well with cubase and even controls the control room !
Jeez now after thinking more about it.. I REALLY wish it had the MIDI CC mode/template ability. Both the units. Would make for incredible workflow. If you have their ear on it, please scream it for us composers!😅😊
Full review indeed! + I'd like to know which channel strip you use mostly. And I support the request for templates man. BTW I'm one of the lucky ones who could find the Channel and Fader MK3 in Canada, and I absolutely love this system. I got the channel first, but then the fader and having both of them makes everything so much easier because I can see my tracks names and the output volumes in one go without having to look up at the screen. I do hope they build a transport system with R W Play Stop etc though.
Full review please, of course! Thnx Dom!
Yes! A full review
this controller looks great and i wanna buy it! buti still wish steinberg develop their own controller again....
Softube is always solid.
YES!! Been having a love/hate with Console One MK2.. (only works half the time😅) but this is everything I could have hoped for.
Wow, this is truly amazing. ❤
I pretty much agree and like what I see there. I'd like to see at least 8 programable encoder knobs because I prefer this for panning and some other adjustments more than faders.
Thank God! I thought I'd never see something like this. I briefly had an SSL UF-1 but couldn't see the point of it. This, on the other hand... 😮
Thanks for the preview. I've been looking forward to this controller for a few months now. However, after watching it, I am worried if I will be able to use it like the previous version 😲. I will probably be one of the few who is perfectly comfortable with using the console1 plugin. In my workflow, I only use it for quick controlling groups or some selected channels and I don't want it to follow other faders. For single tracks I use my beloved Steinberg CC121.
Man i dont think i can add another USB device to my rig, but im starting to make plans to get rid of some USB hookups so i can take advantage of softubes amazing devices. Yes to the review!
I’m trying to NOT buy anything more for my studio. But man, this looks really amazing!
Thanx, Dom, for wonderful preview! Is really Very interesting and progressive controller.
It would be interesting to know the availability and cost of the device.
The track selection is the winner. Still core problem remains that all these devices sit where your keyboard and mouse need to be, and you need both keys and console to mix and change things like plugin settings etc. Unless you have a massive desk not a valid option IMHO.
Have to say that this looks amazing!!!! BUT? It is bound to be expensive, and probably way out of my budget? It is good though. Thanks Dom for sharing this with us. Cheers!
This is nice stuff. I'm familiar with flying faders, but this is really different. Really need to work with Logic Pro X and all Keyboards. Very interesting.
Expand! Expand! YES!!! 😂 Controller: very interesting!
And please: more DOLBY ATMOS / SPATIAL AUDIO in and with Cubase (13)! ❤🙏🏻🌊🐬🌊😘
Great hardware but I’m still in love with my ssl UF8
You have access to sends 4-6 by holding the shift button while pressing send 1-3 (courtesy of chris selim!)
Don’t get sucked into the gear trap everyone you don’t need anything else !
You can already create great music with what you have!
Almost perfect - thank you Dom. But where are the transport-buttons? Or did the both of the new Softube Consoles fit on the Steinberg CC121 as the old ones do?
I'd really appreciate the full review !!!
I agree this is exciting and also agree with your requests.
Am I the only one who wonders how Dom's shirt keeps seamlessly changing color throughout?
Ha Ha!!! I laughed out loud when I saw the colour change. As it's a flashy green colour, it's quite easy to change the colour with Resolve or Premiere.
Many good features in Softube CONSOLE 1 fader, but one thing I am missing is the sync with Cubase Mixer and the fader unit, specifically when hiding channels it does not hide the channels in the fader unit. Hope they fix this soon. After testing it seems to work only in Logic Pro X and Pro Tools, but other DAWs it does not.
My ssl nucleus used to do all of that 10 years ago ! Apart from the clipping thing of course! But you didn’t need to put any plugins in the saw first and it would jump to the selection , nothing new there ! Must say it does look good though-)
This is a gorgeous unit, but for a grand? I'm still rocking the Mk1 faders and channel strip.
Would love to see more controllers support control of channel pregain. It's one of my most tweaked knobs that pretty much no hardware supports!!
MIDI CC mode for the whole setup, Controller mk3 and Fader mk3, would make this an absolute nobrainer.
Got mine today! :)
Oh yes MIDI CC and maybe somesomehow a fast smart map capability for any synth VI or even just general plug-in.. GUI would be SO DOPE
I just bought it today. Looks like it's officialy out
@@tihomir7 how much does it cost?
@@lidiaevrika6925 I payed 712 without taxes. There is 200€ or $ discount for users.
@@lidiaevrika6925 there is offer 200€ down for users. Costed me 716€ (wrote 712 first) w/out vat
4:54 The icon qcon does the same with logic, but im glad this feature becomes more common now
Wow…it’s quite amazing how it works with Cubase. Hope it works the same way with Nuendo 🥺
I expect it to work in the exact same way in Nuendo. They use the same MIDI Remote API
I'll be getting haptic feedback all the time on my kick group
He is a Visionary. He is a Revolutionary. He is...
Him !!!!!!!
A CC button next to each fader would be so practical, rather than a missed opportunity. If that happened, I would buy it. At the moment it has no benefit to me, I'm sad to say. Let's hope Softube picks up on this. I'm glad you have the same thoughts Dom.
The good news is this is not a missed opportunity. Softube can easily use a combination of keys (eg shift+fader) and give us this function in the future :)
@@DomSigalas As stated, let's hope so. Just one button near the faders without having to keep going into sub menus all the time. CC control has always been a priority with orchestral composing. My BCF 2000 and Korg Nano Kontrol serve me well.
@@AMBIOSIS I don't think it needs to be menu diving :) I wouldn't mind a combination of keys- it's better because I hate hitting a button accidentally and going into CC mode ;) Softube are great people and they listen (actually, they implemented several things after I gave them feedback that are already there!)- this was my first request since I started using the prototype :)
@@DomSigalas I totally agree with you Dom, for sure. An extra 'CC' button just under the 'MUTE' button maybe? Could surely not be hit by accident? Like I said, if that was implemented, maybe in the MKIV, I would buy it for sure. This MKIII has already been pressed out in the design shop, so it won't happen with this one. Don't get me wrong, it looks absolutely great with Cubase integration, I wonder if it does so in Wavelab 12 Pro? I nearly bought the MKII, but was told to wait and have a look at the MKIII, glad I did.
I would love this for live mixing when using a rack mixer and an iPad. It’s so much better to have real faders under your fingertips. I wonder if that would be possible??
Looks a great controller but, as someone else has also noted, the Avid S1 already does channel following and pretty much all that has been noted here (except the haptic stuff) without having a plugin on each channel, so it's not the only one out there. I use 4 to give me a 32 channel desk, allowing me control Cubase and any plugin, all fully integrated via Eucon.
I have used the Avid Eucon.
Two problems though:
1. It’s primarily targeted towards PT users
2. The new models have this iPad slot that i for one would hate to see on my desk every day without an iPad attached to it.
3. You need an iPad to get the most out of it
4. If you want to get the nice old Eucons you have to buy second hand and with no warranty. And their faders are prone to failing from what is being said.
5. If you have the S1 and love it this is AMAZING news . I was considering it for ages I won’t lie so I see your point 100%
If was using PT I would probably evaluate this differently but for Cubase the Softube is a winner once the software is finalized ;)
@@DomSigalas Oh absolutely - there are some things about my set up that could be better, but all in all it works great for me and does what it says on the tin pretty much every day so its an option. The softube kit does look amazing though i have to say.
Love the channel - I buy a lot of my gear and software because of your reviews including my amazing studiomaster Commander 2.0 desk - so keep em coming buddy :D
Yes, full review, please.
Question: Can the Fader MK3 be used (its faders that is) for gain-staging as well (not only Valume)?
Using Cubase 13 I hate to "pick and flicker" between Tracks just to access the Gain-knob for each track.
Hey Dom, got the dominator desk and Console 1 but not yet the fader, I'm here because I'm interested in how you've arranged it on your desk, especially since we need to access the front rack desk. I was considering stacking it to the left or placing it side by side above the computer keyboard. Not sure, any though or a video where we can see what you've done?
obviously we need YOUR full review!
Literally every controller out there can follow selected channel. My yamaha 01v96 from 15 years ago as just one exemple 😅
Is there a way to connect one button to the listen button in cubase? I use the listen button all the time when I'm mixing to lower the volume of all other channels by 3 db to focus more on that channel and still hear it in context.