Ford Ranger and Mazda BT50 Twin Cooler Install
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- David from Wholesale Automatics demonstrates how to install a Transmission Oil Cooler into a 6 Speed PX Ford Ranger. This kit also applies to the 6 speed Mazda BT50 built prior to Jul 2020.
Ford Ranger PX 6spd - automatictrans...
Mazda BT50 UR/UP 6spd -automatictrans...
Do I need a transmission cooler? Those who tow, carry any sort of load or go offroad should definitely run a dedicated transmission cooler. As the largest 4WD auto transmission specialist in the southern hemisphere we know experientially that heat causes wear, reduces performance and causes costly breakdowns.
At Wholesale Automatics we have model specific DIY transmission oil cooler kits to suit your needs.
Wholesale Automatic Transmissions - automatictrans...
I just installed mine yesterday 20 2019 ranger with65K on clock, what a massive difference, i have already fitted the bypass valve few years back, and my trans ran from 94-97 degrees, yesterday the ambient temp was 19 degrees, and now the trans oil only got to 55 degrees after driving for 30 minutes, i suspect in summer it would probable go 20-25 degrees hotter which would put it at 75-80 degrees is my guess, never the less very happy with the result, :)
Hi that was one of best informative easy to follow video I have seen thanks
Glad it was helpful!
You made it look easy.well done
Thank you! Cheers!
Why you dont have a video for the intstallation for the new ranger?
Gday, that’s was a good informative video, cheers
Glad you enjoyed it
Love the product but does it effect the radiator efficiency since you are blocking most of the radiator?
No not at all and thoroughly tested multiple times, towing, not towing, mountain ranges add different ambient temps. In some case the engine temp dropped as it was no longer dealing with the trans heat exchange any more.
Would one need more transmission fluid than usual aftervthe extra coolers?
excelente
Hi mate great video. I've started hooking into mine question brains trust so the hoses that go to the unions on the transmission is there a left and right sequence ?
Yes there is as explained in this video and in the install instructions that come with the cooler.
Question I have a 2014, 3.2 Ranger PX1 is the thermal inside the transmission or is accessible externally. Thanks loved your install video.
The Thermal valve is in the transmission above the valve body. You need to remove the valve body to get to it.
Can you fill up the coolers before conectig them to the gearbox?
No you don't need to as it's a pressurised system that will self fill and push all the air out of the system.
That's a great explanation video for swapping out the hot water heat exchanger, ( bad design personally) for an air cooled radiator oil flow system. But what pumps the ATF around and through the rad/ pipe circuit? Is there a pump fitted inside the Trans box? I'd😅 love to purchase this upgrade, plus the
aluminium pan with drain plug. Unfortunately I'm stuck out in Cambodia, I've inquired but there's no stock here. Mmm
You can buy direct online and we do ship to Cambodia.
Do I need to remove the grill on my 2014 BT50?
No not at all, cooler is installed from underneath and is positioned behind the intercooler.
Does this work on the ford everests aswell?
Different kit for the Everest but we have them in stock also.
bit of a long shot asking on here but have you seen any bt50s or ford rangers with the 3.2L autos revs bouncing on the tacometer, im unsure if its a transmission issue or engine issue, the
oil is black so im about to install one of your service kits
Take it in to a local transmission shop and they will soon point you in the right direction.
Any chance of one for a Dmax
Yes we do. Here is a link to the cooler page:
automatictransmission.com.au/heavy-duty-transmission-coolers/