how to remove forks off gsxr - 600 750 1000 - 2001 - 2003
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- FORK SEAL AND DUST KIT USA
amzn.to/37QK5vq
FORK OIL USA
amzn.to/2TdvLZT
__________________
FORK SEAL KIT CANADA
amzn.to/39RWDEl
FORK OIL
amzn.to/2R6dDOW
___________________________________
In preparation of getting the fork seals changed on the project bike I remove the front forks. Very easy to do and this video should help you remove them.
You could also change the front pads and anything to do with the front tire (rotors, bearings etc).
Next video we will be making the spring compressor and jam nut plate tools so stay tuned!
Perfect timing for me to find this video. I'm swapping '05 600 forks to my '02 750. I had a pretty good idea of how to do it but it always helps to actually see it done
Yeah buddy
So
I'm going to go for it.
Been almost 2 years of weeping seals.
Buying everything I need tomorrow
go for it bro! !! !
I'll use my GoPro to hopefully document, well,
what I do
This was really helpful for me man, need to get the forks out of my 1999 750 gsxr srad and now i know how to! iv subscribed cheers.
thanks brother! srads rock.
I need to do this on my track bike sazuki 600 gsxr its got Maxton front forks ones leaking
Thank you for the video
No worries brother ride safe. 👌
I'm happy I found this video!
Is there any spacers between rim and forks?
Will the forks off of a 2001 Suzuki 600 katana 600 fit my 2001 Suzuki GSX750F katana
if you check out the gsxr.com forum and gixxer forum there are threads sticky'd with interchangeable parts
Hi Gilbert! Thank you again for good video support! I've assembled everything except the left and right brake saddle. Question: Did I loose a bushing for the right side (in driving direction) between wheel and fork or is ther none?? The wheel can move on the axle without with brake saddles to the right?? Left side is limited by the screw bushing where the axle gets screwed in. This looks creepy because it seems the centering is only the job of the Brake pads. Again, did I miss or loose something?
Thank you and greetings from Germany!
Tobi
It's been Alcan you point to it at the video and tell me the time stamp ? Thanks
@@GilbertGardens At 7:22 you see a gap between Fork and wheel. I fear that I have lost a part. At 7:30 you pull axle to the left. Is there a part helping to center the wheel?
@@vespa-garage9215 I don't believe so . Once I loosen the fork bolts that tighten the Forks to the axle it just slides out. If your unsure though go to a parts site with the diagrams. You should be able to see all the parts exploded. I'll look when I get on the laptop.
@@GilbertGardens Found some explosion pictures. Still I am struggling...
Can you send me a link for everything I need to do the fork seal change on a 2001 gsxr 750
honestly id just google it or check ebay there should be tons. I know all balls has some after market ones. There are part diagrams that show exactly what you need.
@@GilbertGardens okay and one more thing I have the same bike as you and I have just the left fork leaking how can I just add a little oil for that side hoist it up and take the caps off and just add some oil lol?
@@brucehamman4201 if the seals are gone you need to replace. When fork oil leaks out it eats paint and destroys brake pads. If you has soaked into the pads they need to be changed.
@@GilbertGardens okay I’m going to take them off and have someone do the seals for me thanks.
Question !! You think a 1000 k2 forks will fit on my k2 600 ?
99 percent sure 01 and 02 are the same
@@GilbertGardens cuz I like the bronze look . So I was wondering !
@@ld7947 they should go fine I out 1000 forks on the 750 triple tree